Any early 5th gens 2010-2013 SR5s running 34s?

I'm seriously considering running 34s (285/75r17) on stock wheels on my newly lifted 2013 SR5. I installed the Ironman 4x4 Stage 4 lift with 2.5" front and 2" rear lift (though I netted a little more than 2.5" in the front), new UCA's, adjustable panhard bar, and rear trailing arms. I also got extended front bumpstops, rear bumpstop extensions, and longer rear brake lines. I wanted to get some ideas from early 5th gen owners here that run 34's, specifically 285/75r17s, on their early 5th gen 4Runner. I'm pretty sure a BMC will be needed which I plan to do but I'm more interested in what needed to be cut in the area around the front bumper and fender liner. I'm also aware that I might have to possibly run a 1" wheel spacer to clear the UCA. If anyone could share some pictures of what they did to clear 34's and that actually do some off roading.

Thank you!

 

Aggressive BMC, heat gun to remold front of fender liner, trimming of fender liner, and flatten pinch weld

 

Any pictures?

 

I'll try and take some this weekend.