1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Got some new tires 285/75/17

Discussion in '5th Gen 4Runners (2010-2024)' started by Ctreg, Oct 8, 2024.

  1. Oct 8, 2024 at 5:40 PM
    #1
    Ctreg

    Ctreg [OP] New Member

    Joined:
    May 14, 2023
    Member:
    #32885
    Messages:
    251
    Had 285/70/17 El cheapo Chinese m/t on just to see fitment and if I liked bigger tires. They chunked a few lugs and split some but where still drivable. They also started bumpy ride and became super loud about 20k miles on them. So I decided to get sone nitto ridge grapplers 285 /75/17 love them. Check them out. 20241007_170603_HDR.jpg
     
  2. Oct 8, 2024 at 5:42 PM
    #2
    phantomlord

    phantomlord New Member

    Joined:
    Sep 9, 2024
    Member:
    #42705
    Messages:
    4
    Gender:
    Male
    Vehicle:
    2024 TRD Off-road Premium
    Looking bad ass.
     
  3. Oct 8, 2024 at 8:42 PM
    #3
    Pepper

    Pepper New Member

    Joined:
    Aug 9, 2024
    Member:
    #42098
    Messages:
    83
    Gender:
    Male
    First Name:
    Heath
    East Central Alabama
    Vehicle:
    2022 ORP Barcelona Red
    Very nice. Looks good
     
  4. Oct 8, 2024 at 9:15 PM
    #4
    Slopemaster

    Slopemaster Slope Survivalist

    Joined:
    Mar 20, 2021
    Member:
    #20442
    Messages:
    3,113
    Gender:
    Male
    Idaho
    Vehicle:
    2018 SR5
    265-70-17 Ridge Grapplers, TRD Pro rims, 3M precut bra, N-Fab nerf/steps
    I’ve been happy with my Nitto RG’s. Nice having a tire that you don’t have to sweat driving over sharp rocks.
     
  5. Oct 9, 2024 at 9:41 AM
    #5
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,661
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
  6. Oct 17, 2024 at 10:38 AM
    #6
    Fortuner

    Fortuner New Member

    Joined:
    Jan 12, 2021
    Member:
    #19082
    Messages:
    172
    CA
    Vehicle:
    2021 4Runner TRD Off Road Premium w/KDSS
    Are you running any wheel spacers?
     
  7. Oct 17, 2024 at 12:45 PM
    #7
    JET4

    JET4 Old Member

    Joined:
    Dec 20, 2018
    Member:
    #8147
    Messages:
    4,348
    Gender:
    Male
    Southeast, Va.
    I have the Nitto Ridge Grapplers on my 2018. Good tires.
     
  8. Oct 17, 2024 at 3:15 PM
    #8
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    5,601
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s
    I love how 4runners look on this tire size. Are you using spacers on the stock wheels, or just stock.
     
  9. Oct 17, 2024 at 3:26 PM
    #9
    jasonmcelroy

    jasonmcelroy Recovering perfectionist

    Joined:
    May 17, 2021
    Member:
    #21537
    Messages:
    237
    Gender:
    Male
    First Name:
    Jason
    San Jose, CA
    Vehicle:
    2021 Grey Trail
    Bilsteins, KO2, sound system, RedArc towing
    Any steering wheel shimmy?

    I want to 285/70-17 KO3s this year and have had a hell of a time with steering wheel shake. (another thread here).

    Having not run enough different sets of tires on this truck I can't determine how much of the issue is due to the tires versus the truck just having sensitive steering and front suspension.

    Thanks,
    Jason
     
  10. Oct 17, 2024 at 3:29 PM
    #10
    Fortuner

    Fortuner New Member

    Joined:
    Jan 12, 2021
    Member:
    #19082
    Messages:
    172
    CA
    Vehicle:
    2021 4Runner TRD Off Road Premium w/KDSS

    It's the tires & balancing. KO2's have been known to exhibit balancing issues. It's been discussed in multiple threads.

    I personally went through multiple sets of KO2's that wouldn't balance, to the point where I felt there was something wrong with the vehicle.

    Switched to Toyo's that balanced easy and haven't had an issue since.
     
  11. Oct 17, 2024 at 4:29 PM
    #11
    Fishbum

    Fishbum New Member

    Joined:
    Jun 13, 2021
    Member:
    #21933
    Messages:
    374
    Gender:
    Male
    What size lift? Wheel spacers? Pictures from front or rear please
     
  12. Oct 17, 2024 at 6:18 PM
    #12
    jasonmcelroy

    jasonmcelroy Recovering perfectionist

    Joined:
    May 17, 2021
    Member:
    #21537
    Messages:
    237
    Gender:
    Male
    First Name:
    Jason
    San Jose, CA
    Vehicle:
    2021 Grey Trail
    Bilsteins, KO2, sound system, RedArc towing
    I'm familiar . . . and I've posted in those threads ;-0

    Just collecting anecdata here.

    Seeing if anyone has found steering overly sensitive to balancing as compared to other vehicles.

    Thanks,
    Jason
     

Products Discussed in

To Top