1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Are 4runners prone to vibration or shake in steering wheel when approaching freeway speeds

Discussion in '5th Gen 4Runners (2010-2024)' started by Breeze, Apr 11, 2023.

  1. Apr 11, 2023 at 7:46 AM
    #1
    Breeze

    Breeze [OP] New Member

    Joined:
    Apr 3, 2023
    Member:
    #32148
    Messages:
    58
    Gender:
    Male
    First Name:
    Breeze
    AZ
    Vehicle:
    2023 Limited. Silver exterior/redwood interior. No 3rd row.
    Auto running boards.
    Hello all, we are shopping 4runners and finding many like new units for sale with close to 20k miles. Most we have test driven have a vibration or slight shake when getting up to freeway speed of 55-65 or more miles per hour. Is that also a common thread for the 4runner? We are going to test drive a used 2022 model today and hopefully things go well, I'll report back with findings.
     
    Tmiesowicz likes this.
  2. Apr 11, 2023 at 8:02 AM
    #2
    Spare Parts

    Spare Parts New Member

    Joined:
    May 13, 2020
    Member:
    #14274
    Messages:
    2,764
    Gender:
    Male
    Southern Maine
    Vehicle:
    22 LR ORP
    Sherpa Crestone. 4X Innovations Sliders
    It’s a tire balancing issue. Many experience it, but if balanced properly, it can be fixed.

    This has been discussed in depth here a few times, and there are some who says it’s just part of driving a runner, while others have had it solved.
     
    Last edited: Apr 11, 2023
  3. Apr 11, 2023 at 8:03 AM
    #3
    Spare Parts

    Spare Parts New Member

    Joined:
    May 13, 2020
    Member:
    #14274
    Messages:
    2,764
    Gender:
    Male
    Southern Maine
    Vehicle:
    22 LR ORP
    Sherpa Crestone. 4X Innovations Sliders
  4. Apr 11, 2023 at 8:05 AM
    #4
    PC836

    PC836 New Member

    Joined:
    Jun 30, 2022
    Member:
    #27629
    Messages:
    98
    Gender:
    Male
    Fresno, Ca
    Vehicle:
    2022 White 4Runner PRO
    Balance and alignment issues. Mine wasnt done when it arrived at the port when PRO wheels and tires were put on. Took it into dealer at 250 miles under warranty and problem solved.
     
    Breeze[OP] likes this.
  5. Apr 11, 2023 at 8:33 AM
    #5
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    5,452
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s
    Not sure how the market is around you, but are there any new 4runners to test drive? I always would worry about any used car and why it was sold off to begin with. Maybe most of the low miles used cars are the regret cars, something was off with them, and the owners just sold it to move on. Oddly enough, new 4runners are often cheaper than used, so it might be worth looking for one to test drive.

    Usually it’s just a wheel balance or tire problem. I dont know if this is the right word, but 4runners are a bit…jiggly. A solid, firm jiggly, mind you, not necessarily a bad thing. Body on frame, lots of rubber bushings in between all the hard bits, and the weight can do that. If there is a vibration somewhere at the right frequency, it can set off a shimmy in the front end.

    But yes, some owners have a really hard time getting rid of shimmy once they get it.
     
  6. Apr 11, 2023 at 8:53 AM
    #6
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,457
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    I've never had that, it is not a blanket issue for all 4Runners. At least with my 2016, steering wheel doesn't shake even at 100km/hr, nothing
     
  7. Apr 11, 2023 at 9:31 AM
    #7
    HotelMedicis

    HotelMedicis No Commercial Interests

    Joined:
    Nov 5, 2022
    Member:
    #29434
    Messages:
    423
    Zero shake or vibration at any speed in my 2023. Very smooth on the stock Bridgestone tires.
     
    Thatbassguy and Breeze[OP] like this.
  8. Apr 11, 2023 at 9:48 AM
    #8
    kmeeg

    kmeeg New Member

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    5,197
    Gender:
    Male
    Have discussed multiple times but with my experience it depends on the wheel balance shop. I've been using Hunter Road Force wheel balance service at DiscountTire and don't have issues even with much hated BFG KO2. I also use factory wheels so don't have any experience with aftermarket wheels.

    Right out the dealership the only poor quality I experience was with my TRD Pro with this vibration, But I won't complain on Toyota quality of Japan Tahara factory because most of the TRD Pro stuff including wheels and tires) is bolted-on in USA facility. So I won't expect Toyota Japan quality on TRD Pro.
     
    Thatbassguy and Breeze[OP] like this.
  9. Apr 11, 2023 at 10:01 AM
    #9
    scanny

    scanny New Member

    Joined:
    Mar 14, 2022
    Member:
    #26121
    Messages:
    287
    Gender:
    Male
    Ontario, Canada
    I had shake once, one of my tires went out of balance.
     
    Breeze[OP] and Thatbassguy like this.
  10. Apr 11, 2023 at 10:28 AM
    #10
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,615
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    I'm just going to repeat what's been said. They seem to be sensitive to out of balance tires. Mine shimmied some with the stock tires. I've had to rebalance tires, occasionally, due to weights coming off. But, I have always been able to get it smooth, with 3 sets of aftermarket tires.
     
  11. Apr 11, 2023 at 10:31 AM
    #11
    Spare Parts

    Spare Parts New Member

    Joined:
    May 13, 2020
    Member:
    #14274
    Messages:
    2,764
    Gender:
    Male
    Southern Maine
    Vehicle:
    22 LR ORP
    Sherpa Crestone. 4X Innovations Sliders
    Report back once you replace the factory tires. I have a set of tires on some pro rims from my tacoma that I needed balanced twice. Once I put them on the runner, I got a slight vibration, once I switched back to the factory tires and wheels, smooth.
     
    Breeze[OP] and Thatbassguy like this.
  12. Apr 11, 2023 at 10:33 AM
    #12
    NorthernSailor

    NorthernSailor New Member

    Joined:
    Apr 4, 2023
    Member:
    #32167
    Messages:
    82
    Gender:
    Male
    Alberta
    Vehicle:
    2023 Black 40th Anniversary
    Elka 2.0's up front, Sherpa rack, WeBoost Overland cellular booster, Nokian Outpost rubber
    I don't even bother with normal tire balancing anymore, those Hunter machines get fantastic results.

    My last vehicle had horrid duratrac's, and thanks to the shop with a Hunter machine, Goodyear warrantied 3 of my tires because they were so out of round. They were able to get the replacements within the yellow zone, and the vibration was almost completely gone. When I finally got rid of those and got some Falken AT winters put on, the Hunter made them smooth as silk.
     
  13. Apr 11, 2023 at 11:08 AM
    #13
    topdec

    topdec New Member

    Joined:
    Jun 30, 2016
    Member:
    #2241
    Messages:
    309
    Gender:
    Male
    Vehicle:
    2023 4R ORP CSM 2023 Tundra LTD ORP. 2016 4R TE (sold)
    The only steering wheel vibration I remember with my previous 2016 TE that had Cooper AT3 4S 255/75R17s was during the 1st few miles in the morning. It felt like the tires where out of round from sitting too long.

    The tires I had were taller but narrower than stock. Also, maybe it's worth mentioning that TE/OR models have a wheel that is 0.5" wider than the pro.

    I guess this issue is another pre-delivery checklist item for me.
     
    Last edited: Apr 11, 2023
    Breeze[OP] likes this.
  14. Apr 11, 2023 at 11:31 AM
    #14
    Lou

    Lou New Member

    Joined:
    Oct 4, 2021
    Member:
    #23651
    Messages:
    193
    Vehicle:
    2021 TRD Off Road Premium
    Nothing on my 2021 ORP
     
    Breeze[OP] likes this.
  15. Apr 11, 2023 at 11:51 AM
    #15
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,457
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Sometimes building your own TRD, your own PRO, has its benefits. Slappin BFG's on a bolted on trim with positive offset wheels ain't always the same
     
    Breeze[OP] likes this.
  16. Apr 11, 2023 at 1:02 PM
    #16
    HotelMedicis

    HotelMedicis No Commercial Interests

    Joined:
    Nov 5, 2022
    Member:
    #29434
    Messages:
    423
    It's unlikely that I'll replace the tires before 2028 unless I purchase a set of snow tires for some unforeseen furfuraceous adventure
     
    Breeze[OP] and Thatbassguy like this.
  17. Apr 11, 2023 at 1:45 PM
    #17
    5six

    5six New Member

    Joined:
    Mar 22, 2022
    Member:
    #26248
    Messages:
    585
    Gender:
    Male
    First Name:
    55_4Runner
    GTA, Ontario, Canada
    Vehicle:
    2022 Black TRD ORP
    Ceramic tint (all glass), Toyo AT3s 285/70 C load, Eibach Pro Truck Stage 2 suspension, Ironman UCA, Cartrimhome TRD skid plate, RCI skids (rear diff, transmission, filler plate, catalytic anti theft), SwitchPro 9100 & MT Plate, Caliraised ditch lights & brackets, Caliraised molle panels, Sherpa roof rack, Westcott ladder, Weathertech window visors, Meso & LED interior bulbs, black badging, Weathertech mats, Husky cargo liner, Canvasback rear seat backing, Smittybilt 2781, Morrflate Quad, ARB Diff Breather, Ultimate9, TRD Pro rims, GTR Carbide headlights, DIY Knight Rider light strip.
    I had it when I changed over to my first set of stock sized AT3s. Went back to the tire shop and got them to rebalance it, and perfecto! I changed over rims and tires on the weekend, now 285s and still smooth.
     
    Breeze[OP] likes this.
  18. Apr 11, 2023 at 1:54 PM
    #18
    Ripper238

    Ripper238 New Member

    Joined:
    Jan 21, 2023
    Member:
    #30792
    Messages:
    923
    Gender:
    Male
    Vehicle:
    2019 TRD OR
    No vibration on my 2019, even after switching to AT/Mud tires still no vibration or shake. But i did stick with stock tire weight/size. 65k an no alignment yet.
     
    Last edited: Apr 11, 2023
    Breeze[OP] likes this.
  19. Apr 11, 2023 at 2:17 PM
    #19
    Tama1968

    Tama1968 New Member

    Joined:
    Jan 2, 2016
    Member:
    #1353
    Messages:
    704
    Gender:
    Male
    Florida
    Vehicle:
    T4R SR5 in Classic Silver
    my 2019 SR5 does not, even with the original tires on 72k miles. only thing close to that , that I note is if I'm behind a tractor trailer at speed, I get a little more sway in response to the 'wake' from the truck than I was used to in other vehicles, but otherwise, she's pretty solid
     
    Breeze[OP] likes this.
  20. Apr 12, 2023 at 9:03 AM
    #20
    danssr5

    danssr5 New Member

    Joined:
    May 29, 2019
    Member:
    #10078
    Messages:
    176
    Gender:
    Male
    First Name:
    Dan
    Vehicle:
    2017 sr5 premium 4x4
    bridgestone revo 3 5100's @2.5/1.5. Stock springs & rear daystar 1.5" spacers
    This happened on both my 4runners however once the tires heated up it 100% went away. I believe its the cold that does this. The vibration is very minimal and goes away quick.
     
    Breeze[QUOTED][OP] likes this.
  21. Apr 12, 2023 at 9:06 AM
    #21
    Connor MacLeod

    Connor MacLeod New Member

    Joined:
    Nov 27, 2022
    Member:
    #29802
    Messages:
    133
    Gender:
    Male
    First Name:
    Connor
    Vehicle:
    2023 TRD Off Road
    Same here. No issues on my '23 OR, with either the stock tires or Cooper Rugged Treks.
     
    Breeze[OP] likes this.
  22. Apr 12, 2023 at 9:06 AM
    #22
    anthonydotb

    anthonydotb ig: @phantom.rnr

    Joined:
    Oct 25, 2019
    Member:
    #11777
    Messages:
    70
    Gender:
    Male
    First Name:
    Anthony
    Vehicle:
    T4R Trail Edition Premium KDSS
    None yet
    Definitely a tire balance issue. Happens to mine all the time with my mud terrains (Cooper Evolution). This now reminds me that I'm due for a tire rotation.
     
    nimby and Breeze[OP] like this.
  23. Apr 12, 2023 at 10:03 AM
    #23
    salvojimmy

    salvojimmy New Member

    Joined:
    Jan 21, 2023
    Member:
    #30789
    Messages:
    215
    Gender:
    Male
    Glen Allen VA
    Vehicle:
    2022 SR5P
    No Mods Yet
    I have had 4 TR4s. 2000, 2004 (lifted), 2015, now 2022 and none have ever had any front end shake. But they were always checked and properly aligned and balanced when needed. The 2000 and 2004 had replacement tires, the 2004 with oversized. Others only stock. Rims all stock.
     
    Breeze[OP] likes this.
  24. Apr 12, 2023 at 11:58 AM
    #24
    Breeze

    Breeze [OP] New Member

    Joined:
    Apr 3, 2023
    Member:
    #32148
    Messages:
    58
    Gender:
    Male
    First Name:
    Breeze
    AZ
    Vehicle:
    2023 Limited. Silver exterior/redwood interior. No 3rd row.
    Auto running boards.
    Hello again everyone. We test drove 2022 sr5 premium last, stock tire & wheel set up. It was night and day difference from the 2 previous used 2022 4runners from Toyota dealership, one had been lifted. Not good from the start, never acceded 40 mph before returning to dealership. I know have faith that a stock 4runner can be driven at freeway speeds without vibration in steering wheel.
     
  25. Apr 12, 2023 at 2:08 PM
    #25
    fastedd27

    fastedd27 New Member

    Joined:
    Apr 12, 2023
    Member:
    #32319
    Messages:
    1
    Gender:
    Male
    Balancing was the issue here too. However I still have a little shimmy on cold mornings until the tires warm up. The tech I spoke with was the one that confirmed that the cold tire shimmy was a thing especially with off road tires.
     
    Breeze[OP] likes this.
  26. Apr 12, 2023 at 4:57 PM
    #26
    Foothills

    Foothills New Member

    Joined:
    Nov 2, 2022
    Member:
    #29388
    Messages:
    274
    Our 2014 SR5 with 140k miles and new 20" Michelin Defender tires on T4R Limited rims steers, rides and drives like a new vehicle with no body sway or vibration at any speed up to 90 mph.
     
    Last edited: Apr 15, 2023
    Breeze[OP] likes this.
  27. Apr 13, 2023 at 2:57 PM
    #27
    glwood54

    glwood54 Stop making me buy stuff!

    Joined:
    Aug 19, 2019
    Member:
    #10964
    Messages:
    6,589
    Gender:
    Male
    First Name:
    Gary
    Albuquerque, NM
    Vehicle:
    2019 OR, KDSS, RSG sliders, Eibach shocks, 265/70 Falken Wildpeaks
    Is that referring to the previous 2 driven?
     
    Breeze[QUOTED][OP] likes this.
  28. Apr 13, 2023 at 5:35 PM
    #28
    Stangheel

    Stangheel New Member

    Joined:
    Mar 22, 2023
    Member:
    #31907
    Messages:
    13
    Gender:
    Male
    First Name:
    Chris
    Vehicle:
    2021 Grey SR5
    Stock
    No issue on my 2021 SR5 up to around 80-85 mph. Stock wheels and the tires were replaced by the dealership before I bought it with some crappy ones. As others have said, it's probably a balance issue. I'm just surprised the ones you are test driving, if they are at dealerships, haven't been corrected before they are putting them on the lot.
     
    Breeze[OP] likes this.
  29. Apr 13, 2023 at 9:59 PM
    #29
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    5,452
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s

    Honestly, I’d be surprised if they drove them at all…besides off the truck that brought them in. Dealers probably spend their time detailing cars when they receive them, and filling out check marks on a “multi-point inspection” form, completed by anyone that knows how to work a pencil.

    Cars are moving so fast that they’d probably rather deal with problems post-sale.
     
    nimby and Breeze[OP] like this.
  30. Apr 14, 2023 at 4:38 AM
    #30
    Stangheel

    Stangheel New Member

    Joined:
    Mar 22, 2023
    Member:
    #31907
    Messages:
    13
    Gender:
    Male
    First Name:
    Chris
    Vehicle:
    2021 Grey SR5
    Stock
    Well since I actually have experience with this… I can’t speak for all dealerships, but the one I worked at and actually did the used car inspections for years. We completely looked EVERYTHING over on the cars that came through. The other tech and I spent hours on each and every car. It’s a huge liability to let something slip through and then go wrong with the customer. I appreciate everyone’s hate for dealerships but they’re not all bad. I will state though that even when we pointed things out that needed to be done didn’t mean the used car manager approved us to fix them. I never saw tires, alignment or a safety issue not get approved though. Again, that’s a huge liability and really anyone with a conscience is not going to let things like that slide. Also again, I can’t speak for any other dealership but the one I worked at. And no, they don’t want customers to come back and deal with problems post sale. Thank you, and rant over.
     

Products Discussed in

To Top