What have you done to your 5th Gen 4Runner today?

Custom Fabbed tube front bumper - 2” DOM with fill plate.
Washer Reservoir relocated.
Total weight around 50 lbs.

 

Dude, every time you post a picture of your truck, it keeps getting better looking. That mod is sick and that approach angle looks great. How long did it take you to fabricate/install that?

 

Thanks a ton for the compliments!
I wish I had the skills to do this work myself. Had a local shop do the work. It was $750 for the bumper and install. And it was in the shop for about a week. The fabricator had a supply issue with the plate steel otherwise it would have been much shorter.

 

These are great. I've had them for 2 years. I noticed a lot of people on this forum go for the Pro or Max, but these Sports are very bright. Recommend the yellow.

 

That's my dilemma... is the sport good enough or should I save for the pro

 

Puppy!

 

Great looking Runner! Normally not a fan of chrome but this is a great look. What did you use for the chrome part above the winch that holds the tail lights?

 

Quick interior and engine bay wipe down. It needs a good wash, covered in bugs from last weekend when it was 87*. It's 33* outside now ....hopefully wash it Sunday. High of 60.

 

Fuck, I need to get around to that, my bay looks horrible

 

I agree with 2016SR5P, DD SS3 Sport has worked great for me. That said, more light seems like it could always be better and I am sure it depends on the use case.

I drive on some dark back roads in NH and ME and these are a game changer as far as lighting up both sides of the road. Increases my odds dramatically of seeing the critters that seem to be lurking waiting to pounce...

I went with the yellow, no regerts.

 

Ever since I got my 19 Limited I’ve always wanted the TRD premium OEM roof bar and rails. Well did that today, and I am very happy now with subtle chrome look along with black throughout a good balance.

 

Here’s a better shot of the rails

 

Warmed up enough to do a couple of things. TRD Pro rack and bug deflector.

 

How the morning started (stock rims) ... vs how the morning ended (trail edition rims with new Toyo's in stock size). Now the quest for the unobtainium black oem lug nuts and the trail center caps which I just missed a set of 4 for $100

 

New rubber, Toyo Open Country R/T Trail in stock size, C load.

 

Nice @Tooly ! I contemplated those but already had one brand new AT3 sitting around so just picked up 3 more of those. Next time I may go with that but plan on bumping to E as I want more protection when offroad in the desert

 

I hummed & hawed about going E load but decided C would be sufficient for what I'm doing. They're replacing Toyo At3's and I decided to go more aggressive this time because I have dedicated winter tires so I don't need to worry about the snow performance of these.

 

Oh no using pressure to get my engine wet!



Also trying out Tuxmats.

 

Those mats look cool.

 

Hooked up the new trailer to do some work.

 

Wait, What?! We can do that to clean the engine bay? I’ve never tried and mine is super dirty inside.

 

Yup, we can. I've been doing it to my vehicles for years. Make sure you dry them off immediately afterwards. I use a cordless leaf blower. Lots of car details do the same thing.

 

Thanks as always! Love learning from this community!

 

Parked next to an ORP of same year with 285's and a King Lift.
Felt Small, LOL...maybe when I've worn out these tires....

 

Also....found a new little body corrosion point in the future...
Lower, outer edge of the spoiler, on both sides.
Seems it will move enough on bumps to chip paint but not wear down the primer.
On the task list to pull the spoiler and see about adding some rubber spacers.
Have to pull the ladder off though so it will be left to a lazy Sunday afternoon this summer.

Chemical Guys Foam guns for hand washing is damn fun and effective, if you have a pressure washer. Highly recommended.

 

Drove the 2011 to watch the grandkids while my daughter and her husband went to there C.E. for eye doctor

 

Also installed theses as well. Very good fit, and extremely happy compared to my stock OEM ones. The OEM ones were curling up around the edges.

 

I haaaaaaaaaaaaaaate when that happens. Most of the time, I feel like the biggest truck in the parking lot, even when I park next to other 4Runners. But on occasion, someone with a 3" lift and 35's parks next to me. Doesn't matter if it's a 4Runner or not, it makes me feel like I'm getting into a Corolla.

 

Finally installed my new Sherpa Crestone. Its been sitting in my garage for a few weeks. Made some adjustments after I took this photo, it sits much lower in the front now. Very happy with it.

 

My son and I finished mounting the switch panel in the cab today. Thank you @Photon_Chaser for all of your help and ideas on mounting. We pulled the wire through the firewall and up the A-pillar (being very careful of the airbag) and through the headliner. I added washers on the left and right side of the bracket as the control panel is a little rounded and didn't want it rocking left and right when engaging the buttons. Next weekend we will do the wiring in the engine bay.