Need some advice and guidance

Hello all, I have a 2019 Limited, stock height and wheel/tire package for now. 245/60/20. Offset unknown?

soon to change. 2500 budget

I’m at a loss of what size I want to upgrade to. I want to raise the height of the vehicle by increasing slightly tire size if possible? Probably going the 17inch wheel size route, and bigger tire? Does that work?? I want to keep the look pretty OEM slightly aggressive

 

You can't really get additional height with tire size on these rigs. Stock size is as tall as you can go without rubbing.

I'd put stock 17" wheels on it with BFG AT/KO tires in the stock size.

 

285/70R17 is a VERY popular size. You’ll need a little trimming and front end lift tho. Most common offset wheels is -12. That pretty must will flush-up to the fenders. At -25 your about 1” past the fenders. Be forewarned that at -25 you truck stays hard to keep clean as any road debris gets flung all of the side of your runner.

 

Lifting doesn't clear tires.

 

I think TRD Offroad wheels with 265/70R17 tires would give a nice look and practicality on the Limited.

If you do a mild lift and push the inner fender liner forward you can clear 285/70R17 tires on TRD Offroad wheels.
This is mine with 285/70R17

 

That is a solid looking ride. I'll try the 285's on mine next time. What lift did you go with?

 

Previously I had Bilstien 5100. Something to keep in mind, these after market suspension are not comfy as XREAS, but not too bad.
This is what I did now -
https://youtu.be/Xrp-LYkTLf8?feature=shared