Bolt on exhaust tips 2018 SR5 4runner

been looking on Amazon at some exhaust tips and fouind this one:
https://www.amazon.com/dp/B00GMNL36...colid=UPBXSYFHWGD5&psc=0&ref_=lv_ov_lig_dp_it

BUT, is says will fit a 3" pipe, but dimensions read 2.85" and other say you have to cut your pipe end.

don't really want to cut, but want something like this to change the tone and look of my exhaust.

any suggestions?

 

I'll try to find the one I got from AutoZone or Advanced for you. It was $30 and went right on.

 

Here you go.

https://www.autozone.com/exhaust/ex...-round-stainless-steel-exhaust-tip/925444_0_0

 

Doesn't look like it's available there any more. Plenty of other sites have it.

https://www.amazon.com/Spectre-Performance-22362-Exhaust-Pack/dp/B071JRFKLD

 

Spectre...
I am dying here. It is garbage!
Next weekend I have to fix a buddies Spectre intake that broke the support bracket on a Hyundai! It must be the torque! Lol
Please don't buy!!

 

The Tundra TRD pro has black TRD tips.
If anything; add spacers and make that work.
That would be perfect!

 

It's a tip. It's eye candy. It's not going to hurt anything because they don't do anything. It's held on by three bolts that tighten on like a light fixture. If anyone screwed something up putting it on then they have more issues than a cheap exhaust tip..... it's definitely not a get what you pay for accessory and in the four months I've had mine on not one person has come up to me and told me my exhaust tip is junk. I'd probably have a bigger laugh than you if they did....because it's just a useless exhaust tip.

 

Please reread...
I understand this is just an exhaust tip.
My point was within 6 months my friends intake rattled loose. The weld literally gave away. In a turbo Hyundai!
I am purely speaking to the quality of products they use. I can post pics later if you think I am being petty.
The quality just isn't there.
I will find a way to put the Tundra TRD Pro tip on my T4R.
I could do a lot of things. My OCD demands the TRD logo on the exhaust tip.
Both my diesel Mbrp exhausts came with logo tips & I like it! LMAO

 

This is what I have on mine. There is nothing wrong with it. It goes on like any other tip, it weighs the same as any other tip. It is made out of stainless steel. There is nothing to make it junk any more than any other tip.

I won't address the intake because I know nothing about them, but an exhaust tip is an exhaust tip, is an exhaust tip. There's no pressure, no torque, no nothing to cause it to fail other than possibly rust, paint peel, or corrosion.

 

Go to an exhaust shop and have them weld on a nice tip. It'll cost ya 50 or 60 bucks and wont look like you clamped on extra tip to your tip

 

OK, I think everyone is getting out of control. all I was looking for was something similar to the DC one I posted because that tip was suppose to give the exhaust a beefier sound, and be a simple bolt on. however, even though the ad says it fits 3" all Amazon responses said it wont. Please don't start a debate on this thread. just help a fellow 4Runner out and offer alternatives that meet the parameters im looking for.

MAHALO's

 

I don't think a tip is really going to do that for you. You'd probably have to replace the muffler.

 

I believe he's looking for a resonator tip. I've had them before and they do change exhaust sound a bit, but in my opinion not enough to buy one.

 

Anyone one of these examples would really set the 4runner off.

 

A couple weeks ago an inpatient douche in a 5.0 mustang decided to flip off an elderly man that was in the passing lane. He then started trying to slalom through all the lanes. A dude with a diesel tip decided to speed up and box him in the right lane, I saw what he was doing and I sped up just enough to keep him from getting back over. Diesel dude then proceeded to smoke the douche in the 5.0 out....the best part the douche had his window down. It was the funniest damn thing I've seen happen in ages.

 

First search results shows this: https://www.youtube.com/watch?v=lkiAzErMRsY
Attached it on a 2018 4runner. You are good to go sir. And I have a new item on my Amazon wish list!

 

I ended up getting this one. It barely fit and sticks out more than I'd like.

 

Doubt anyone will catch it, its on sale right now for $18 for prime days.

 

I was hoping for Prime deals on sound deadening....but nope.

 

yea so no matter what I tried I could not get the bolts to allow me to bolt it on. So I am returning it

 

You have to remove the bolts completely. Shimmy it on, then evenly put all the bolts in.

 

yep tried that like I said no matter what I tried , the little square nuts would not stay in place and the bolts didn't reach enough in to thread.

 

Let us know what you end up going with? Other than the fit, my biggest gripe with this one is the stupid logo.