Recommendation for footwell lights for MTM enabled models

I was looking to almost purchase the VLED footwell lights and then noticed the "Not compatible with MTM enabled models" and I of course have one.

Lots of cheap china made ones on Amazon--but does anyone have a really good recommendation that can act like a bright light when you open the door and when headlights are on a softer light or the cabin?

2024 TRD Pro

 

I have one from OldRed available for sale

I bought it when I got his clock conversion just in case n never installed

I’ve confirmed with him outta respect if id be able to sell it(he’s gotten screwed before)

I dunno if he has any of his harnesses available now, they sell out…legitimately

For what it’s worth…he’s a wizard

 

Im sorry who are you talking about....website/link?

 

Sorry dude, just realized your a newer member
Welcome by the way

umm hopefully someone else chimes in on this n can navigate it better for you

but @Old Red is the member/creator here

https://www.4runners.com/threads/footwell-lights-on-trd-pro.12915/

https://www.4runners.com/threads/accessory-meter-display-harness.18163/

those are some posts that show some of his stuff

essentially you’d have to just buy the factory OEM bulbs…think you can choose from white, blue, red, or yellow/amber(low light)
They’re like $8 I think

I have the entire write up PDF n his instructions are super simple

he’s also great at answering questions if you need help

I’d like to say, send him a private msg
Let him know your interested in the footwell light(which is sold out as far as I can tell)
N that your buying it from another member
Me
@scottiezilla

 

In reading it all, it seems fairly clear his setup won't work on the newer models with MTM enabled....I sped read it all but I didn't see anything countering that.

Again mine is 2024 TRD Pro.

VLED mentioned more or less the same problem he did - the setup on those models / features is different.

 

Awh, the 24
Might be right there

however he does make things for newer models
Keep an eye out

again hopefully someone with his stuff in a newer truck can chime in

but he is top notch

 

Seems I have been roped into a conversation here...

Just to be clear here (because I dislike abbreviations), we are talking about the multi-terrain/panoramic view monitor system, not multi-terrain select (MTM/PVMS not MTS).

@TakeYourLemons, I fail to see why the VLEDs setup is not compatible with your 2024, or any 22MY+ with the MTM/PVM camera system. Their own review section has a 24 Limited guy in it saying they worked fine (and the 22MY+ limiteds come standard with PVMS). The way they interface with the vehicle is nowhere near where any of the MTM/PVMS wiring is. If you are considering the VLEDs, I don't think you will have any issue.

For clarity sake, my stuff is a bit different, but it doesn't have any issues working with MTM/PVMS equipped vehicles either. It works from 2010-24MY irrespective of trim or equipment.

 

@Old Red
Sorry n thank you for clarifying all that

hope all is well

 

I read on another post where the plug is a little different with the mtm and the vled's wouldn't work, I am also interested. I have a 2023 Pro.

 

Can you please point to that post, I'm genuinely curious.

The VLEDs connect in the A-pillar, and depending on if it is a 2010-19 or a 2020-24 it uses a different connector. In regards to the 20-24MY, that connector and wiring has been static without changes the entire run. The only areas where I would be concerned about running into MTM circuitry is if you were connecting to the kick panel or tailgate regions, which VLEDs does not.

 

I hear there is no such thing as a stupid question but what is MTM? How do I know if I have it?