What have you done to your 5th Gen 4Runner today?

Love little features like that. Now if I could just find a tissue box that actually fits inside the lid of the center console, lol

 

A while back, I set this aside when someone reported that these fit. I haven't tried them myself. https://www.cleanitsupply.com/p-253...ial-tissue-2-ply-50-tissue-box-896166_bx.aspx

 

They *looooook* like they'd probably fit, hmmmm.

 

Mine have been going for 6+ years now. Same color as yours.

 

Hey meefzah, so nu rubbing with the Rubitreks on TRD rims? Hearing a lot of people say wild peaks rub at full lick

 

My stock size AT3's didn't rub on Pro rims, but once I swapped those for SCS Blaze 10's that were 8.5 wide with a -10 offset they definitely rubbed on my passenger front mudflap at full lock.

 

I built and attached this camper... And went straight to it's natural habitat, of course.

 

Part number 55406-35050;
https://www.toyotapartsdeal.com/oem...year=2015&submodel=&extra1=&extra2=&filter=()

Link to other thread on the subject. It should bolt right into place!

 

received these for the 4R from Bob

 

How do you get those?

 

Just got to main page at upper RH click on the link that shows them. Says free if you have 2 or more post!
https://www.4runners.com/threads/4runners-com-decals.739/#post-15117

 

You have to do something very special for Bob.

Something that you may never speak of again.

It may hurt a little, but you'll need to put on a brave face.





.....or you could just do what @LCJ77 did above.

 

Oh you Cali boyz!!

 

I've waited long enough... ORDERED

 

yep my 07 had that, loved it.

 

Built a cedar carhole for the 2018. Happy car happy life.

 

It's like a humidor for your 4Runner lol

 

You're like the Ron Burgandy of 4Runner owners.

 

Are those plug and play? They look great.

 

I bought drawers from that seller...
well made and fit better than the first set I ordered
comes with felt on the bottom so it slides into place and stays there

 

From scratch. With some parts recycled from a prior build.

Here’s the build thread I have going on at Overlandbound: https://www.overlandbound.com/forum...er-but-pulling-a-diy-expedition-camper.48350/

 

Cleaned the windows and floor mats. Heading to Murrieta Hot Springs tomorrow. First Road Trip, 60 miles!

 

I have seen these from the guy I bought his High Clearance Rocker End Caps. https://minwin3d.com/products/magnetic-cubby-drawers

They are magnetic, but pretty low profile. I think hes coming out with a non-handle version.

 

Thanks for the link .

 

Yes:
https://youtu.be/-zBgEmV7omY?si=6uTpuIYhfwtajdbB

 

Whoa! That's a LOT of cedar! Looks great though!

 

I'm about to take it into the tire shop for the third time and I'm pretty bummed out. The TPMS light keeps flashing. When I bought the T4R a month ago, no issue. After a few hundred miles, TPMS light started flashing for a solid minute and staying on during every drive. First visit to the shop, they replaced two TPMS sensors ( strange that two would fail at exactly the same time but whatever ). The light never went out, they assured me it would after a few cycles. Never did. Took it back yesterday and left it with them, they called less than an hour later saying they only needed to separate all 5 wheels and then reinstall and the light went out. It remained out... for probably 15 miles, and then flashed again. Multiple battery unplug cycles, I got up under the dash and unplugged / plugged back in the little gray TPMS box, and it's still doing it. I'm so annoyed. Has anyone else experienced anything like this before? I'm afraid they're gonna expect me to keep throwing money at sensors but I also don't know what else it could be

 

When were the batteries in the TPMS last replaced (the ones that haven't been swapped out)?

 

Normally all sensors wear out close to each other if they are the originals. So if you are replacing one because a light showed up, it makes sense to replace all 4 as long as the light is because of dead battery or low battery.
Ask the shop if all sensors are communicating with the tpms module. If not, replace the one that isn't. Or replace the other 2 old sensors for a complete new set.
If they still don't read, you could have a faulty module. Now that is an expensive part to replace. DT will replace and program a sensor for USD60 with about 7 year warranty