1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

ADD front diff

Discussion in '1st Gen 4Runners (1984-1989)' started by 4scooter19, Mar 24, 2019.

  1. Mar 24, 2019 at 4:53 PM
    #1
    4scooter19

    #1
    4scooter19 [OP] New Member

    Joined:
    Feb 23, 2019
    Member:
    #8920
    Messages:
    1,338
    Gender:
    Male
    Oregon
    Vehicle:
    98 and 86 4Runners
    My brother in law has a 95 4runner with a G144 axle code. Not running at the moment and is pretty much a parts rig. He said I can have the rear third member and front diff if I swap mine in when I take his. My question is regarding the ADD. BestGen sent me some very good info on what he did for his. Will the longside axle from the 95 work on my 86 front diff? From what I gathered from BestGen I will need my longside on the 95 diff to get around the ADD, just wondering if it works vice versa before I pull it apart.
     
    4scooter19, Mar 24, 2019
    #1
    BestGen likes this.
  2. Mar 25, 2019 at 7:58 AM
    #2
    BestGen

    #2
    BestGen Member #57

    Joined:
    Apr 12, 2014
    Member:
    #57
    Messages:
    954
    Gender:
    Male
    First Name:
    Paul
    Haunted Turnbull Canyon, CA
    Vehicle:
    1988 4Runner XTE 22RE/W56, '93 G144 4.88s, Spartan Locker, AllPro Sliders, OEM 15x6" rims, BFG KM2 33/10.5s, 4Crawler 1.5" BJS, OME 2" Dakar springs, TG rear bumper.
    33"KM2s, 4.88s, Spartan Locker, TG rear bumper, AllPro Kickout sliders, 4Crawler 1.5" BJS, OME 2" Dakar springs.
    You should be able to bolt it back together. If it'll still work,:notsure: I suppose you could reconnect all the vacuum lines needed. Does it need to work? IMG_0254.jpgYou'll need to reuse the long bolts. I just cut mine off since they weren't being used again and the bolt heads need a special socket.
     
    BestGen, Mar 25, 2019
    #2
    4scooter19[OP] likes this.
  3. Mar 25, 2019 at 8:38 AM
    #3
    4scooter19

    #3
    4scooter19 [OP] New Member

    Joined:
    Feb 23, 2019
    Member:
    #8920
    Messages:
    1,338
    Gender:
    Male
    Oregon
    Vehicle:
    98 and 86 4Runners
    Ya he wants it working after the swap, why I'm not sure. The 95 hasn't moved in years. He wants a grand for the whole 4runner. I may just buy it from him, take what I want and scrap it.
     
    4scooter19, Mar 25, 2019
    #3
Register FREE to Reply!
To Top