1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Auto Transmission service

Discussion in '3rd Gen 4Runners (1996-2002)' started by SR5 Limited, Jul 5, 2024.

  1. Jul 5, 2024 at 9:46 AM
    #1
    SR5 Limited

    SR5 Limited [OP] New Member

    Joined:
    Sep 18, 2018
    Member:
    #7180
    Messages:
    13,236
    Vehicle:
    1996 SR5 Limited
    Drain pan, holds two quarts, then refill through dipstick hole. Torque drain bolt to 20 ft#'s.
    Part numbers:
    Fluid, 00718ATF00
    Crush Washer, 35178-30010
     
  2. Jul 5, 2024 at 9:55 AM
    #2
    Acesandeights

    Acesandeights #34

    Joined:
    Apr 16, 2024
    Member:
    #39864
    Messages:
    726
    So Oregon
    Vehicle:
    2024 ORP
    265/70/17 BFG AT KO2, chapstick in the cup holder
    Does the drain pan hold two quarts, or do you drain the pain and hold two quarts. How much to refill through the dipstick hole?
     
  3. Jul 5, 2024 at 10:03 AM
    #3
    SR5 Limited

    SR5 Limited [OP] New Member

    Joined:
    Sep 18, 2018
    Member:
    #7180
    Messages:
    13,236
    Vehicle:
    1996 SR5 Limited
    Yes, it holds two quarts per Haynes repair manual.
    So refill with two quarts and check level while engine is running.
    It only takes one pint to bring the level from the "cool" mark to the "hot" mark so top it off a little at a time.
     
  4. Jul 5, 2024 at 10:06 AM
    #4
    SR5 Limited

    SR5 Limited [OP] New Member

    Joined:
    Sep 18, 2018
    Member:
    #7180
    Messages:
    13,236
    Vehicle:
    1996 SR5 Limited
    I drained mine and then filled two quarts in an empty oil quart bottle. So its two quarts.
     
  5. Jul 5, 2024 at 10:09 AM
    #5
    Acesandeights

    Acesandeights #34

    Joined:
    Apr 16, 2024
    Member:
    #39864
    Messages:
    726
    So Oregon
    Vehicle:
    2024 ORP
    265/70/17 BFG AT KO2, chapstick in the cup holder
    How did you get two quarts in an empty quart bottle?
     
  6. Jul 5, 2024 at 10:12 AM
    #6
    SR5 Limited

    SR5 Limited [OP] New Member

    Joined:
    Sep 18, 2018
    Member:
    #7180
    Messages:
    13,236
    Vehicle:
    1996 SR5 Limited
    One at a time.
     
  7. Jul 5, 2024 at 12:43 PM
    #7
    Ahdofu

    Ahdofu New Member

    Joined:
    Dec 14, 2020
    Member:
    #18506
    Messages:
    309
    Gender:
    Male
    First Name:
    Matt
    Vehicle:
    1997 4Runner SR5, V6, Auto, 4WD
    The transmission holds much more fluid than 2 quarts with most of the fluid staying in the torque converter. I don't quite recall the exact volume but I think it is more than 10 quarts. Using the drain plug does not completely replace all the fluid. I suppose by doing several drain/fill cycles, one can freshen up the fluid.
     
  8. Jul 5, 2024 at 1:10 PM
    #8
    SR5 Limited

    SR5 Limited [OP] New Member

    Joined:
    Sep 18, 2018
    Member:
    #7180
    Messages:
    13,236
    Vehicle:
    1996 SR5 Limited
    I actually thought of this myself. I figure just do it when you change the oil.
     
  9. Jul 5, 2024 at 3:11 PM
    #9
    SR5 Limited

    SR5 Limited [OP] New Member

    Joined:
    Sep 18, 2018
    Member:
    #7180
    Messages:
    13,236
    Vehicle:
    1996 SR5 Limited
    GD Dealer $3.53 a crush washer and $15.99 a quart.
     

Products Discussed in

To Top