Goose Gear Platform/Base Plate and Rear Window Molle w/shelves

SOLD —— SOLD —— SOLD

Both items sold on March 5th.

thanks to all who expressed interest.


SOLD —— SOLD.

A. GOOSE GEAR base plate and drawer platform for sale (5th Gen 4Runner):

TURNS 4RUNNER INTO A MULTIFUNCTIONAL VERSATILE VEHICLE.
and, EVEN BETTER WHEN USING THE MOLLE WINDOW PANELS WITH TWO SHELVES (See Molle setup below as a separate sale)

• Goose Gear Drawers (2) (L40% and R60%) in Sleeping Platform
• Base Plate (100%)
• See picture(s)

Platform, drawers and base plate sold together. Not sold separately.

TURNS 4RUNNER INTO A VERY VERSATILE MULTIFUNCTIONAL
DESCRIPTION:
Suggest viewing Goose Gear web page.
Side x Side Drawer Module is designed specifically for the 5th Gen Toyota 4Runner.
Note—>does not fit Toyota 4Runners that has 3rd Row Seat (Deleted).
Note—>platform requires base Plate

Coated for increased durability.
Drawers of are not coated. Finished top quality wood.
Platform (L 40% and R 60% drawers underneath) creates a flat surface that runs from side to side—front to rear.
Makes sleeping platform on passenger side (60%)
Platform passenger side: rear of front passenger seat back to back door.
Driver side: Rear of rear (driver side) passenger seat back to back door.
350# rated drawer guides with 34" of travel

There are various install videos on line.
Optional items (I.e. roll out fridge tray, extension for driver side platform, etc) available from Goose Gear

The drawers are made from a CNC cut, high-quality wood board with an aluminum frame and heavy-duty slides.
Very sturdy and no drawers sagging when fully loaded and extended.
The top is coated in a thick layer of truck bed liner by Goose Gear

Price: $970.00 (original cost $2700 +)



B. 4Runner Lifestyle Rear Window Molle Panels (x2) For 5th Gen 4Runner with upper (1) and lower (1) shelves.

DRIVER AND PASSENGER MOLLE REAR WINDOW PANELS x2
SHELVES x 2

Shelves great for Toyota 5th Gen 4Runner organizing (with 4Runner Lifestyle Rear Window Molle Panels)
Until I figure out moving pics from library to here, you can see this set up on line: 4runner lifestyle
Made with 100% steel and finished with a matte black powder coat, these panels are built to last. These have been professionally engineered to be low profile and follow the exact contour of your Toyota 4Runner 5th Gen

• Comes in a set two (2) molle panels - rear driver & passenger side
• Easy Installation: no drilling, or cutting
• Comes with all hardware needed
• Black powder coat finish
• Window panels and shelves sold together as one sale.
• Viewing also on web page
• Price: $200 (original cost $400+)

GENERAL INFORMATION FOR ALL ITEMS:

• -NO damages, scratches, etc.
• -Items in excellent condition
• -Sorry, no shipping and no delivery.
• -Cash only.
• -Buyer picks up items (central Ohio)
• -NO pets, fishing/hunting gear or tools ever put into drawers. ONLY clean clothes and jackets.
• MORE pics in other replies by self. Scroll down please
• Fair pricing. Please see web pages from Goose Gear and 4Runner page. Their prices are —you know, through the roof!!
• Will refer you to install videos for both.
• This is two separate sales. Item A is Goose Gear’s; and,
• Item B is the Molle set.

TURNS 4RUNNER INTO A MULTIFUNCTIONAL VERSATILE VEHICLE.
and, EVEN BETTER WHEN USING THE MOLLE WINDOW PANELS WITH TWO SHELVES (see Molle panels and shelves above) (separate sale)

 

My apologies for pic delay.
Few now posted.
Scroll posts
More to come

 

Bruh pics?

 

In pic: Alpicool fridge sitting in rear with one shelf installed.
Only the upper shelf was installed when pic was taken.

I am selling this with two (2) shelves.

Shelves are easily bolted onto side panels.

The fridge would open up with two shelves installed.

 

This may help ….

The platform, which contains the two drawers, is a rectangular box shape, is square shape. Both drawers in the platform box are equal lengths.

think of a large shaped box with an extension added on the passenger side. Thus the reverse “L” shape.

The extension board on passenger side makes it long enough to use that side for sleeping.
I used a long thermarest mattress and had ample length on the box+extension to sleep totally stretched out.

The driver side of the box , with no extension board, would be too short to sleep on.
Then for the right side , passenger side, there is an extension board. Which has a drop down piece. The drop down piece goes down to the floor. This extension board almost touches the back of the passenger front seat. But front passenger seat has ample movement front and backwards.

The rear passenger seat was “folded” down. Was enough room under the extension board for more storage.
The driver rear side is only the “box.”
Has no extension board. I left the rear driver’s side seat as is. Made for a nice sitting area. And thus no limiting the driver’s seat to go backwards and make flat.

This is a very versatile set up. Many buy other add on from goose gear or other sources.
Such as cooler roll out tray, kitchen tool out tray, bike stand, other add on cabinets, etc.

the Goose Gear set up made using my 4Runner so much better.

I’m selling the window Molle + two shelves as a separate sale.
It is rock solid. Make for a great expansion of storage space.

i will post two links.
One for installing the GG base plate. Then box is secured on top of the base plate. Must have and use the base plate.

the other link is instructions for installing the moles window+shelves.
I’m not the most mechanically inclined person. I did it.

 

This link for installing Goose Gear Plate:

https://www.4runners.com/threads/go...-plate-and-rear-window-molle-w-shelves.43501/

the plate is secured into 5Runner.
Then platform (with the two included drawers) is installed.

assembly of the platform with the two drawers is easy.
No drilling. No wood screws.
Bolts install into each factory predrilled holes.

 

Pic

view of the extension piece. With supporting piece.


to give more underneath storage and level storage surface I removed the bottom seat portion of the passenger side rear seat. Easily done with removing two retaining bolts.

the strap is from Eagle Gear. Using the two bolts that held rear lower seat portion in.

 

Pic
Shows platform box with two drawers.
And rear driver’s seat up. Can see passenger side of extension piece. Which goes to back of front passenger seat. I had seat way back. So it could’ve gone forward more.
Has boat type hatch to , if needed, reach items underneath.
This hatch is great if both sides had extension pieces. You were inside (ie rainy day, bad area, etc) and needed something from under the extension pieces.

this picture was taken before I put side rear window Molle panels with shelves in.

 

Maybe I missed it. But, where are you located?

 

OC4x4, central Ohio.

 

SOLD —— SOLD —— SOLD

Both items sold on March 5th.

thanks to all who expressed interest.


SOLD —— SOLD.