1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

5th gen 4Runner limited wheel question

Discussion in 'Wheels & Tires' started by Frizzzbee, Oct 30, 2024.

  1. Oct 30, 2024 at 11:39 AM
    #1
    Frizzzbee

    Frizzzbee [OP] New Member

    Joined:
    Oct 30, 2024
    Member:
    #43657
    Messages:
    2
    Gender:
    Male
    First Name:
    Mitch
    Vehicle:
    2011 4Runner limited
    I want to swap my stock 20inch rims on a stock 4Runner limited for 17inch wheels. Any recommendations on offset, width and AT tire size to wrap them in. I want to go as big as possible without any rubbing. Thanks in advance!
     
  2. Oct 30, 2024 at 12:12 PM
    #2
    kmeeg

    kmeeg New Member

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    5,299
    Gender:
    Male
    I have factory TRD Offroad wheels on my Limited. The specs are 17x7.5 +15 offset. I'm using 285/70R17 tires which is within the specs to be run with this wheels.

    I did not pick TRD Pro wheels which has specs 17x7.0 +4offset. TRD Pro wheels do not meet the specs to run 285/70R17 tires when I check few tire manufacture data sheets. Also with +4 offset I might have rubbing issues compared to +15 on TRD Offroad wheels I run.

    I don't offroad my Limited, but if I did TRD Offroad wheels will give me relatively more protection around the valve stem vs TRD Pro wheels.
     
  3. Oct 30, 2024 at 2:05 PM
    #3
    Frizzzbee

    Frizzzbee [OP] New Member

    Joined:
    Oct 30, 2024
    Member:
    #43657
    Messages:
    2
    Gender:
    Male
    First Name:
    Mitch
    Vehicle:
    2011 4Runner limited
    Thanks so much for taking the time to reply!!
     
To Top