1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Removing plastic along rear door?

Discussion in 'Audio & Video' started by RidgeMan, Feb 21, 2019.

  1. Feb 21, 2019 at 8:33 AM
    #1
    RidgeMan

    RidgeMan [OP] New Member

    Joined:
    Jan 9, 2019
    Member:
    #8383
    Messages:
    20
    Gender:
    Male
    Vehicle:
    2014 4Runner SR5 (silver)
    Anyone know how to remove the plastic strip between the carpet and rear door seal? trying to run a antenna wire under it but didn't want to break anything.

    Thanks!

    strip.jpg
     
  2. Feb 21, 2019 at 9:10 AM
    #2
    DGP1961

    DGP1961 New Member

    Joined:
    Sep 17, 2018
    Member:
    #7154
    Messages:
    982
    Gender:
    Male
    Vehicle:
    2018 SR5 Premium
    Never done it personally but most of the plastic you basically work your fingers underneath and pry it off. Sometimes there's a tool but hands usually work. Some of that stuff has tabs that break off then doesn't snap back good and tight...Try to google it also.
     
    7385 and RidgeMan[OP] like this.
  3. Feb 27, 2019 at 6:53 AM
    #3
    grayflare

    grayflare New Member

    Joined:
    Aug 2, 2018
    Member:
    #6586
    Messages:
    80
    Gender:
    Male
    Vehicle:
    2018 4runner TRD PRO
    Just put your fingers under it for support and pull straight up. Snaps back in when through. Popped all mine off while running speaker wire for my audio upgrade.
     
    7385 likes this.
  4. Feb 27, 2019 at 7:01 AM
    #4
    Linuxr

    Linuxr New Member

    Joined:
    Nov 2, 2018
    Member:
    #7650
    Messages:
    74
    VA
    7385 likes this.
  5. Feb 27, 2019 at 7:14 AM
    #5
    HoBoDanny

    HoBoDanny Dude...

    Joined:
    Feb 5, 2019
    Member:
    #8697
    Messages:
    966
    Gender:
    Male
    First Name:
    Daniel
    Kentucky
    Vehicle:
    2004 SR5 V6 4WD 4Runner
    RCI Skid Plate CBI Ditch Light Brackets Hankook DynaPro ATM RF10 265 70R17 113T Tires 1.25” Wheel Spacers TPMS Bypass Mod Hydrocarbon Filter Removed Merca decal 2” leveling kit front only Black headlights
    Just beware of gold weather they are more prone to breaking when cold.
     
    7385 likes this.
  6. Feb 27, 2019 at 7:43 AM
    #6
    RidgeMan

    RidgeMan [OP] New Member

    Joined:
    Jan 9, 2019
    Member:
    #8383
    Messages:
    20
    Gender:
    Male
    Vehicle:
    2014 4Runner SR5 (silver)
    I bought a trim removal tool kit.. it works very well, there are 4 or 5 large fasteners that hold that piece down. I lifted it enough to see them but didn't pull it off, it would have taken quite a bit of force and I didn't want to risk breaking anything. Thanks!
     
  7. Feb 27, 2019 at 8:13 AM
    #7
    Linuxr

    Linuxr New Member

    Joined:
    Nov 2, 2018
    Member:
    #7650
    Messages:
    74
    VA
    NP. After finding that kit I just noticed this one, its has more tools and pcs.

    https://www.amazon.com/HandsEase-Re...P18BFANDK4V&psc=1&refRID=FNKDYKA06P18BFANDK4V
     
    RidgeMan[QUOTED][OP] likes this.

Products Discussed in

To Top