(4) Hybrid Sliders

We currently have 4 sets of Hybrid Sliders in Stock.

$925.00

Shipping is additional.

 

Yes

 

Considering they have a full frame plate I really doubt that.

 

X2 agreed. My Pelfry sliders don't have a full frame plate on the driver side.

 

“DeMello Off-Road 4runner sliders are built with 2"x2" square tube for the base of the sliders with a 1.75in .120 round tube angled up for higher clearance. Our sliders come fully welded ready to bolt to your frame using factory holes. Four legs per side to ensure you have the most solid mounted sliders available.

These sliders are made to work with your KDSS system on your 2010-2014 4runners.

(note: Not all bolts or bolt holes will be used on every model.)

(note: DeMello Off-Road recommends welding a small 1in weld 10in apart on the bottom of the bolt on sliders for heavy use)

(note: On sr5 models and limited models you will have to trim the lower running board valance in order to fit the sliders or get the "Trail addtion" valances.)

Grey 4runner shown has trimmed lower valance.

Please note, that powder coating is an option and holds no warranty from defects and damages. It will not protect the bumper from scratches, rust, trail damage, street damage or other. We do our best to ship the product to you with out damage to the powder coating but it has no written or other warranty.”


According to that they work with KDSS (you must have to bend and tweak lines to get these under the KDSS plumbing. But they are NOT compatible with Limited without cutting, removing, or replacing the side skirts but I still don’t see them fitting with XREAS.

 

I bought a couple sets of these. One for the runner and taco. Super stout, can’t wait. I believe they should be getting packaged up and heading out soon.

Cha-Ching!!

 

1 SET LEFT

 

SOLD OUT