2001 4runner stuck in 4wd

So i posted on here about 2 weeks ago about my 4runner being stuck in 4wd drive, i replaced the front ADD actuator and the transfer case actuator with new ones also replaced the 4wd drive indicator switch, still wont come out of 4wd , lights flashing and the VSC light is also on neither will respond to the switches . Now my question to you guys is has anyone ever had trouble with the ABS-TRAC-VSC Computer control module on one of these???? also changed gear oil in the front and rear diff and the transfer case , also tried all the trick s backing up going forward turning the wheels this way and that way nothing is working somebody please help before i burn it to the ground!!!!

 

Did you check the 4WD sensors?

 

if you are referring to the switches on the transfer case actuator they are both new

 

https://www.yotatech.com/forums/f2/4wd-wont-disengage-99-4runner-ltd-131201/index3.html

https://www.youtube.com/watch?v=PZZjZ74bUWA
https://www.youtube.com/watch?v=tI0TYK0qg4k
https://www.youtube.com/watch?v=sOVl2FvNnQ0

Seems like a known problem, although rare. Dunno, if any of that will help.

 

thanks for the info, but i think i might know what is wrong, due to some bad info when i installed the tcase actuator it is on wrong I got a video from yodatech that says that the shaft coming out of the tcase should be all the way in when putting the actuator on, i put it on with the shaft all the way out and also the gear inside is not in the right position . So today i am going to remove it and reinstall it by these directions and see if that fixes it