Bull bar issues

I bought a bull bar. The description indicated it would not interfere with pre-collision-cruise control sensor, it does.
looking for a solution. I’m open to relocating the sensor, pulling a fuse or anything that will disable the dash warning lights and messages. As I said I don’t use the Cruise control and have been driving for 50 years W/O collision warning with no issues.

Thanks

 

The radar cruise control that you're referencing, comes from a camera mounted in the windshield. There are relocation kits for the front sensor. That's the sensor that monitors/controls the auto braking and pre-collision.

If you pulled the fuse or disconnected it, I bet it would make matters worse and you'd have even more warning lights on the dash. You don't want that.

https://yotaxpedition.com/products/...OcOtrlkqyM71xuL7YOtOd3xNhryqIegIaAiI5EALw_wcB


https://www.youtube.com/watch?v=leuQBCztWmQ

 

The drunk crazy guy, aka Borracho loco is right. You don't want to disconnect this thing. I have done it too and tons of errors later on. Do the bracket thing instead and be done.

 

Sorry to hear aboht this issue. Which bull bar is this? So people are aware and can avoid.

Got any pics?

 

First off, Welcome to the forum 1mulebarn!

Post up some pics, Would like to see how it blocks the sensor for future reference.

 

“The radar cruise control that you're referencing, comes from a camera mounted in the windshield.”

I’m confused, the cruise control became inoperative on the same day that I installed the bull bar, as did pre-collision system.

 

They look terrible don't do it

 

I'm sorry dude. I understand those bars are popular for some people. I do see them around.

You should remove it.

 

I may do just that but I’m going to explore the corrective alternatives first.

 

Agree

 

Take a look at the C4 TSS Relocation Kit

 

$169 seems a little bit expensive for it.

 

Just a suggestion to begin your search keyword:TSS relocation. You'll find at least a few other offerings or get a DIY idea.

 

I’ve found just one other option for $80. I hesitate because the description doesn’t have much information. I sent an email to the company for clarification.

 

I went with the Rough Country bumper/bull bar. The fit was a little "rough" as one side does stick out a little but it rarely triggers my sensor and when it does it's only for a couple seconds.

 

I'd recommend removing it or getting a proper steel bumper.
C4's low profile high bull bar does not interfere with the TSS sensor.

 

I believe the systems are conjoined in the sense that if PCS is deactivated from an error then radar CC doesn't work.