What have you done to your 5th Gen 4Runner today?

Does SSO offer forum discount? Gonna order a slim line bumper and high clearance attachment soon for my wife's 4runner.

 

Same here

 

Sorry. Forgot to add Amazon link...

$80 Diode Dynamics Tail as Turn® LED Module compatible with Toyota 4Runner 2014-2021, Module Only

https://www.amazon.com/Tail-Module-...de+dynamics&qid=1563325222&s=gateway&sr=8-31#

Was pretty straight forward. Plug module inline between the factory harness and the taillight... jump black wire to green wire of module harness with supplied tap.. then remove amber signal light and replace with good 7440 white led bulbs. I'll see if I have link to those as well..
Here's the link for leds...

$17 ANTLINE Extremely Bright 7443 7440 T20 7441 992 W21W 21-SMD 2835 Chipsets 1260 Lumens LED Bulb Replacement White for Car Backup Reverse Brake Tail Turn Signal Lights Bulbs DRL (Pack of 4)

https://www.amazon.com/gp/aw/d/B07P5NDWR3/ref=sspa_mw_detail_4?ie=UTF8&psc=1#

$24 SEALIGHT 921 LED Bulbs, 912 921 LED Reverse Light Bulb, 912 921 LED Backup Light Bulbs 6000K 2600Lumens Super Bright, T15 906 904 902 W16W for Back Up Lights Reverse Lights, Pack of 2

https://www.amazon.com/SEALIGHT-Bac...1563326236&s=gateway&sprefix=921+led&sr=8-18#
Maybe a total half hour install time...

 

Tried to install my ARB compressor this weekend, turned out to be a bad wire harness and pressure switch. Just my luck. Emailed ARB about warranty just waiting now.

 

Any idea why it says 2014-2017?
Are the connectors different?
Someone had that problem with the 3rd brake light.
Thanks for the follow up!
Much appreciated.

 

I cut it just short of the grooves on the insides. Thus, if you can see above the car, you can see the gray on the inside of the grooves of the rail. I don’t have crossbars at the moment.

 

yeah just goes over the outside of the lights, provides some protection against rocks and scratches (they also have it in clear) and changes the color of the light. I was going this route since the led's are white.

this is how it looked on the previous set of fogs:

 

Hey Dan I think Jennifer @Strandskov is talking about these fog bulbs which are amber. They change the color and work very well.

https://www.xenondepot.com/h16-h8-h11-philips-Ultinon-LED-12793UNIX2-2700K-p/12793unix2.htm

 

Okay I changed the entire housing out to the morimotos and you cannot change the LED in them, they are a sealed projector foglight so unfortunately if I want a color change this is the only option for me. If I retained the stock foglight housing I could have just put that in there, but it feels like these throw much better and have a sharper cutoff now. Ultimately yes the film does essentially the same as swapping for a colored bulb however I prefer the entire face being yellow even when its not on though.

 

I have the clear/white version of these and they're insanely bright. I put yellow laminX over them and they're great. And I can always go back to white if I want.

 

All of these goodies came in the mail today. Installing on Saturday.

 

You are the third person who I have heard had problems with their wire harness.

 

I need to do on-board air and I have also been seeing more and more issues with the ARB stuff. I am almost considering something like Power Tank now because of some compressor failures and quality control issues I've been seeing. I definitely still prefer an on-board compressor but a little doubt is creeping in.

 

Mine came in smashed, probably durring shipping. Got a replacement, through the vendor, now it works fine

 

China!!

 

Installed some new reverse lights
https://headlightrevolution.com/2014-2019-toyota-4runner-led-reverse-lights-level-2/
Also got the TRD CAI for the heck of it. I’m just waiting till it’s not 100 degrees to install it.

 

I emailed ARB with the issues and they responded the next day and said they are mailing out replacement parts. So I get mass produced things are bound to have issues, but at least they have great customer service.

 

After years of aftermarket usage & purchasing. I have heard nothing but great things about ARB. They aren't cheap. Nothing good is.
If they found a flaw & are progressively helping to fix it.
That is a true 5* company to me.
I wish I could fit their fridge/freezer in the T4R but the GSD dog would be pissed! Lol This is my area.
We don't have kids. Maybe I should rip our the 60% rear seat & make a storage bin & shelf for it. Then I could get divorced and never see it!
Maybe someday...

 

I'm very happy with the results!

Parts List:
Bilstein 6112 In the Front
Bilstein 5100 In the Rear
OME Rear Springs
SPC Adjustable Upper Control Arms
BFG KO2 Tires 285/70/17
Fuel "Shok" Wheels
Prinsu Rack (for anyone wondering)

 

Made brackets for and installed a Diode Dynamics 30" Stage Series bar and Baja Designs S2 Pro ditch lights on the roof rack. Also installed a front camera and switch by anytimebackupcamera.com

More details on my thread here.

 

I see you have the Devil Horns.
They go well with your white paint.

 

Nice addition!
Does the grille camera come factory?

 

Prepping for Alaska in a month...

Slumberjack Roadhouse tarp and home-brewed bike rack on Yakima basket...

 

You can always build your own CO2 solution. Half the price of the power tanks. Downside is you can run out. I'm starting with a 5# tank (already had from home brewing)

 

It's a great addition and helpful on the trails, See Brian@ Anytime Backup Camera https://www.anytimebackupcamera.com

 

are you the same Andres from TW aka maker of these awesome emblems?

 

Awesome, will do!

 

I am

 

Welcome over here man!

 

Looks good. Did you remove it or do it while on the truck?
edit ** never mind, I see where you answered this. Thanks.