What have you done to your 5th Gen 4Runner today?

Technically your 4Runner is a 40th anniversary since it’s a 2023. Not the 40th anniversary special edition but still valid to have a 40th anniversary badge on it in my opinion

 

really lame that Toyota put 1 of 4040 on the badge. Would’ve been a lot more unique if it was the production number out of 4040 (i.e. #23)

 

Just added Thule 60" Rack System and now ready to go with Hobie Revo 13's!

 

washing, and testing hood scoop leakage on hood carpet for @garoto.
ever put your 4R on ramps and immediately wish you had a 10” lift instead of 3"?

 

Finished the Victory 4x4 rear bumper install with the rear camera and license plate relocate. Install wasn't too bad. Some experience with auto electrical is beneficial. (But even this experience forgot to tape that red wire before sticking the light on.)

If I remember to, I'm going to get an aftermarket 6 wire connector. Those male/female spade connectors are a bitch to use. Usually need pliers...



And got the skid plate collection out to find out I did not receive the engine plate hardware and maybe not the rear diff plate hardware too. That's why we check such things.

 

shammied wheels

 

First oil change! 5927 miles. I haven’t done my own oil change in probably 30+ years but being mechanically inclined and having most of the tools I needed I decided to start doing my own maintenance and learn more about my 4Runner. Mobil 1 oil. Did the metal filter housing swap. OEM filter, washer.

While I was at the parts store picking up an oil drain pan I noticed they had an AVS Aeroskin hood protector marked down which I had been contemplating so grabbed that also.

Also changed the mower oil and mowed for the first time this spring.

A productive day.

 

Changed the engine oil and did a transmission fluid drain & fill.



Drain plug & check plug gasket P/N 3517830010

Brass transfer pump: https://www.canadiantire.ca/en/pdp/south-bend-brass-oil-transfer-hand-pump-0792462p.0792462.html
Pump needs 3/8" clear tubing: https://www.princessauto.com/en/nsf-clear-pvc-tubing-10-ft/product/PA1000001581?skuId=8576688

 

Morimoto...hai!!
Gen 2 headlights with white drl, and black xb fogs.
fogs are maybe just a bit less bright than oem led fogs, but the black housing just disappears.
The sequential signal is cool.

Next up, folding mirrors and sequential turn signal mirrors and edge light.

 

blackened

 

phew, this fender tape line worked out OK

 

Oh bummer, lost all your sponsorships? That sucks, sorry dude.

 

Those look fantastic, especially with the MGM paint.

 

Thanks for choosing us, we appreciate it!

 

Are you running 265/70/17 tires? If so, any rubbing? I'm running 265/70/17 tires on those same rims with 1.25" spacers and having some rubbing. I've already snipped some plastic from the bumper and did the fender move-in mod, but still have the rubbing. I'm thinking about just ditching the spacers.

 

They're WellVisors. Had them on for about 6 months now. Way nicer than the in-channel WeatherTech ones I used to have.

 

Hah!
Ya man my sponsors figured out the 4R is my wife and kids daily and only conservative wheeling is allowed at this time, so I got dropped.
Understandably, I had to delete their stickers. Their loss
jk

 

What prompted the removal of the other stickers? Any issues with Icon, Pro Comp, BC4runners?

 

Funny ur the first person to ask, most have seized the perfect opportunity to bust my balls that I finally de-stickered.

I've actually had no bad experiences at all, I like those stickers / brands. But nothing lasts forever I always say, and my tastes keep changing in styles.

 

Does anyone have recommendations for a good radiator guard?

ivd noticed my radiator has small rock impacts and I don’t want it to get worse


Anytime I buy a new bike I add one right away since it’s more exposed. Now I’m thinking I want to do the same to the 4Runner

 

If you like graphics from Toyota. 24% off and free shipping.

https://autoparts.lhmtoyotalemongro...runner-tire-tread-graphics-package-pt92989240

 

That's what we do best on this site, right!?

 

I'm adding aluminum mesh to the whole grille tomorrow night.
Prolly helps a little, the grille is gaping otherwise.

Radiator guard on the inside, smart idea.
*edit: I suppose my answer to your actual question is no, lol

 

The Home Depot Gutter Guard mod was popular a few years ago. I'm not sure with the 2020 and newer models if the sensor will allow it. I have an '18 SR5. The gutter guard is $5. You will need 2 of them. It fit on the lower grill with no cutting at all. I had to make a pattern and cut the GG to fit the top grill. Attached with zip ties.

Or you could go all out.

 

Thanks @djwantke @Stoney Ranger

The sensor is on the outside so I don't think it'll be an issue.
For that price, it doesnt hurt to try at least.

 

Did my exhaust yesterday. Went with the Flowmaster Outlaw Extreme Cat-Back Exhaust System. Got it from a buddy of mine who had it for a few months but ended up going a different route.

 

First of all, that's your A/C condenser...

I've used this mesh on three of my Tacoma plate bumpers with good results. The powdercoating has demonstrated good durability. Pick a size and color that fits your application: https://www.customcargrills.com/proddetail.asp?prod=Perf-Hex

 

Working on my mini-camper organization. With the overhead molle shelf, I decided I wanted something to hang from it to organize lighter items (clothes etc). I eventually found the Pack Gear Hanging Suitcase Organizer on Amazon. It comes in four sizes - this is XL. It's a light fabric, but the zippers appear quite solid. Seems to fit the bill and no overland tax. I'll see how it holds up over time...

 

So it just dumps underneath the vehicle? Is that street-legal?

 

Dumps right before the rear axle & idk I guess it depends on what state you’re in if it’s street legal.