1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Csf2314 capacity

Discussion in '1st Gen 4Runners (1984-1989)' started by IBBCO, Apr 30, 2020.

  1. Apr 30, 2020 at 4:35 PM
    #1
    IBBCO

    #1
    IBBCO [OP] New Member

    Joined:
    Apr 30, 2020
    Member:
    #14068
    Messages:
    3
    Gender:
    Male
    Prescott Az.
    Vehicle:
    86 4runner
    Just bought a csf2314 3 row radiator for my 86 4runner. Trucks kept at house in baja.
    Trying to find out what fluid capacity is.
    Need to bring water and coolant with me.
    Anyone know. Can't find info. Anywhere.
     
    IBBCO, Apr 30, 2020
    #1
  2. Apr 30, 2020 at 5:12 PM
    #2
    BestGen

    #2
    BestGen Member #57

    Joined:
    Apr 12, 2014
    Member:
    #57
    Messages:
    954
    Gender:
    Male
    First Name:
    Paul
    Haunted Turnbull Canyon, CA
    Vehicle:
    1988 4Runner XTE 22RE/W56, '93 G144 4.88s, Spartan Locker, AllPro Sliders, OEM 15x6" rims, BFG KM2 33/10.5s, 4Crawler 1.5" BJS, OME 2" Dakar springs, TG rear bumper.
    33"KM2s, 4.88s, Spartan Locker, TG rear bumper, AllPro Kickout sliders, 4Crawler 1.5" BJS, OME 2" Dakar springs.
    Not exactly sure either. I'll have to check my FSM. I'd just take 3 or 4 gallons of Zerex Red specifically for Toyota. If you have some leftover that's fine because you'll need to top off periodically anyway.
     
    BestGen, Apr 30, 2020
    #2
  3. Apr 30, 2020 at 6:06 PM
    #3
    IBBCO

    #3
    IBBCO [OP] New Member

    Joined:
    Apr 30, 2020
    Member:
    #14068
    Messages:
    3
    Gender:
    Male
    Prescott Az.
    Vehicle:
    86 4runner
    Probably my best bet
    Thanks
     
    IBBCO, Apr 30, 2020
    #3
    BestGen likes this.
  4. Apr 30, 2020 at 8:55 PM
    #4
    BestGen

    #4
    BestGen Member #57

    Joined:
    Apr 12, 2014
    Member:
    #57
    Messages:
    954
    Gender:
    Male
    First Name:
    Paul
    Haunted Turnbull Canyon, CA
    Vehicle:
    1988 4Runner XTE 22RE/W56, '93 G144 4.88s, Spartan Locker, AllPro Sliders, OEM 15x6" rims, BFG KM2 33/10.5s, 4Crawler 1.5" BJS, OME 2" Dakar springs, TG rear bumper.
    33"KM2s, 4.88s, Spartan Locker, TG rear bumper, AllPro Kickout sliders, 4Crawler 1.5" BJS, OME 2" Dakar springs.
    According to the Toyota bible... @IBBCOIMG_3479.jpg8.9 US qts. 9.6 if you have an automatic
     
    BestGen, Apr 30, 2020
    #4
  5. May 1, 2020 at 12:26 PM
    #5
    PhantomTweak

    #5
    PhantomTweak New Member

    Joined:
    Dec 20, 2019
    Member:
    #12402
    Messages:
    1,225
    Gender:
    Male
    First Name:
    Patrick
    OREGON
    Vehicle:
    1999 4Runner, bone stock
    None. Bone Stock. EXCEPT: Brushguard, tow hitch, both welded to the frame. It's good to have friends and a fully equipped garage!
    I seem to recall that when I put 3-cores into my 87 pickup and 4Runner, when I lived in Yuma, Az, it added about 1/2 to 3/4 of a quart to the system overall. So, if the FSM says it will take X amount of coolant, plan on it taking X+3/4 of a quart.

    Don't forget to burp it really well!
    Pat☺
     
    PhantomTweak, May 1, 2020
    #5
  6. May 2, 2020 at 9:57 AM
    #6
    IBBCO

    #6
    IBBCO [OP] New Member

    Joined:
    Apr 30, 2020
    Member:
    #14068
    Messages:
    3
    Gender:
    Male
    Prescott Az.
    Vehicle:
    86 4runner
    thanks
     
    IBBCO, May 2, 2020
    #6
Register FREE to Reply!
To Top