OEM part numbers needed...please!

Hey guys,

I need some Toyota part numbers and I can't find em anywhere. I need the lower grill for a TRD pro (looking for black piece to replace the silver on my trd or)

Need the black emblem overlays for my 19 trd or

need confirmation that a 270/75R17 is the biggest tire I can get under my trd or without mod


Sorry again for the newbie questions...but I've looked everywhere.

 

See responses in Bold...click to expand

 

Someone not being an asshole to someone asking a question is quite refreshing... yes, I'm here from a different forum! Thanks Mike

 

You are welcome, an yeah that different forum is the reason I am here also. This place doesn't have as much content but I don't care because the people here are helpful an without all the anger that seems to infest that other place.

 

Thanks for the help! What do you suggest for paint on the lower valance? Im wondering if plasti dip may be the most durable...thinking about rocks and such. Also the company you linked to doesn't seem to make 4runner blackout kits...am i missing it?

 

Plasti dip will not hold up to impacts. It also should be replaced bi-yearly tops. I would use bed liner of some sort.

 

Try this one...

$76 2015-2018 SOUTHEAST TOYOTA 4RUNNER BLACK OVERLAY BUNDLE KIT 00016-89016

https://www.amazon.com/2015-SOUTHEA...mblem+overlay&qid=1552399868&s=gateway&sr=8-1

The only problem is you will have to order the TRD off road separately- I recommend debadging that part since it looks cleaner IMO.

An as @HoBoDanny suggested, some type of bed liner would be a good choice for that front part. Line-X?

 

Nox-Lux I think has dropped the badge overlays. I put those on a week after we got our runner. They all look good still with the exception of the "OFF" on one side. It faded and is a chalky grey within 2 months. All the other covers are still looking good. Nox-Lux said they were not producing them anymore and has offered no help to replacing etc. the bad one. I'm going to pull all the badges, remove the covers and paint them with a true semi-gloss black hot rod paint (Same stuff I use on complete hot rods). I also ran the black TRD Pro Valance, I got mine from a dealer that sells on Ebay. Honestly, doing it again, I would just paint the Silver ones and probably use the same automotive paint.

https://www.summitracing.com/parts/smm-hr010-lv/overview/

 

I agree with the bed liner. I did the TRD skid plate on the 4R and taco, both have held up well. Just need to paint the TRD stamp on 4R. I did red on the taco and it came out good. Going to do both valances at some point.