2019 TRD Pro roof rack dimensions

Awesome bro, thanks

 

thanks @Ant Knee
hey i went to dealer last night i spook to parts this is the part # 6323042010 that is what they gave me but bad news $16.00 each
when i check the part # on line all it says bolt for installation of roof rails to the roof but does not give measurement or does not say for 19 Trd Pro rack

 

the best price i could find is $5.80. but since we now have the length and pitch.. we can use other bolts. i prefer a hex head anyways.

big thanks to Ant Knee and edgesalon for making this happen

 

please post what you buy i am looking as well where did you find it for $5.80

 

Click the link

 

that's the bolt for regular rails not the TRD PRO and no metric measurements

 

I got a price on the Pro Rack from my buddy who is a parts manager at a local Toyota Dealership. All he needed was a vin of a TRD Pro which was easy enough to find on Auto Trader

Rough price was $600 plus tax.

 

I think something like this would work if you could find somewhere to buy the bolts individually. Only real difference I see is the head isn't quite as wide as the factory bolt - but it doesn't need to be and the head on this bolt should be plenty wide enough to work.

https://www.accu.co.uk/en/torx-flanged-button-screws/485305-SHBF-M6-45-A4-BL

 

Seems like that would be an amazing price from a dealer. Unless he's giving you a buddy special on it.

 

i believe normal price is $577

 

Just 10% percent

I live in the peoples Republic of New York so tax doesn’t help

 

good news I just came from the dealer and looked up the FJ screws for the roof rack thinking should be the same , they have a install kit it has everything the Screws and both washers too

part # PT278-35070 and only $24.25 @ dealer has to be ordered
thanks to every one for your help.
https://www.toyotapartsdeal.com/oem/toyota~hardware~kit~fj~pt278-35070-hw.html

 

awesome when i searched for that part number, looks like it was superceded with PT278-35130HW for $12.86 Can you post pictures when you receive them

Other Names: Fj Rear Hardware Kit
Replaces: PT278-35070-HW
Description: Roof Racks- Hardware Kit.
Fits:

• Toyota:
  • FJ Cruiser

Here are some pictures from

$26 Genuine Toyota Accessories PT278-35070-HW Roof Rack Hardware Kit

Amazon

 

also one more thing i would like to add. if you look at ferdinand's FS roof rack, there are these brackets next to the bolts.

Bracket - Toyota (63185-0R010)



i believe these are used perhaps instead/with the washers? any case here are the part numbers. i'll order these too

 

New to the Group.. i just picked up a Pro Rack.. The Dealer installed a Frontrunner rack before it left the Dealer from the guy i bought it off of..They misplaced or He doesn't know where the Hardware is the rack is assembled.. i took my Factory Rack off and wondering what i should look for as far as Bolts to mount to roof.. and I'm guessing those tabs i see in upper comments .. Any Help would Appreciated.. The Dealer Obviously doesn't want to help me .. Because they say they can't find any Hardware or Etc.. i was thinking of using the Factory Bolts from my Stock one.. But now i see those tabs.. and wonder what or where they are..

 

Only thing I'm missing is these..

 

Did you read the comments above?

 

I wish i knew where those tabs where Designed to go.. they look like they would be underneath the roof for support when tightening down..As a Dealer Technician for Peterbilt and Kenworth for 20 years.. something doesn't look Right.. i can't see them putting them on top of paint.. Obviously I'm missing something..

 

Or I'm just an Idiot... lol..i have my Moments

 

i think those brackets either attach under the rack and over the roof. i think they just help align the bolts.

 

Well looks like they are centering locking tabs..after seeing this pop up while searching.. they use to lock in place

 

Yes.. You are correct Daytonaviolet .. well.. i guess I'll be ordering the Above parts... Has anyone said anything about applying a little silicone or RTV around area of holes.. the Rack looked like it might have had something on it..

 

My hardware arrived ,looks good has new seals and washers I would not use any other screws the head of these are pretty wide so it fits perfectly in the rack so no water can get in
now to make time for install good luck @Daytonaviolet
@GrizzlyTroy that hardware is for roof rack delete those bolts will not help you to install you need the longer bolts but the brackets are the same.

 

Awesomeness.. do you plan to run the brackets too?

 

My Dealer had Brackets.. they were like 2.67 and the FJ hardware Kit he was gonna order for tomorrow out of Jacksonville like 15 and some change.. I'm gonna pick there Brains to see if they have any bulkhead grommets to seal off open holes to keep water out. Or try parts store to see if they have some that i can make fit..

 

the FJ hardware kit has every thing you need, yes use the brackets for install

 

Here are the differences in the bolts small black is delete rack bolt only long silver is what is in regular roof rack the long black is Trd Pro rack screw

 

Well.. put those Brackets on ..and then put those stick on cushions on top of Brackets.. Didn't matter which way i put Brackets it didn't lock anything in place.. but i believe Brackets are to support the Rack better.. Then those paper gaskets under head of bolt.. there was still some of that material on the racks when i bought them.. We shall see.. I'm still gonna search for a sealing grommet to put over hole..

 

Found it and it's on
only 78 inches from ground to the top of the rack
Thanks to everyone that me out much appreciated People

 

EdgeSalon .. Look's like you have room to spare to level and possibly lift a couple inches to get in Garage..