1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

What have you done to your 5th Gen 4Runner today?

Discussion in '5th Gen 4Runners (2010-2024)' started by Bob, Jul 24, 2016.

  1. Jan 21, 2025 at 5:54 PM
    MWinkTRD

    MWinkTRD Basically Stock

    Joined:
    Sep 10, 2023
    Member:
    #35614
    Messages:
    114
    Gender:
    Male
    First Name:
    Max
    Southeast Alabama
    Vehicle:
    2023 MGM TRD ORP
    1” Cornfed Level & 265/70/17 Cooper RTs
    We’re right at 6” with some still falling. It’s been a beast in both 2wd/4wd today. Since it never snows here though the mayor has closed all the roads except for emergencies tomorrow.
     
    hossler1788[QUOTED] likes this.
  2. Jan 22, 2025 at 3:07 AM
    UG244RP

    UG244RP New Member

    Joined:
    Sep 5, 2024
    Member:
    #42633
    Messages:
    24
    Gender:
    Male
    First Name:
    andrew
    Vehicle:
    24 T4Pro
    lots
    Installed OE Panels switch panel. Super well done piece and looks great. Now need to buy a few more lights. Only 3 hooked up at this point.
    IMG_8360.jpg
     
  3. Jan 22, 2025 at 3:49 AM
    Charlievee

    Charlievee Not new member.

    Joined:
    Dec 20, 2018
    Member:
    #8149
    Messages:
    1,491
    Vehicle:
    2018 ORP
    Eibach stage 2, load lifter kit, Maggie w/ OTT tune... Other stuff.
    This came in today. Just need to figure out how I'm going to delete the logo and some decent weather to paint it up. Anither spring project.

    20250122_054252_resized.jpg
     
  4. Jan 22, 2025 at 7:15 AM
    94hokie

    94hokie New Member

    Joined:
    Mar 22, 2024
    Member:
    #39296
    Messages:
    246
    Gender:
    Male
    Vehicle:
    23 TRD ORP Lunar Rock
    No photo as it was a brief outing, but we finally got 2" of snow here in Raleigh so I was able to exercise 4H, 4L as well as the rear locker. Honestly with the AT3's on there I almost didn't even need 4H, but was good to work through the various systems.
     
    playdixie likes this.
  5. Jan 22, 2025 at 7:35 AM
    vthoky

    vthoky New Member

    Joined:
    Aug 6, 2024
    Member:
    #42053
    Messages:
    449
    Gender:
    Male
    Virginia
    Vehicle:
    2024 TRD ORP
    Trailer connector relocate, tint, work lights, Pro wheels.
    Wow, you guys got more snow than we did up here in the mountains. :D
     
  6. Jan 22, 2025 at 8:53 AM
    replica9000

    replica9000 New Member

    Joined:
    Sep 7, 2019
    Member:
    #11179
    Messages:
    591
    First Name:
    Jason
    New Vertiform City
    Vehicle:
    2019 TRD OR Premium
    Dobinsons 2.5" lift. Cooper AT3 XLT 295/70R17.
    I've been in Texas the last couple weeks. They got an inch of snow where I am and everything was down yesterday and at least the first half of today too
     
  7. Jan 22, 2025 at 11:30 AM
    Thacrow

    Thacrow New Member

    Joined:
    May 30, 2021
    Member:
    #21719
    Messages:
    1,605
    Gender:
    Male
    NorCal
    Vehicle:
    2021 ORP
    Speed holes
    thats hot
     
  8. Jan 22, 2025 at 11:42 AM
    Lc200

    Lc200 New Member

    Joined:
    Jun 16, 2023
    Member:
    #33430
    Messages:
    1,003
    Gender:
    Male
    Vehicle:
    Pre Facelift SR5P
    Yes! We don't do snow here in Texas. You show us a cloud and we start buying wood and toilet paper.
     
    replica9000[QUOTED] and BS67 like this.
  9. Jan 22, 2025 at 12:21 PM
    BLKNBLU

    BLKNBLU New Member

    Joined:
    Jul 23, 2024
    Member:
    #41779
    Messages:
    550
    Gender:
    Male
    First Name:
    Mike
    Arizona
    Vehicle:
    2019 Nautical Blue OR
    Same in Phoenix. We don't even do rain very well. :confused:

    Some don't realize we have mountains in the state so some of us get a little snow action from time to time but have to go looking for it.
    Drivers seem to leave their common sense at home on rainy days.
    Hard freeze warning here the past day or two. LOL. That's more about the plants though.
    IMG_20250122_080608965.jpg
     
    Last edited: Jan 22, 2025
    Dabigono and captrussia253 like this.
  10. Jan 22, 2025 at 12:31 PM
    BLKNBLU

    BLKNBLU New Member

    Joined:
    Jul 23, 2024
    Member:
    #41779
    Messages:
    550
    Gender:
    Male
    First Name:
    Mike
    Arizona
    Vehicle:
    2019 Nautical Blue OR
    Thanks for the update. Sounds about what I'm looking for. If/when I lift I don't think I will go the 5100 route and for now I just want to wheel at stock height and get a better feel for the truck as is.
     
  11. Jan 22, 2025 at 12:40 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,988
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    beautiful day to engage the 4wd b4 snow.
    drove from home near Fraser River, up long straight road to Pitt Lake.
    forward & reverse: hi, lo, & locker.

    IMG_9951.png
    IMG_9972.jpg
    IMG_9962.jpg
    IMG_9964.jpg
    IMG_9968.jpg
    IMG_9979.jpg
     
  12. Jan 22, 2025 at 12:45 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,988
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
  13. Jan 22, 2025 at 1:30 PM
    Thacrow

    Thacrow New Member

    Joined:
    May 30, 2021
    Member:
    #21719
    Messages:
    1,605
    Gender:
    Male
    NorCal
    Vehicle:
    2021 ORP
    Speed holes
    is that California?!?!?!?!?! where's the Bay Area bro?!?!??!?! I don't exist?!?!?!?!?!

    Edit: it's BC isn't it?
     
    Last edited: Jan 22, 2025
  14. Jan 22, 2025 at 2:05 PM
    BLKNBLU

    BLKNBLU New Member

    Joined:
    Jul 23, 2024
    Member:
    #41779
    Messages:
    550
    Gender:
    Male
    First Name:
    Mike
    Arizona
    Vehicle:
    2019 Nautical Blue OR
    Quickly now, draw me a detailed likeness of British Columbia. :D
     
  15. Jan 22, 2025 at 2:07 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,988
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    :rofl:

    *edit: too short “short dogg” from the Bay Area, no!? I got love for the bay
     
    Last edited: Jan 22, 2025
  16. Jan 22, 2025 at 2:44 PM
    LarryDangerfield

    LarryDangerfield Moderator Staff Member

    Joined:
    Nov 30, 2024
    Member:
    #44259
    Messages:
    68
    Gender:
    Male
    First Name:
    Tyler
    Vehicle:
    2020 Nightshade edition 4runner
    Picked up some headrest pillows recently for increased comfort and they match the seats damn near perfectly

    20250122_164355.jpg
     
    ColeRunner, icebear, Dabigono and 4 others like this.
  17. Jan 22, 2025 at 4:10 PM
    Squatting Pigeon

    Squatting Pigeon Remember, bird watching goes both ways. Staff Member

    Joined:
    Jan 27, 2021
    Member:
    #19399
    Messages:
    461
    Gender:
    Male
    First Name:
    Holden
    North Texas
    Vehicle:
    ‘24 4R TRD OR | ‘23 GR Corolla
     
    Bagman, icebear, Rocko9999 and 2 others like this.
  18. Jan 22, 2025 at 4:12 PM
    LarryDangerfield

    LarryDangerfield Moderator Staff Member

    Joined:
    Nov 30, 2024
    Member:
    #44259
    Messages:
    68
    Gender:
    Male
    First Name:
    Tyler
    Vehicle:
    2020 Nightshade edition 4runner
    I mean it is a Nightshade after all, kind of a big deal....




    :D
     
  19. Jan 22, 2025 at 4:13 PM
    Gman2530

    Gman2530 New Member

    Joined:
    Mar 23, 2023
    Member:
    #31923
    Messages:
    48
    Gender:
    Male
    First Name:
    Gary
    Vehicle:
    2018 SR5 4wd 4Runner
    4Runner Limited Bougie Edition.. it does look good !!!! upload_2025-1-22_16-12-54.png
     
    Last edited: Jan 22, 2025
  20. Jan 22, 2025 at 5:42 PM
    Squatting Pigeon

    Squatting Pigeon Remember, bird watching goes both ways. Staff Member

    Joined:
    Jan 27, 2021
    Member:
    #19399
    Messages:
    461
    Gender:
    Male
    First Name:
    Holden
    North Texas
    Vehicle:
    ‘24 4R TRD OR | ‘23 GR Corolla
    Okay Larry Burgundy
    :D
     
  21. Jan 22, 2025 at 5:48 PM
    wax poetic

    wax poetic Raking like a mofo

    Joined:
    Mar 28, 2023
    Member:
    #32027
    Messages:
    638
    Gender:
    Male
    Arizona
    Vehicle:
    21 Super White TRD OR
    OEM+ Trail Edition rims w/ Toyo AT3 in stock size / OEM Black Lug nuts OEM Heritage Grill OEM Black Valences (f + r) Westcott Sliders/Modular Roof Rack Roam 95L case DIY sleeping platform
    Thank you for thinking of me! I got laid off and have been wrestling with what to do with the 4Runner giving it was one of my biggest expenses and have made the painful choice to start parting it and getting rid of it. I had someone who wanted it as is and was going to pay my loan off but Toyota Financial says up to a month to get the title and he didn't want to wait. Can't say I blame him.
     
  22. Jan 22, 2025 at 6:02 PM
    semprenissart

    semprenissart Mèfi

    Joined:
    Dec 22, 2021
    Member:
    #24758
    Messages:
    998
    Arizona
    Vehicle:
    2022 4Runner TRD Pro (MGM)
    Westcott Sliders. Gobi no rise
    I just replied to your DM. Good luck with everything and I’m sure there will be better days ahead once the storm has passed
     
    wax poetic[QUOTED] likes this.
  23. Jan 22, 2025 at 8:16 PM
    glwood54

    glwood54 Stop making me buy stuff!

    Joined:
    Aug 19, 2019
    Member:
    #10964
    Messages:
    6,910
    Gender:
    Male
    First Name:
    Gary
    Albuquerque, NM
    Vehicle:
    2019 OR, KDSS, RSG sliders, Eibach shocks, 265/70 Falken Wildpeak AT4
    Sorry to hear that.
     
    wax poetic[QUOTED] likes this.
  24. Jan 23, 2025 at 5:52 AM
    BC Hunter

    BC Hunter New Member

    Joined:
    Jan 27, 2024
    Member:
    #38149
    Messages:
    72
    Gender:
    Male
    First Name:
    Paul and Jane
    Kootenays BC Canada
    Vehicle:
    2024 TRD Pro-Terra
    Stock so far…..
    Haida Gwaii has already left and joined Alaska.....beating Greenland.
     
  25. Jan 23, 2025 at 8:33 AM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,988
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields

    lol if Alberta joins US with the beautiful Montana, I’m moving east
     
  26. Jan 23, 2025 at 8:38 AM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,988
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    didn’t do any work on the 4R,
    the weather is so nice I just took a drive in the country.

    North Pitt Meadows
    IMG_9943.jpg
    IMG_9950.jpg
    IMG_9953.jpg
    IMG_9954.jpg
     
  27. Jan 23, 2025 at 8:58 PM
    4runnerfromdxb

    4runnerfromdxb New Member

    Joined:
    Oct 8, 2024
    Member:
    #43274
    Messages:
    35
    Gender:
    Male
    [​IMG]

    first drive... went sleep giggling like a little boy...
     
    Harringbr99, ljerr2, jptx and 21 others like this.
  28. Jan 24, 2025 at 12:10 AM
    Thacrow

    Thacrow New Member

    Joined:
    May 30, 2021
    Member:
    #21719
    Messages:
    1,605
    Gender:
    Male
    NorCal
    Vehicle:
    2021 ORP
    Speed holes
    That's awsome thank you for sharing! Does it use stock injectors?
     
  29. Jan 24, 2025 at 4:52 AM
    jwctaco

    jwctaco Retired

    Joined:
    Apr 19, 2024
    Member:
    #39916
    Messages:
    385
    Gender:
    Male
    First Name:
    Jim
    S.W. Michigan
    Vehicle:
    23’ T4R
    Installed some “D” rings on top of my drawer unit. Not as strong as the stock ones but they’re being used by the drawer unit IMG_0990.jpg

    IMG_0992.jpg
     
  30. Jan 24, 2025 at 5:38 AM
    Squatting Pigeon

    Squatting Pigeon Remember, bird watching goes both ways. Staff Member

    Joined:
    Jan 27, 2021
    Member:
    #19399
    Messages:
    461
    Gender:
    Male
    First Name:
    Holden
    North Texas
    Vehicle:
    ‘24 4R TRD OR | ‘23 GR Corolla
    :jellydance::jellydance::jellydance:
     

Products Discussed in

To Top