What have you done to your 5th Gen 4Runner today?

This might be helpful:

https://www.youtube.com/watch?v=LAYGdcKSA3o&t=58s

 

Haha, yeah I forgot to mention that one is her daily driver.

 

Happy wife, happy life brother.

 

stock UCA, caster i think is at 3.6. i do light trails but no rock crawing.

 

Looks good. What percentages did you go with?

 

Stock UCA, 2” lift and positive caster? Haven’t seen anyone be able to achieve that with that setup. Three alignment shops and one of the best in Austin and they couldn’t get there. Curious and curiouser.

 

my alignment was done at the toyota dealership where i purchased it from in Chester County, Pa. I’ll try to dig up the sheet and post it.

 

3.4 DS & 3.6 PS side

 

Changed oil, air filter, and cabin air filter. Lubed propeller shafts. I was getting ready to rotate the tires when it started raining, so I'll do that in a couple days.

 

Changed oil, filter, lubed driveshafts, rotated tires......

 

Uh-oh, you're way ahead of me!

 

Only with the rotate tires! Wanted to stop and rotate tommorow but decided I was already dirty and sweaty so went ahead and do it! Always amazes me the torque on the aluminum wheels is 76ft/lbs

 

Bought it lol

 

I respectfully disagree about 285s rubbing. I have a 3” front and 2” rear lift with 285/70/17 on TRD Pro wheels with ZERO rub. The difference is that I replaced the UCAs. No bumper cut. No body mount chop. No rubbing.

 

Used the same ones, couldn't be any easier of sn install

 

I have the matt finish pro wheels and they came with chrome, ordered a set the day I bought the truck, almost a month and they called, went to get them and they were some Chinese knockoff. Parts man even confirmed and credited my card back.

 

Every truck is different

 

This guy is a never ending supply of knowledge

 

Stopped by Homeless Depot and snagged a piece of the gutter guard. It does take some work to flatten it out. I used my vise to help, then beat it on the floor. I used a towel on the floor and covered it to protect the finish. Probably spent 2-3 hours on it. Pretty happy overall. I moved the badge to the upper grill. Didn't want to have to drill out the new screen to get the bolts to pass thru. Cheap mod for less than 4 bucks...

I don't think I will try to add the mesh up top. It would be to much to do and try and leave the lights, which I like.

 

Looks good. I just picked up the mesh from HD yesterday. If I get time, I'm going to try and get it installed today.

 

This guy provides a lot of useful information. Thank you. Side note: I have his shift knobs. They are awesome. No rattle and feel great.

Interesting to hear everyone’s preference and experience. I actually prefer 255/80 on OEM TRD wheels over 285/275/265 (look and functionality).

 

Nice! I also have a 2013 Trail and have been bouncing between head unit ideas. Which Carplay screen, cup holder, and adapter did you use?

 

yes we know that. My set up is just an example of what i did to fit 285s which was not much.

 

agreed

 

TRD Pro running boards, mudguards, ORP wheels, Michelin Defender LTX M/S2 265/70/17, Sherpa Needle

 

One of the few Sherpa needle racks Ive seen in the wild. Mostly stock photos online. Looks nice, anymore pictures?

 

I had one more from a different angle.

 

Any wind noise?

 

I've only been on one highway drive (up to 80mph) and didn't notice any additional noise. My passenger didn't either. I'm more concerned that I didn't install it right and it's going to leak. It got a hand wash just before these pictures were taken and I didn't notice any water spots on the head liner(yet), so that's good news.

 

Ive heard good things about the Sherpa sealing system so hopefully you're good! I'm just concerned about wind noise. I'd be pretty bummed if I spend the money on a rack and have a whistle.