1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2016 Trail Owner

Discussion in 'New Member Introductions' started by drdfblackm, Oct 8, 2024.

  1. Oct 8, 2024 at 10:51 AM
    #1
    drdfblackm

    drdfblackm [OP] New Member

    Joined:
    Oct 8, 2024
    Member:
    #43259
    Messages:
    1
    Gender:
    Male
    First Name:
    Darrin
    Vehicle:
    2016 Trail
    Toy Tec Lift with Total Chaos uppers
    I actually thought I was a member of this forum already. Had multiple 4Runners, Tacos and FJ Cruisers. This 4 Runner is hers and bought it off lease many moons ago. Has been a great vehicle and just looking to increase my knowledge.
     
    Last edited: Oct 8, 2024
  2. Oct 8, 2024 at 12:26 PM
    #2
    Steely123

    Steely123 What's the new trend? I'll do it!

    Joined:
    Jun 4, 2022
    Member:
    #27323
    Messages:
    3,621
    Gender:
    Male
    TX
    Vehicle:
    2018 4runner SR5 premium
    welcome
     
  3. Oct 8, 2024 at 4:57 PM
    #3
    JET4

    JET4 Old Member

    Joined:
    Dec 20, 2018
    Member:
    #8147
    Messages:
    4,426
    Gender:
    Male
    Southeast, Va.
    welcome
     
  4. Oct 8, 2024 at 5:18 PM
    #4
    BS67

    BS67 8404 USMC Doc

    Joined:
    Jan 26, 2024
    Member:
    #38143
    Messages:
    6,820
    Gender:
    Male
    CC Ne
    Vehicle:
    2023 SR5 Premium
    Welcome
     
  5. Oct 9, 2024 at 3:36 AM
    #5
    Toy4X4

    Toy4X4 New Member

    Joined:
    Jul 18, 2020
    Member:
    #15580
    Messages:
    8,264
    Gender:
    Male
    First Name:
    Jeff
    Vehicle:
    2020 Offroad Prem. 4-runner
    RevTek 3" front- 2" rear leveling, JBA uca's, LED interior lights, Cooper 275-70-17 AT3 LT
    Welcome from Wisconsin!
     
  6. Oct 9, 2024 at 9:30 AM
    #6
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,834
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Welcome here officially, from British Columbia!
    Fantastic choice 4Runner year/trim if I say so myself.
     
  7. Oct 9, 2024 at 11:05 AM
    #7
    DesertSurfer

    DesertSurfer It ain’t bragging if you can do it!

    Joined:
    Jun 6, 2023
    Member:
    #33284
    Messages:
    1,673
    Gender:
    Male
    First Name:
    Gary
    San Diego
    Vehicle:
    2024 T4R ORP w/KDSS Underground
    Welcome to the forum!
     
  8. Oct 10, 2024 at 5:07 AM
    #8
    Dabigono

    Dabigono Just Joined

    Joined:
    Dec 24, 2018
    Member:
    #8196
    Messages:
    4,487
    Vehicle:
    2020 4Runner
    Welcome
     
  9. Oct 10, 2024 at 7:05 AM
    #9
    steelevo

    steelevo Not so new anymore...

    Joined:
    Nov 29, 2022
    Member:
    #29845
    Messages:
    2,674
    Utah
    Vehicle:
    2023 4Runner TRD Pro Solar Octane
    Welcome
     

Products Discussed in

To Top