Any help with a 4 runner question concerning VSS

Recently lost the tach,speed, fuel, temp and all digital read-outs on my 2006 4 runner. Got a ABS malfunction fault and a P500 fault. When checking the wiring on the vss for voltage, I found .8 vdc at both terminals of the plug, and a pin probe at the "ECU" also showed .8 vdc on the Red with blue trace as well as the Blue w/ Yellow trace. Both wires showed no shorts opens or grounds. Should the voltage from the "ECU" be in the 10+VDC range? Not sure if I should proceed or button it up, then install a "GPS" speed monitor and maybe a oil pressure and temp gauge, or just drive blind until it no longer wants to move. Any help,suggestions or extra info out there

 

Welcome

 

Welcome from Wisconsin!