What have you done to your 5th Gen 4Runner today?

Smart man. Such a nice truck.
Come up with the money and rust proof that whole thing! I’d kill to have a ‘24

 

scuba!! left the e locker alone for now will come back to it some other time.

 

thanks, I found a different chinese brand for the splicers that would be delivered tomorrow, in time for weekend...

 

Finally installed my Rago panels and Rotopax stuff

 

Thanks

 

What did you use to attach the boards to the pro rack? Thanks

 

It’s a BajaRack MAXTRAX Mount with MAXTRAX pin set.

 

Thanks much!

 

First mods…remove hideous predator tube steps and replace halogen drl with amber LED’s. Slowly but surely…she’s comin together .

 

Post a link for those leds! I want

 

Same. I'm curious to see how this looks.

 

I think I copied the link correctly…so to be clear, these DO work in the 2021 LED projector head lamps in the DRL position. From what I’ve gathered, non-led, pre-2021 does not work since the drl is utilized as high-beams. Kinda tricky, there is a thread all about it somewhere here, 2021 Pro and Limited models came with LED headlamps and from what I’m gathering…2022 (all models) come standard with these LED headlamps. These specific bulbs supposedly can operate at the 6V power with minimal “flickering” used as DRL’s. I have not had any flickering in mine thus far. Hope this helps!

$18 Auxbeam 9005/9006/H10 LED Fog Light Bulbs, 3500K Amber Yellow, Max 50W 8000LM Extremely Bright Led Light Bulb, 360-degree Illumination, Canbus Ready, Pack of 2

https://www.amazon.com/dp/B085WVW9QJ

 

My 2020 is at 46k miles so decided to grease the drive shaft. Some of those zerks are a massive pain to get the grease gun on and it renewed my hate for the inability to actually have the coupler hook on. I got 5 of the 6, I'll try the one I couldn't get a good connection on when I change the oil next month.

 

I got the lock 'n lube and have been very pleased with it. A couple of times when greasing my rear drive shaft, I've had to move the vehicle a bit to get the drive shaft to spin such the zerks end up in a more accessible position.

 

I've seen it mentioned, just being stubborn about buying it bc I can't make the regular work

 

Chock the front wheels. Get the rears off the ground and put it in neutral. Spin drive shaft to desired position. My arms don't contort like they used to.

 

I bought the nylon 3/8" barb fitting from Tractor Supply for $2.75. I just wanted nylon over brass or plastic.
I got a foot of 3/8" hose cut from a reel from an auto parts store for $1.00.
Took about 15 minutes. It's easier if you turn your front wheels to the left to give you more room.

 

Nothing amazing, drove for the first time in weeks.

 

That f-ing shin buster though!

 

Clean it up or replace it (you'll need starting fliud and compressed air.) They get packed with crud and lose their clamping ability.

 

It's a brand new grease gun. I'll probably just have to get the lock n load for next time

 

1st vanity plate after driving 55 years. Got the idea from this thread.
** I have to learn how to post pictures.....
I guess I figured it out?

 

Damn man, with a license plate like that, you are PHO-real!

 

Did this this today.. Easy and cheap.. all 4 doors.. Its the little things that make it cool.. Of course can only see it at night!

 

Those look nice and I want a set, but they ONLY come in one style. I'm not going to advertise for 4Runner Lifestyle for free. I wish they'd make a "Toyota" or "4Runner" lettering style.

 

Might be 4Runner adjacent but stopped by Equipt Expedition Outfitters on my way through Salt Lake Wednesday and had a Eezi-Awn platform attached to my 4Runners pup trailer. Seriously considering the same platform for the 4Runner now.

 

Installed the Morimoto XB Gen 1 tail lights.

 

Just bought them for my 24 hope they work, hate the look of the OEM DRL. I end up turning them off. I wish they updated the lights like they did on the 21 Tacomas

 

They do on Etsy. I recommend https://www.etsy.com/shop/OperationModOut

 

how about these?

the seller has a few different styles,
https://www.etsy.com/shop/MVPCUSTOMSShop

the ones I got have glass lenses and appear to be well made
plan to install this weekend