5th Gen TRD Skid Plate Mounting Bolt and Washer Size?

Hey all, I just found that my skid plate is missing a bolt and washer for the back mounting hole (driver side) and was wondering what the bolt size and washer go there. (I couldn't find a solid answer for the specific bolt size, though I didn't find the Toyota mounting hardware number)

Hopefully, this will help others in the future, too.

 

Just bought some from Toyota. Paid about $12 for 4 of them shipped.

 

I don't think these are the TRD skid plate bolts; they're supposed to be 4 of them in aluminum with aluminum washer

.

 

You are correct. These are for the standard skid plate. Didn't look at the trim in your profile.

Edit. That being said, the bolts I referenced are M8 x 1.25 x 20mm.

I'm guessing the bolts in the TRD Pro skid plate are stainless vs aluminum and probably a bit longer than the 20mm of the stock bolt. You may want to try a M8 x 1.25 x 25mm in stainless. Should be able to get them from an auto parts store

 

TRD Front Skid Plate Hardware Kit : PT938-00140-AA . About 15 bucks plus shipping from Bam.