What have you done to your 5th Gen 4Runner today?

So you had eibach stage 1 and now stage 2? Do you notice a difference?

 

Just did the test drive to check ride height. It will be awhile before i put it through its paces.

 

120k mile oil change. 45°F today. Probably the last warm-ish and dry day I'll see for a while.

Don't know why I didn't think of this before. Using a floor jack to position the heavy-ass aluminum skid makes things much easier while threading in the bolts!

 

Installed a Matterhorn fairing on my Pro roof rack. I still have some center mounting work to be done but I have some ideas.

 

That’s a good deal. I paid around $28 a gallon a couple months ago.

 

I did threaded insert mod, makes hanging the skid plate so easy its fun.

 

@Charlievee can you expand on that? I’m getting too old to hold the skid plate up with my knees…

 

Yeah this pricing is interesting. I recently bought the pink stuff as well. I price checked at a local dealer online but they're about 8 miles away. $22/gal. I figured I'd check the dealer around the corner from me. They no longer sell online but had good prices when they did. $34/gal. Pass. Made the 16 mile round trip so probably burned a gallon of gas which around here is $3-ish. Irritating.

 

@dgrenier15 Are those OEM plugs installed in your frame? Or something you did? Can you share some information?

 

Use a floor jack . Makes it easy to mount or unmount the TRD skid .

 

New wiper blades today for the 4runner and my wife's RX330.

 

Also a late entry. Forgot to post that last weekend I installed a voltage booster from ARCLightLEDs. Seems to be working as advertised after 1 week with no issues. Currently on sale 20 bucks off at $49.99
https://www.arclightleds.com/collec...ooster-5th-gen-4runner-fj-cruiser-pg2tb-brs6a

 

According to my 2010 wiring diagram and FSM, the pushbutton switch has no timer function. It's just a momentary pushbutton switch that sends a brief 12V logic signal to the A/C "amplifier" ECU to turn on the deicer relay. The A/C ECU subsequently provides a ground to light up the LED on the pushbutton switch. An on/off switch replacing the momentary switch likely won't work. You'd have to wire in a separate switch to provide a ground for the deicer relay, schematically like this:

 

Went and played 9 holes today, bogey’s my middle name lol

 

I think it was "Saker", here or the other forum that came up with it. Essentially installing threaded rod in place of the bolts, skid plate slides right into place and held up with acorn nuts... ... I thank the man every time i pull the skidplate.

 

That's definitely a nice price you got. I just have trouble understanding the discrepancies in both price and shipping from one source to another.

 

Maybe a separate relay to momentarily send that 12v would work? The power source would have to be something that's hot as soon as (or shortly after) the vehicle starts.

 

Ha! Bogey is my middle name too.

 

Hahaha

 

What's the purpose and can you post a link? I can't find one for a Pro roof rack.

 

Are you sure it's your age and not the stress of having 4 daughters?

 

Mine use to be Mulligan! I'm not as great a golfer as ya'll are.

 

I drive by there twice a day (to and from work). Parts department is so rude and arrogant, I won’t go in there.

 

I live in Downers and Westmont dealership (closer to me) wasn’t doing a sale… but yes… agree!

 

shat a brick but successfully clearance chopped rear bumper

 

Timer relays with momentary outuput exist for things like industrial automation, but they are a bit larger than a simple relay or switch. Example: https://www.amazon.com/DROK-0-01s-9999min-Digital-Controller-Display/dp/B07VLXR7Z1/

 

I bought these off Etsy. They are 3D printed and they solved the issue!

 

let's see if this link works.

https://www.etsy.com/listing/1191610009/4runnerfj-cruisergx460gx470-splash?click_key=699e4cb09348aa855aa339d723e5afd3abb4ad93:1191610009&click_sum=e6d1a445&ga_order=most_relevant&ga_search_type=all&ga_view_type=gallery&ga_search_query=splash+shield+shims+4runner&ref=sr_gallery-1-1&organic_search_click=1&sts=1&content_source=5c5bba8ecbb93f8f334e6ece18733df833e91d3b%3A1191610009

I noticed a little rattle in the wheel well and couldn't figure it out. I was looking at some 3D printed plugs for the rear trunk and stumbled upon these.