New lift alignment

Is this alignment report good or should I have them fix it?

 

What's going on with the LF caster? Did they even try to get it in spec?

 

I don't know, I did not read the specs until I was home.

 

How much are you lifted?

 

2.5 Bilstein lift with spc uca and 1.5 in rear

 

Stock UCA's?

 

Spc uac

 

Doesn't look bad. How's it drive?

 

While the it performs well on main roads, it can feel less composed on uneven backroads. This might be attributed to the removed XREAS system, lift kit, and wider tires, but it's worth noting that the impact is minimal.

 

Yeah, it's not dramatically out of spec, but that after measurement worse instead of better, so I wondered if they just measured before and after lift without aligning.

 

You can get more caster if you wanted it. Especially with the SPC UCA's.

Just depends on how it drives for you. I definitely prefer 3.5-4 degrees of caster personally; The rig will track straighter on the freeway. But some argue that it can cause a bit more tramlining (following ruts in the road) and also work the power steering a little harder. But wider tires can also cause both of those things as well.

Hard to say if what your describing is because of the alignment. I might drive it a little more then call the shop and ask for their opinion on it.

If it annoys you, have them correct it. But the alignment itself doesn't look terrible.

 

Im happy with it, its smoother over bumps and way smoother over big bumps. The steering is not as good as it was with the 20 inch rims with xreas. But it's not bad.