1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Anyone drinking tonight... or, today??

Discussion in 'Off-Topic Discussion' started by Thatbassguy, Nov 27, 2019.

  1. Oct 21, 2024 at 5:30 PM
    #1981
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,476
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    sleeves of blue buck ale are $4 till 6pm

    IMG_6839.jpg
    IMG_6841.jpg
     
    Dabigono and Thatbassguy[OP] like this.
  2. Oct 21, 2024 at 6:25 PM
    #1982
    Noodles

    Noodles New Member

    Joined:
    Apr 9, 2024
    Member:
    #39721
    Messages:
    391
    Have you heard about reverse osmosis systems? You install it and never buy bottled water again. For the fraction of the price you spend on bottles per year.
     
    Thatbassguy[OP] likes this.
  3. Oct 21, 2024 at 8:34 PM
    #1983
    Agent_Outside

    Agent_Outside A Guy A Girl and A Trail

    Joined:
    Dec 18, 2018
    Member:
    #8098
    Messages:
    2,030
    Colorado
    Vehicle:
    Built 2011 T4R Limited
    Today is National Mezcal Day so I’m sipping on an Isidro Rodriguez Montoya produced inaequidens pechuga. 11 year old cultivated agaves were slow roasted for 15 days in an earthen pit oven and macerated by hand with wooden mallets. Spring fermentation lasted 10 days in underground rock pits with spring water. Then it was twice distilled in a wooden Filipino still with a copper pot. Iguana, shrimp, dried fruit, honey, cinnamon, and chocolate were added to the second distillation - similar to how gin is made. Only 100 liters were produced and it was bottled at 49.8%.

    IMG_1777.jpg
     
    Dabigono, Thatbassguy[OP] and vthoky like this.
  4. Oct 21, 2024 at 9:01 PM
    #1984
    NeverTooLate71

    NeverTooLate71 New Member

    Joined:
    Jun 13, 2024
    Member:
    #41063
    Messages:
    363
    Gender:
    Male
    First Name:
    Bob
    Vehicle:
    2024 4Runner SR5
    "Iguana, Shrimp"? Is that something the makers tell the Gringos to make it sound more exotic? So how is the taste?
     
  5. Oct 21, 2024 at 9:46 PM
    #1985
    Agent_Outside

    Agent_Outside A Guy A Girl and A Trail

    Joined:
    Dec 18, 2018
    Member:
    #8098
    Messages:
    2,030
    Colorado
    Vehicle:
    Built 2011 T4R Limited
    Historically pechugas were produced in very small quantities for special occasions and they rarely left the villages in which they were made. They were for celebrating special occasions like weddings and births. The familys that do make them typically use a family recipie that has been handed down over the generations. It’s always very small batches and pechugas have never been mass produced.

    But gringos do have a way of trying to make other cultures history about themselves and thinking that anything they can’t get from a strip mall drive thu is exotic.
     
  6. Oct 21, 2024 at 10:04 PM
    #1986
    NeverTooLate71

    NeverTooLate71 New Member

    Joined:
    Jun 13, 2024
    Member:
    #41063
    Messages:
    363
    Gender:
    Male
    First Name:
    Bob
    Vehicle:
    2024 4Runner SR5
    I have an Hispanic buddy (which makes this a bit more embarrassing) that on a trip down the Baja he picked up some Tequila that whoever sold it convinced him it
    was of high quality and worth what they squeezed out of him $$$ Stuff tasted like it was cut with water...
     
  7. Oct 22, 2024 at 4:05 AM
    #1987
    Thatbassguy

    Thatbassguy [OP] New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,638
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    Weird. I know that everyone's tastes are different, so even high end spirits might not taste good to everyone. But, watered down taste definitely doesn't sound good.

    I wonder if it's some sort of tourist scam, like fake Cuban cigars.
     
  8. Oct 22, 2024 at 4:13 AM
    #1988
    rphillips66

    rphillips66 New Member

    Joined:
    Jan 12, 2021
    Member:
    #19065
    Messages:
    205
    Gender:
    Male
    First Name:
    Allen
    Charleston SC/ Gastonia NC
    Vehicle:
    2017 SR5 Premium
    I know many of you probably never had the opportunity to drink unregulated beer. Meaning one may be 2% and the next may be 8%. In my travels to the Philippines, we drank a metric ass ton of this stuff.

    IMG_5082.jpg
     
    Dabigono likes this.
  9. Oct 22, 2024 at 7:09 AM
    #1989
    Agent_Outside

    Agent_Outside A Guy A Girl and A Trail

    Joined:
    Dec 18, 2018
    Member:
    #8098
    Messages:
    2,030
    Colorado
    Vehicle:
    Built 2011 T4R Limited
    It absolutely was. Coastal areas are known for it. Plus the majority of well made tequila gets exported. Unless it’s a specialty bar, restaurant, or liquor store they aren’t likely to have tequila worth drinking.

    Also, almost all liquor is watered down. Vodka for example by law is a neutral spirit that must be distilled to 95% or 96% ABV (the rule varies slightly by region). It’s then diluted to the typical 40% ABV with water.

    Denomination of origin rules for Tequila set the upper limit of bottlings to 55% abv. It's common for it to come off the still around 60-65% and then it's diluted. It is also worth noting that 40% is the legal lower limit for “alcohol” in the U.S., anything lower is considered a liqueur and taxed at a significantly higher rate, but in Mexico most of the commercially available tequila is bottled at 38%, which is always watered down. Nobody distills to 38% it always comes from dilution.

    For our October event we held an educational blind tasting about the effect of different water sources on agave spirits.

    Let's start with a simplified summary of making agave distillates: harvest agaves, cook them, extract the sugar, formulate and ferment the juice, distill, dilute, and bottle. There are two areas where the water source plays a significant role, formulation/fermentation and dilution.

    -Formulation/fermentation - the extracted sugars are mixed with water, this formulation is what gets fermented. During fermentation yeast, a living organism, feeds on the sugars converting it to alcohol. The water source is hugely impactful because any compounds, minerals, or chemicals in the water will affect how comfortable the yeast is in its environment. Fermentation is so important because it's where all of the alcohol and flavors are created. The material used for the still will have an effect, but the actual distillation process only separates and removes. You distill to remove water and the undesirable flavors while concentrating alcohol and desirable flavors, but all of those things are present in the base spirit because of fermentation.

    -Dilution - if your spirit is double distilled and bottled at 80 proof it's diluted (generally speaking, there are rare exceptions). But, diluted or not, if it's 40% abv it's 60% water.

    The blind-tasting lineup we put together to explore this concept:

    Pour 1 - Terralta Blanco
    Pour 2 - Arte NOM Seleccion 1579
    Pour 3 - Maguey Malate Heladio Lopez Luis Espadin Tierra Blanca
    Pour 4 - Maguey Malate Heladio Lopez Luis Espadin Rio Chico

    1 & 2 are both tequilas made at the same place, by the same person, in the same way. Water is used for both formulation and dilution.

    1 uses deep well water
    2 uses deep well water and captured rain water

    3 and 4 are both mezcals made at the same place, by the same person, in the same way, with the same Oaxacan espadins.

    Water is used for formulation only, these are not diluted.

    3 uses Tierra Blanca mountain spring water
    4 uses Rio Chico river water

    IMG_1681.jpg IMG_1708.jpg
     
  10. Oct 22, 2024 at 10:02 AM
    #1990
    SlvrSlug

    SlvrSlug Slightly bent.

    Joined:
    Jun 3, 2018
    Member:
    #6172
    Messages:
    7,851
    Gender:
    Male
    First Name:
    John
    Ramona Ca.
    Vehicle:
    2017 4-Runner SR-5 P. Kings, Built Right uca’s, Durabumps, RSG sliders
    Very informative, thanks for posting this.
     
  11. Oct 25, 2024 at 5:44 PM
    #1991
    Thatbassguy

    Thatbassguy [OP] New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,638
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    Cheers, y'all!

    I'm having some of this Komos Añejo Cristalino while I'm making beef short ribs in the pressure cooker. I'll probably switch to Palomas, or something cheaper after one or two. :D

    I have liked most of the Cristalinos I've tried, so far. This particular one is probably my favorite.

    20241025_193926.jpg
     
    Dabigono, nimby and jdm-v35 like this.
  12. Oct 25, 2024 at 6:35 PM
    #1992
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,476
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
     
    SlvrSlug and Thatbassguy[OP] like this.
  13. Oct 25, 2024 at 6:36 PM
    #1993
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,476
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    finished off the jim beam cream

    IMG_7004.jpg
     
  14. Oct 28, 2024 at 3:39 PM
    #1994
    SlvrSlug

    SlvrSlug Slightly bent.

    Joined:
    Jun 3, 2018
    Member:
    #6172
    Messages:
    7,851
    Gender:
    Male
    First Name:
    John
    Ramona Ca.
    Vehicle:
    2017 4-Runner SR-5 P. Kings, Built Right uca’s, Durabumps, RSG sliders
    Picked up a new stash today, I have not tried any of these

    IMG_3447.jpg
     
    Dabigono, nimby and Thatbassguy[OP] like this.
  15. Oct 29, 2024 at 12:24 PM
    #1995
    nimby

    nimby in the drink

    Joined:
    Mar 27, 2017
    Member:
    #3777
    Messages:
    4,671
    First Name:
    Jake
    California
    Vehicle:
    2018 SR5P
    What do you think of the Cimarron? I thought it was a pretty damn good tequila for the price but I'm not a big tequila guy in the first place.
     
    Thatbassguy[OP] likes this.
  16. Oct 29, 2024 at 1:58 PM
    #1996
    SlvrSlug

    SlvrSlug Slightly bent.

    Joined:
    Jun 3, 2018
    Member:
    #6172
    Messages:
    7,851
    Gender:
    Male
    First Name:
    John
    Ramona Ca.
    Vehicle:
    2017 4-Runner SR-5 P. Kings, Built Right uca’s, Durabumps, RSG sliders
    I tried the Cimarron Reposado last night and i really liked it, and you can’t beat the price for a good Tequila. It will be one of my regulars now.
     
  17. Oct 31, 2024 at 12:38 PM
    #1997
    jdm-v35

    jdm-v35 New Member

    Joined:
    Feb 11, 2023
    Member:
    #31200
    Messages:
    136
    Gender:
    Male
    CO
    Vehicle:
    2018 4runner TRDORP, 2019 Audi RS5
    Magnuson Supercharger etc.
    I just found both those Ocho's at Costco and bought them both!! Will give them a try when I have a chance!
     
  18. Oct 31, 2024 at 12:52 PM
    #1998
    LCJ77

    LCJ77 New Member

    Joined:
    Jul 12, 2022
    Member:
    #27794
    Messages:
    1,034
    Gender:
    Male
    First Name:
    Kevin
    Gilbertsville,Pa.
    Vehicle:
    2023 TRD Pro Ice Cap
    Ceramic Tint, D/S grab Handle, waiting for Brite Box Anytime, may add Raptor lights
    During Bruins Canes game!:cheers:
     
    Thatbassguy[OP] likes this.
  19. Nov 3, 2024 at 12:53 PM
    #1999
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,476
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    after the wave pool, a Sunday pint of IPA at the family restaurant Red Robin.

    IMG_7183.jpg
     
  20. Nov 5, 2024 at 4:01 PM
    #2000
    vthoky

    vthoky New Member

    Joined:
    Aug 6, 2024
    Member:
    #42053
    Messages:
    231
    Gender:
    Male
    Virginia
    Vehicle:
    2024 TRD ORP
    Trailer connector relocate, tint, work lights, Pro wheels.
    Oh, yes. There WILL be some drinking tonight.
     
  21. Nov 5, 2024 at 4:12 PM
    #2001
    LCJ77

    LCJ77 New Member

    Joined:
    Jul 12, 2022
    Member:
    #27794
    Messages:
    1,034
    Gender:
    Male
    First Name:
    Kevin
    Gilbertsville,Pa.
    Vehicle:
    2023 TRD Pro Ice Cap
    Ceramic Tint, D/S grab Handle, waiting for Brite Box Anytime, may add Raptor lights
    Same here! Bruin @ Leafs. Let's go Bruins !!!
     
    Thatbassguy[OP] likes this.
  22. Nov 5, 2024 at 5:08 PM
    #2002
    SlvrSlug

    SlvrSlug Slightly bent.

    Joined:
    Jun 3, 2018
    Member:
    #6172
    Messages:
    7,851
    Gender:
    Male
    First Name:
    John
    Ramona Ca.
    Vehicle:
    2017 4-Runner SR-5 P. Kings, Built Right uca’s, Durabumps, RSG sliders
    The only problem with that is you waste 3 gallons of water for every gallon you get.
     
    Thatbassguy[OP] likes this.
  23. Nov 5, 2024 at 5:51 PM
    #2003
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,476
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Lose leafs lose!
     
    LCJ77[QUOTED] likes this.
  24. Nov 5, 2024 at 6:17 PM
    #2004
    Thatbassguy

    Thatbassguy [OP] New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,638
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    Cheers, y'all!

    Having a gin and tonic or 3 at bowling.

    :cheers:
     
    jdm-v35, nimby and LCJ77 like this.
  25. Nov 5, 2024 at 6:23 PM
    #2005
    vthoky

    vthoky New Member

    Joined:
    Aug 6, 2024
    Member:
    #42053
    Messages:
    231
    Gender:
    Male
    Virginia
    Vehicle:
    2024 TRD ORP
    Trailer connector relocate, tint, work lights, Pro wheels.
  26. Nov 6, 2024 at 3:36 PM
    #2006
    vthoky

    vthoky New Member

    Joined:
    Aug 6, 2024
    Member:
    #42053
    Messages:
    231
    Gender:
    Male
    Virginia
    Vehicle:
    2024 TRD ORP
    Trailer connector relocate, tint, work lights, Pro wheels.
    It's new bottle day:
    [​IMG]
     
    Thatbassguy[OP] and SlvrSlug like this.
  27. Nov 6, 2024 at 5:16 PM
    #2007
    rphillips66

    rphillips66 New Member

    Joined:
    Jan 12, 2021
    Member:
    #19065
    Messages:
    205
    Gender:
    Male
    First Name:
    Allen
    Charleston SC/ Gastonia NC
    Vehicle:
    2017 SR5 Premium
    I got lucky in Pigeon Forge TN and found 2. Marine Corps Birthday will be enjoyable, no crayons this year

    IMG_5156.jpg
     
    jdm-v35, Thatbassguy[OP] and SlvrSlug like this.
  28. Nov 6, 2024 at 5:18 PM
    #2008
    SlvrSlug

    SlvrSlug Slightly bent.

    Joined:
    Jun 3, 2018
    Member:
    #6172
    Messages:
    7,851
    Gender:
    Male
    First Name:
    John
    Ramona Ca.
    Vehicle:
    2017 4-Runner SR-5 P. Kings, Built Right uca’s, Durabumps, RSG sliders
    I am just finishing off the last.

    IMG_3452.jpg
     
    jdm-v35, nimby, vthoky and 1 other person like this.
  29. Nov 8, 2024 at 8:36 AM
    #2009
    MyWyfsRnnr

    MyWyfsRnnr Have you seen the mall?

    Joined:
    Feb 26, 2019
    Member:
    #8958
    Messages:
    1,017
    Gender:
    Male
    First Name:
    Chris
    Citrus Heights
    Vehicle:
    2018 4Runner TRD
    Prinsu, Blacked-out taillights, tinted fronts, BudBuilt Sliders, BudBuilt Skids, OME lift, 275/70/17 KO2's, LED interior, C4 Fab Diff Skid, Dvr Grab Handle, AnyTime Backup Camera, Badge Overlays, Wet Okole Covers
    Weather chilled out enough to make "get your day started right " Irish coffee on our day off before pheasant season!

    1731083712345687996274799416419.jpg
     
    nimby, vthoky, LCJ77 and 2 others like this.
  30. Nov 8, 2024 at 2:28 PM
    #2010
    vthoky

    vthoky New Member

    Joined:
    Aug 6, 2024
    Member:
    #42053
    Messages:
    231
    Gender:
    Male
    Virginia
    Vehicle:
    2024 TRD ORP
    Trailer connector relocate, tint, work lights, Pro wheels.
    Irish coffee? Good call!

    I have a goal for tomorrow morning now! :^)
     

Products Discussed in

To Top