Tire Fitment

2020 SR5 Premium stock. Will this wheel package fit my rig without any rub? Or without having to do any modifications to the fenders/fender liner?

 

Search is your friend. Just type "tire fitment" into the search bar. There's like 150 threads.

 

Welcome to the forum David.

No.

 

Welcome to the forum!

The answer is.. maybe. Depending on your alignment, the outside edge of the tire might rub on the fender liner and/or the mud flap. Those are easy fixes that can be fixed with the fender liner mod, a heat gun, and possibly a little trimming. I highly doubt that would rub on the body mount or anything, though.

As mentioned above, try searching the forum for threads about tire fitment. There are plenty of threads, and some have charts that help explain everything.

 

I have 0mm offset wheels and stock size Toyo AT3's and they rub at full lock, in reverse. I think there are tires that would have fit no problem, no rubbing and others that would have rubbed worse. Tire design does play a factor, squared off tread more of an issue than rounded at the sides. Bigger shoulder lugs more of an issue than no shoulder lugs. And then there are slight differences in overall diameter even within the same size (those AT4W's look like P-rated so 31.7" diameter while the LT in the same tire, same "size" are 31.86" diameter.)

 

welcome

 

Thats the problem, 150+ threads but nothing that has my answer, figured I'd see if the community knew. I'll continue to do research

 

Try searching: https://www.customwheeloffset.com/wheel-offset-gallery
Search the gallery. You may get lucky and see something close that matches what you're looking for.

 

I'll check it out. I appreciate the help!