1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

What year did yota remove the auxiliary (aux) port?

Discussion in '5th Gen 4Runners (2010-2024)' started by Steve Berman, Feb 21, 2024.

  1. Feb 21, 2024 at 4:35 PM
    #1
    Steve Berman

    Steve Berman [OP] New Member

    Joined:
    Sep 22, 2023
    Member:
    #35806
    Messages:
    165
    Is there no aux jack in the back of the 2023 MY head unit? Not seeing anything like I recall in the 2019 models (attached).

    Is my only option a new radio or some bt or fm transmitter?

    if so, next thread will be, recommendations on head unit with nav & aug?

    Thank you in advance!

    Photo from 2019 EBAY MODEL
    What I have is three usb ports, 1 carplay and 2 2.4a charging
    What I want is an aux port:

    auxbaby1 Large.jpg
     
    This site contains affiliate links for which the site may be compensated.
    #1
  2. Feb 21, 2024 at 4:42 PM
    #2
    Steve Berman

    Steve Berman [OP] New Member

    Joined:
    Sep 22, 2023
    Member:
    #35806
    Messages:
    165
    About to go look in the rear cargo area... if there is an aux port back there :X
     
    djwantke likes this.
  3. Feb 21, 2024 at 4:46 PM
    #3
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,536
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    2020 prolly
    Another reason I always say buy from the facelift of 2014, to 2019.
    They even fudged your steering wheel volume and next track controls for all of eternity.
    But then again, I'm notorious for bashing modern 4R tech like the windshield and bumpers $$$ :p
     
  4. Feb 21, 2024 at 4:50 PM
    #4
    siblue

    siblue Old member

    Joined:
    Apr 29, 2016
    Member:
    #1950
    Messages:
    538
    Gender:
    Male
    First Name:
    Ryan
    Socal
    Vehicle:
    24 Land Cruiser
    Removed AUX after 2019
    2020-current USB only with wired CarPlay.
     
    icebear and Steve Berman[OP] like this.
  5. Feb 21, 2024 at 4:53 PM
    #5
    Steve Berman

    Steve Berman [OP] New Member

    Joined:
    Sep 22, 2023
    Member:
    #35806
    Messages:
    165
    So. darn. true.

    Funfact: if you set the mini gauge cluster screen to "radio", you end up with:
    1 (steering wheel left side) up/down changes chanel
    2 (steering wheel left side) right//left changes vol
    3 (steering wheel right side) up/down changes channel
    4 (steering wheel right side) right/left changes the mini gauge mode to something else.

    So.. if you're dumb like me and program the same station into sequential fav slots, things can get really confusing.
    :bananadance:
     
  6. Feb 21, 2024 at 7:16 PM
    #6
    semprenissart

    semprenissart Mèfi

    Joined:
    Dec 22, 2021
    Member:
    #24758
    Messages:
    885
    Arizona
    Vehicle:
    2022 4Runner TRD Pro (MGM)
    Westcott Sliders. Gobi no rise
    The new head unit is arguably better than the old one. Toyota got its fair amount of criticism by many many owners with the old HU and entune

    what’s the advantage of the old HU over the new one?
    Also who uses an AUX port nowadays? Personally, I’m glad Toyota finally put CarPlay in the 4R. I would’ve been very annoyed if they didn’t.
    The only downside that I can see about removing the aux port is that a phone/device cannot play music while CarPlay is being used by another phone. But that’s not really an AUX issues, it’s Toyota not allowing to play music via Bluetooth while another phone is using CarPlay. Plenty of other brands allow it so I don’t know why Toyota doesn’t

    ps: I agree with the steering wheel volume control though
     
    Last edited: Feb 21, 2024
    This site contains affiliate links for which the site may be compensated.
    #6
  7. Feb 21, 2024 at 7:45 PM
    #7
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,536
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Interesting!
    Great information, and true, the old headunit is ancient and needed to go.
    There was one time I wanted aux for some reason and that was satisfying it had it
    I've never heard about those issues good to hear. Of course Toyota skimped out on 4R interior capabilities, that's what they do
     
  8. Feb 21, 2024 at 10:49 PM
    #8
    Steve Berman

    Steve Berman [OP] New Member

    Joined:
    Sep 22, 2023
    Member:
    #35806
    Messages:
    165
    I'm okay with the new features, but not at the expense of loosing the old. Especially on a 5th gen 4runner that's been produced for the past 15 years. Who would pick a 4runner with the expectation that it wouldn't have an aux port? Even the Macbook M2 still has an aux port. I feel violated.
     
  9. Feb 22, 2024 at 1:03 AM
    #9
    RunningBear

    RunningBear New Member

    Joined:
    Jan 14, 2023
    Member:
    #30640
    Messages:
    192
    Gender:
    Male
    SoCal
    Vehicle:
    2023 TRD ORP, Lunar Rock, KDSS
  10. Feb 22, 2024 at 1:16 AM
    #10
    Slopemaster

    Slopemaster Slope Survivalist

    Joined:
    Mar 20, 2021
    Member:
    #20442
    Messages:
    3,090
    Gender:
    Male
    Idaho
    Vehicle:
    2018 SR5
    265-70-17 Ridge Grapplers, TRD Pro rims, 3M precut bra, N-Fab nerf/steps
    I use the AUX Port to charge my phone and never use the radio.
     
    Steve Berman[OP] likes this.
  11. Feb 22, 2024 at 12:34 PM
    #11
    backpacker

    backpacker New Member

    Joined:
    Apr 22, 2023
    Member:
    #32515
    Messages:
    2,187
    Gender:
    Male
    Vehicle:
    2023 TRD ORP
    RSG sliders, Falken Wildpeak 265/70R/17 E
    Steve Berman[OP] likes this.
  12. Feb 22, 2024 at 12:58 PM
    #12
    LCJ77

    LCJ77 New Member

    Joined:
    Jul 12, 2022
    Member:
    #27794
    Messages:
    1,060
    Gender:
    Male
    First Name:
    Kevin
    Gilbertsville,Pa.
    Vehicle:
    2023 TRD Pro Ice Cap
    Ceramic Tint, D/S grab Handle, waiting for Brite Box Anytime, may add Raptor lights
    I guess I used the AUX port for my Garmin GPS only, never thought about it on new 4Runner?
     
    Steve Berman[OP] likes this.
  13. Feb 22, 2024 at 4:01 PM
    #13
    Old Tanker

    Old Tanker New Member

    Joined:
    Jan 22, 2023
    Member:
    #30816
    Messages:
    126
    Gender:
    Male
    First Name:
    Keith
    Vehicle:
    "Matilda" 2019 ORP
    Front: Hefty. Rear: LFD. Sliders: RSG. Armor: LFD and Bud Built. Tires: KM3. Switchpro.
    I use it on group rides to plug my GMRS sound into the AUX port, allowing me to listen to the GMRS over the vehicle sound system.
     
    Steve Berman[OP] likes this.

Products Discussed in

To Top