1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

What have you done to your 5th Gen 4Runner today?

Discussion in '5th Gen 4Runners (2010-2024)' started by Bob, Jul 24, 2016.

  1. Jul 25, 2024 at 8:46 PM
    Tooly

    Tooly New Member

    Joined:
    Mar 1, 2021
    Member:
    #20051
    Messages:
    354
    Okanagan, BC Canada
    Vehicle:
    2024 4Runner OR Solar Octane
    Not so much something I did to my 4R but this arrived at my dealer today. Been waiting a few months for it.

    PXL_20240726_020735168.jpg
     
    Last edited: Jul 27, 2024
  2. Jul 26, 2024 at 7:17 AM
    CA4runner

    CA4runner New Member

    Joined:
    May 12, 2024
    Member:
    #40404
    Messages:
    66
    First Name:
    John
    Nor Cal
    Vehicle:
    2019SR5
    6112s, TRD F2 wheels
    Kicker tweeter upgrade...
     
  3. Jul 26, 2024 at 7:19 AM
    DenverMoto

    DenverMoto New Member

    Joined:
    Jun 16, 2024
    Member:
    #41096
    Messages:
    78
    Gender:
    Male
    Vehicle:
    2010 T4R Trail
    That is criminal

     
  4. Jul 26, 2024 at 7:25 AM
    ipnpulz

    ipnpulz New Member

    Joined:
    Oct 14, 2018
    Member:
    #7455
    Messages:
    801
    Gender:
    Male
    Vehicle:
    2023 TRDOR premium T4R
    Part #s ?
     
  5. Jul 26, 2024 at 7:26 AM
    ipnpulz

    ipnpulz New Member

    Joined:
    Oct 14, 2018
    Member:
    #7455
    Messages:
    801
    Gender:
    Male
    Vehicle:
    2023 TRDOR premium T4R
    It did go down each yr but the 1st was a huge chunk
     
  6. Jul 26, 2024 at 7:29 AM
    CA4runner

    CA4runner New Member

    Joined:
    May 12, 2024
    Member:
    #40404
    Messages:
    66
    First Name:
    John
    Nor Cal
    Vehicle:
    2019SR5
    6112s, TRD F2 wheels
    Last edited: Jul 27, 2024
    kolter45 and djwantke like this.
  7. Jul 26, 2024 at 7:30 AM
    DenverMoto

    DenverMoto New Member

    Joined:
    Jun 16, 2024
    Member:
    #41096
    Messages:
    78
    Gender:
    Male
    Vehicle:
    2010 T4R Trail
    In CO it seems once your vehicle is past the 5 year old mark, it gets substantially less expensive. My 2019 Lexus was surprisingly inexpensive to register a couple months ago, and again my 2010 T4R will be pocket change to put plates on. Anything new is just outrageously pricy, unfortunately.

     
  8. Jul 26, 2024 at 8:04 AM
    Tooly

    Tooly New Member

    Joined:
    Mar 1, 2021
    Member:
    #20051
    Messages:
    354
    Okanagan, BC Canada
    Vehicle:
    2024 4Runner OR Solar Octane
    Excuse my Canadian ignorance but when you guys talk about yearly registration, is that in addition to insurance?
     
  9. Jul 26, 2024 at 8:10 AM
    DenverMoto

    DenverMoto New Member

    Joined:
    Jun 16, 2024
    Member:
    #41096
    Messages:
    78
    Gender:
    Male
    Vehicle:
    2010 T4R Trail
    Oh yes, and it varies by state. Colorado is one of the more expensive ones (though not as bad as others, I'm learning). Registering and getting plates for a new or almost-new car here is really expensive, it gets less so with older vehicles. Some states let you pay ahead for 2 years, CO doesn't allow this.

     
  10. Jul 26, 2024 at 8:19 AM
    kojak

    kojak New Member

    Joined:
    Sep 19, 2023
    Member:
    #35749
    Messages:
    279
    Gender:
    Male
    Vehicle:
    21 SR5P 4x4
    PXL_20240726_010554856.jpg

    Finally got one of those armrest covers, still think they look a little cheap but damn this is a comfy upgrade. It has about an inch of padding and some pockets I don't need or want.

    PXL_20240726_150004035.jpg

    Also installed a Tanabe Revel Trail Hart Medallion, gonna run the side exit for a while then try the turndown.
     
  11. Jul 26, 2024 at 1:43 PM
    Brett Tech

    Brett Tech New Member

    Joined:
    Jul 17, 2022
    Member:
    #27842
    Messages:
    81
    Gender:
    Male
    First Name:
    Brett
    Vehicle:
    22' TRD PRO

    I also have the Tanabe. I replaced the TRD exhaust due to the drone. I went straight to the dump tip. No regrets!
     
    kojak[QUOTED] likes this.
  12. Jul 26, 2024 at 1:47 PM
    Acesandeights

    Acesandeights #34

    Joined:
    Apr 16, 2024
    Member:
    #39864
    Messages:
    994
    PNW
    Vehicle:
    2024 ORP
    265/70/17 BFG AT KO2, chapstick in the cup holder
    His/her/their rig looks so clean, uncluttered, compared to your rig. Maybe he/she/they are flexing on you?
     
    NEguy likes this.
  13. Jul 26, 2024 at 3:22 PM
    OC4X4

    OC4X4 New Member

    Joined:
    Apr 18, 2016
    Member:
    #1902
    Messages:
    73
    Gender:
    Male
    Souther California
    Taking it in Monday. Other guy's insurance taking care of it
     
  14. Jul 26, 2024 at 4:10 PM
    Tooly

    Tooly New Member

    Joined:
    Mar 1, 2021
    Member:
    #20051
    Messages:
    354
    Okanagan, BC Canada
    Vehicle:
    2024 4Runner OR Solar Octane
    Ah ok, gotcha.
     
  15. Jul 26, 2024 at 4:25 PM
    Yobruhitsme

    Yobruhitsme New Member

    Joined:
    Nov 17, 2023
    Member:
    #36773
    Messages:
    969
    Gender:
    Male
    Denver
    Vehicle:
    Ineos Grenadier
    lol that’s dedication for the black trim !!!!
     
  16. Jul 26, 2024 at 4:26 PM
    Yobruhitsme

    Yobruhitsme New Member

    Joined:
    Nov 17, 2023
    Member:
    #36773
    Messages:
    969
    Gender:
    Male
    Denver
    Vehicle:
    Ineos Grenadier
    So it looks like ford expedition now.
    upload_2024-7-26_17-26-54.jpg
     
  17. Jul 26, 2024 at 4:59 PM
    HP15LTD

    HP15LTD New Member

    Joined:
    Jul 13, 2024
    Member:
    #41598
    Messages:
    7
    Gender:
    Male
    Replaced the interior bulbs with LED’s in my 2015 Limited. There was a bulb for the glove box but after reading about what a hassle it was I decided I really didn’t need to mess with it. Also, who wants the lights on their license plate to be brighter so the plate is more easily seen! :D
     
    Pentangler and Nick B like this.
  18. Jul 26, 2024 at 7:41 PM
    RedRunner87

    RedRunner87 Mall Crawler LVL Expert

    Joined:
    Feb 18, 2016
    Member:
    #1586
    Messages:
    1,024
    Gender:
    Male
    First Name:
    Vince
    The Springs, CO
    Vehicle:
    16 4Runner SR5
    Made my final payment for Ruby!!!
     
  19. Jul 27, 2024 at 4:08 AM
    BS67

    BS67 New Member

    Joined:
    Jan 26, 2024
    Member:
    #38143
    Messages:
    5,572
    Gender:
    Male
    CC Ne
    Vehicle:
    2023 SR5 Premium
    Congrats!
     
  20. Jul 27, 2024 at 7:48 AM
    RedRunner87

    RedRunner87 Mall Crawler LVL Expert

    Joined:
    Feb 18, 2016
    Member:
    #1586
    Messages:
    1,024
    Gender:
    Male
    First Name:
    Vince
    The Springs, CO
    Vehicle:
    16 4Runner SR5
    Thanks! Took a minute but survived a divorce a multiple moves to get back on my feet! Now she is mine forever lol
     
  21. Jul 27, 2024 at 8:06 AM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,506
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Excellent joke :laugh:
    That’s funny you gotta admit Borracho
     
    Harringbr99 and semprenissart like this.
  22. Jul 27, 2024 at 8:08 AM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,506
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    I bet British Columbia - ICBC is still more expensive LOL
     
  23. Jul 27, 2024 at 8:24 AM
    Borracho Loco

    Borracho Loco My 4Runner identifies as a Prius!

    Joined:
    Sep 23, 2023
    Member:
    #35824
    Messages:
    2,557
    Gender:
    Male
    Dallas/Ft Worth
    Vehicle:
    2023 40th Anniversary Special Edition
    Oooh look, another mod.....

    images_797b7ebf204d44ea9ca62827ede59bc7cdf7b6d7.jpg
     
  24. Jul 27, 2024 at 9:49 AM
    ace96

    ace96 New Member

    Joined:
    Apr 4, 2022
    Member:
    #26430
    Messages:
    20
    Gender:
    Male
    Vehicle:
    2016 Super White 4Runner SR5 premium, 2023 Solar Octane 4Runner TRD Pro
    TRD Pro wheels, TRD pro valence and grill, black out lettering.
    Took a family photo.

    IMG_3261.jpg
     
  25. Jul 27, 2024 at 2:18 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,506
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
  26. Jul 27, 2024 at 3:17 PM
    kojak

    kojak New Member

    Joined:
    Sep 19, 2023
    Member:
    #35749
    Messages:
    279
    Gender:
    Male
    Vehicle:
    21 SR5P 4x4
    Trying the turndown now--kinda fun but I'll probably switch back to the side exit. I prefer exhausts that are quiet unless you're stepping on it.
     
  27. Jul 27, 2024 at 3:57 PM
    TrailSpecial22

    TrailSpecial22 New Member

    Joined:
    Aug 18, 2022
    Member:
    #28262
    Messages:
    1,697
    Gender:
    Male
    First Name:
    Adam
    PA
    Vehicle:
    2022 Trail Special Edition Lunar Rock
    2” lift Bilstein 6112 w/600 lb coils front, 1.5” lift Eibach T13 coils rear, Bilstein 5100 rear shocks, TRD skidplate, TRD stainless catback w/black TRD side exhaust, TRD shifter handle, Weathertech bug deflector, 20% tint front, LED door bulbs, 285/70/17 Falken WP AT3, Energy Suspension front bumpstops, SSO Slimline Bumper w/ Badland Shackles, Durobumps 4.25” rear
    IMG_3863.jpg
     
    BS67 and djwantke like this.
  28. Jul 27, 2024 at 4:28 PM
    LCJ77

    LCJ77 New Member

    Joined:
    Jul 12, 2022
    Member:
    #27794
    Messages:
    1,044
    Gender:
    Male
    First Name:
    Kevin
    Gilbertsville,Pa.
    Vehicle:
    2023 TRD Pro Ice Cap
    Ceramic Tint, D/S grab Handle, waiting for Brite Box Anytime, may add Raptor lights
    Have the same "Pistol Grip Hackzall" Just asked my stepson about giving it to him to cut up pallets to burn in their fire p it!! I bought it cause it looked cool But have no real use for it.!
     
    djwantke[QUOTED] likes this.
  29. Jul 27, 2024 at 4:35 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,506
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Right on, Milwaukee should rename it “Pallet Cutter”, it worked great!
     
    LCJ77[QUOTED] likes this.
  30. Jul 27, 2024 at 4:38 PM
    MNT_RNR

    MNT_RNR New Member

    Joined:
    Mar 16, 2020
    Member:
    #13552
    Messages:
    34
    Gender:
    Male
    Vehicle:
    2007 4Runner
    Made some Molle baskets to go with the rest of my setup. Testing out the two sizes and different mounting locations.
    IMG_2804.jpg DSC_1832.jpg IMG_2808.jpg
     

Products Discussed in

To Top