What have you done to your 5th Gen 4Runner today?

Funny how under sized the KO2 is. I noticed that when I ran them under my 5th gen. 285 with a 3" lift looked tiny, not enough tire vs lift. Every tire manufacturer is a little different and they have a +/- spectrum they have to fall into. BFG falls on the very low side of that spectrum but they do make a great tire.

 

Right? I'm glad I decided against 295's. I could have been in a world of hurt.

 

Hope you have good luck with that battery. Have heard their quality has gone down. Still better than stock or a "normal" batt.

 

Tires to me always seem bigger off the rim.

 

I had two red tops let me down in a row. One was the replacement of the first one. Back in 2005 I had one on my 2004 Cobra, and it was solid. There are definitely better options out there now.

 

A couple shots during a 500mi drive from point A to point B I took yesterday. I love these old buildings.

 

Simple mod... black overlays on the OFF ROAD, removed and painted the OEM TRD red.

 

Honestly I doubt it. You've seen mine on 1.5" lift and 295/70/17 Ridge Grapplers which run on the BIG side of the spectrum. No BMC, just the fender liner mod.

 

Bilstein 5160 put on. Already had 6112s up front, Durabumps. I think that finishes my suspension.

 

As you say though, that is at minimum a 10 year old red top. The last few years they have been problematic for some reason. The old ones were great.

 

You have UCA's though? Or no?

 

No I was on OEM uppers and still am actually. I got rid of the RG tires because I hated them and i'm currently running a 285 but I intend to go back up. Likely going with a 33x12.5 Mickey Thompson Baja ATZ P3

 

That looks really nice

 

Damn.. now I wish I had 295's..LOL. Oh well.. next time, and by then I will have UCA's in any case.

 

Yokahoma Geolander M/T's installed, and LFD OR rack installed. It's a great day!


Still waiting on the snow to come...3 inches my eye!

@LFD_Off_Road

 

Installed SPC adjustable UCA’s and Undercoated the 4Runner with CarWell T32 rust inhibitor......

 

Those are SPC arms for reference. ToyTec sells them but they do not make them.

 

At least they aren't Light Racing. Ha ha! I like SPC. you should be happy with them.

 

Replaced both front axles yesterday...whoopie...gotta do what I gotta do to keep her on the trails!

Front passenger side axle was bent...NO clue how the hell it happened. I can feel a difference now with the new axles. Next up, install my ditch lights! maybe tomorrow, if I can get the garage warm enough, lol.

 

SPC is Light Racing. Those are the arms that historically had all kinds of issues. They're on I think their 3rd redesign? Maybe they got it right this time lol

 

Didn't know that. That is wild, as I've never heard of any rampant SPC issues like what was going on under the Light Racing name. Learn a new thing everyday.

 

You are absolutely correct!

 

Let’s hope they are fixed!

 

Same company. Google SPC failure. You'll find everything from honda civic tie rod ends to our control arms. In all honesty, I would run stock before anything from SPC I just have zero faith in their products and it's way to much of an imperative part to take a chance. Personally I had my search narrowed down to JBA and Camburg. I shied away from JBA simply because I don't care for the way they mount their ball joint and I don't care for the spacer on the ball joint shaft. That spacer moves the stress point to an area normally not stressed. That area is normally seated into an arm. Just doesn't sit well with me. My personal arm of choice is the Camburg ball joint arm.

 

More pics of the lfd?

 

They sent the wrong faring. This one not as tall as the correct one. But they are sending the correct one. This is all the pics I have right now.

 

That fairing actually looks good. I kinda like the short look. Might it be less noisy than a taller one?

 

You'd likely have a rubbing issue if you went off road under articulation.

 

That's what I was told. Probably just more road noise. I agree, I wasn't turned off by it at all.

 

They are fine. There are a TON of folks who runs these without issue for thousands of miles, myself included.
I do wheel my 4Runner too and not a single issue so far. Also, they are whisper quiet, have a ton of adjustability to get your alignment well within factory spec and maintenance is a few shots of grease every 5K miles.