1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

What have you done to your 5th Gen 4Runner today?

Discussion in '5th Gen 4Runners (2010-2024)' started by Bob, Jul 24, 2016.

  1. Jan 28, 2024 at 10:26 AM
    Borracho Loco

    Borracho Loco My 4Runner identifies as a Prius!

    Joined:
    Sep 23, 2023
    Member:
    #35824
    Messages:
    3,127
    Gender:
    Male
    Dallas/Ft Worth
    Vehicle:
    2023 40th Anniversary Special Edition
    Oooh look, another mod.....

    I thought about getting a dash cam like the Nexar (before the FitCamX I previously had a Garmin Mini2), but I don't want a screen on the dash cam, that'd be distracting. I can easily pop out the mini-sd card and view it on my laptop or just download it to my phone via the app.

    Also, the FitCamX is fixed in place. So I'm always getting the correct view & angle. Sometimes when cleaning my window, I would bump the old dash cam and then have to re-align it. Very annoying. Plus it looked like an aftermarket accessory that was installed. Which it was, but the FitCamX isn't noticeable at all. It looks OEM and like it's part of the overhead console.


     
    BX22BR, 4Daughters and LCJ77 like this.
  2. Jan 28, 2024 at 10:30 AM
    RusPro17

    RusPro17 Back home again!!

    Joined:
    Sep 26, 2017
    Member:
    #4821
    Messages:
    1,781
    Gender:
    Male
    First Name:
    Don
    Pa.
    Vehicle:
    2023 TRD Pro Solar Octane
    SCS wheels and Westcott lift
    I think they should clear no problem. My 20 AG Pro had the Eibach springs and 285’s with SCS wheels and I removed the oem mudflaps and added the Rockbloz flaps because they are tighter fit. Which UCA’s brand you going with?
     
  3. Jan 28, 2024 at 10:36 AM
    LCJ77

    LCJ77 New Member

    Joined:
    Jul 12, 2022
    Member:
    #27794
    Messages:
    1,207
    Gender:
    Male
    First Name:
    Kevin
    Gilbertsville,Pa.
    Vehicle:
    2023 TRD Pro Ice Cap
    Ceramic Tint, D/S grab Handle, waiting for Brite Box Anytime, may add Raptor lights
    I didn't see a camera for 2023 4Runner or for a 4Runner any year make on their site? Never mind after digging found it.
    https://fitcamx.com/collections/toyota
     
  4. Jan 28, 2024 at 10:39 AM
    Borracho Loco

    Borracho Loco My 4Runner identifies as a Prius!

    Joined:
    Sep 23, 2023
    Member:
    #35824
    Messages:
    3,127
    Gender:
    Male
    Dallas/Ft Worth
    Vehicle:
    2023 40th Anniversary Special Edition
    Oooh look, another mod.....

    Yeah, not sure why it's not listed on their site. I got mine on Amazon, that links directly to their site?

    https://www.amazon.com/gp/product/B09PNJ3JSW?ie=UTF8&th=1

    Screenshot 2024-01-28 123957.png
     
  5. Jan 28, 2024 at 10:51 AM
    Detroitable

    Detroitable New Member

    Joined:
    Jan 9, 2024
    Member:
    #37807
    Messages:
    7
    Gender:
    Male
    First Name:
    Patrick
    I've been looking around for a 4runner and this popped up. It's sold but I thought the wrap up top was kind of cool. DifferentUsed-2021-Toyota-4Runner-TRD-Pro-1632433230 (1).jpg
     
  6. Jan 28, 2024 at 10:54 AM
    Reimj

    Reimj New Member

    Joined:
    Nov 26, 2023
    Member:
    #36921
    Messages:
    15
    Vehicle:
    2023 ORP
    That's pretty sharp looking.
     
    Detroitable likes this.
  7. Jan 28, 2024 at 1:40 PM
    TrailSpecial22

    TrailSpecial22 New Member

    Joined:
    Aug 18, 2022
    Member:
    #28262
    Messages:
    2,017
    Gender:
    Male
    First Name:
    Adam
    PA
    Vehicle:
    2022 Trail Special Edition Lunar Rock
    2” lift Bilstein 6112 w/600 lb coils front, 1.5” lift Eibach T13 coils rear, Bilstein 5100 rear shocks, TRD skidplate, TRD stainless catback w/black TRD side exhaust, TRD shifter handle, Weathertech bug deflector, 20% tint front, LED door bulbs, 285/70/17 Falken WP AT3, Energy Suspension front bumpstops, SSO Slimline Bumper w/ Badland Shackles, Durobumps 4.25” rear
    thank you! Chip shot at 35 yards.
     
    Stoney Ranger[QUOTED] likes this.
  8. Jan 28, 2024 at 2:18 PM
    Wawa 4runner

    Wawa 4runner New Member

    Joined:
    Apr 5, 2023
    Member:
    #32196
    Messages:
    68
    Gender:
    Male
    Vehicle:
    2024 4Runner ORP
    Got the front windows tinted last week

    20240128_145838.jpg
     
    JChiz, The Knitted Brow, BS67 and 6 others like this.
  9. Jan 28, 2024 at 2:27 PM
    BTWGarage

    BTWGarage New Member

    Joined:
    Jan 28, 2024
    Member:
    #38174
    Messages:
    20
    Gender:
    Male
    First Name:
    Brad
    Vehicle:
    2017 TRD Pro
    Rays TE37SL, 285 KO2s, Radflo Suspension, Shockworks Sliders, Morimoto Gen 2 Headlights and Taillights, JL 12W7/750HD, Accessorides Remote Start, plus more
    Morimoto Gen 2 Headlights and Taillights this past week

     
  10. Jan 28, 2024 at 2:33 PM
    PVT Pablo

    PVT Pablo

    Joined:
    Mar 10, 2016
    Member:
    #1694
    Messages:
    2,387
    First Name:
    Paul
    Kitsap County, WA
    Vehicle:
    2016 4Runner TRD Pro
    Solid choice. Morimoto especially nailed the tail lights compared to the competition.
     
    BTWGarage[QUOTED] likes this.
  11. Jan 28, 2024 at 2:51 PM
    Photon_Chaser

    Photon_Chaser 50,108 and counting…

    Joined:
    Sep 4, 2023
    Member:
    #35473
    Messages:
    1,368
    Gender:
    Male
    Sierra Nevada Mountains and the Central Coast
    Vehicle:
    21 TRD Pro - "Photon"
    Been a busy week, designed and 3D printed a variety of adapters and thingamabobs to clean up some installs...

    869D0310-8033-4208-949B-5892CEDA6748.jpg
     
  12. Jan 28, 2024 at 5:21 PM
    BS67

    BS67 8404 USMC Doc

    Joined:
    Jan 26, 2024
    Member:
    #38143
    Messages:
    7,427
    Gender:
    Male
    CC Ne
    Vehicle:
    2023 SR5 Premium
    Drove the '23 to church this morning then to take the wife grocery shopping! Pretty exciting!
     
  13. Jan 28, 2024 at 5:28 PM
    TrailSpecial22

    TrailSpecial22 New Member

    Joined:
    Aug 18, 2022
    Member:
    #28262
    Messages:
    2,017
    Gender:
    Male
    First Name:
    Adam
    PA
    Vehicle:
    2022 Trail Special Edition Lunar Rock
    2” lift Bilstein 6112 w/600 lb coils front, 1.5” lift Eibach T13 coils rear, Bilstein 5100 rear shocks, TRD skidplate, TRD stainless catback w/black TRD side exhaust, TRD shifter handle, Weathertech bug deflector, 20% tint front, LED door bulbs, 285/70/17 Falken WP AT3, Energy Suspension front bumpstops, SSO Slimline Bumper w/ Badland Shackles, Durobumps 4.25” rear
    any pics of the new ride?
     
    BS67[QUOTED] likes this.
  14. Jan 28, 2024 at 5:30 PM
    BS67

    BS67 8404 USMC Doc

    Joined:
    Jan 26, 2024
    Member:
    #38143
    Messages:
    7,427
    Gender:
    Male
    CC Ne
    Vehicle:
    2023 SR5 Premium
    Got a couple on my phone. I'll get 'em posted up here!
     
  15. Jan 28, 2024 at 5:36 PM
    BS67

    BS67 8404 USMC Doc

    Joined:
    Jan 26, 2024
    Member:
    #38143
    Messages:
    7,427
    Gender:
    Male
    CC Ne
    Vehicle:
    2023 SR5 Premium
    Heres a couple from yesterday at the dealer and this morning in the church parking lot. IMG_0520.jpg IMG_0521.jpg
     
  16. Jan 28, 2024 at 7:31 PM
    ToyotFan

    ToyotFan New Member

    Joined:
    Oct 17, 2023
    Member:
    #36203
    Messages:
    208
    Vehicle:
    2023 TRD ORP
    Had undercoat corrosion protection applied this past weekend from my detailer. It goes on clear and is a one and done application. Very happy with it!
     
    kmeeg likes this.
  17. Jan 28, 2024 at 10:24 PM
    TacoGeeloor

    TacoGeeloor New Member

    Joined:
    Mar 16, 2023
    Member:
    #31809
    Messages:
    125
    Gender:
    Male
    First Name:
    Chad
    Vehicle:
    2023 Lunar Rock TRD Off Road Premium
    It’s all on how you use it…looks like you’re getting all you can out of it! Or so I’m told anyway
     
  18. Jan 29, 2024 at 9:52 AM
    Anomaly

    Anomaly New Member

    Joined:
    Oct 23, 2023
    Member:
    #36319
    Messages:
    21
    Gender:
    Male
    Vehicle:
    2018 TRD ORP
    Installed and adjusted H9s. Have to admit the light output is significantly better!
     
  19. Jan 29, 2024 at 10:29 AM
    Thacrow

    Thacrow New Member

    Joined:
    May 30, 2021
    Member:
    #21719
    Messages:
    1,612
    Gender:
    Male
    NorCal
    Vehicle:
    2021 ORP
    Speed holes
    You got a build or how to thread on this?
     
  20. Jan 29, 2024 at 11:04 AM
    kolter45

    kolter45 Inferno Pro & 4.0 Tacoma

    Joined:
    May 7, 2022
    Member:
    #26975
    Messages:
    741
    Gender:
    Male
    Denver
    Vehicle:
    Inferno Pro & BRM Sport
    I agree. It's total crap that they come with the SEMA wheels. The SEMA wheels look terrible compared to the new ones. No way I'm paying $60k for SEMA wheels :bananadead:
    I had heard its just a shortage on the center caps. You can buy the wheels & center caps off BAM so I'm not sure why they're still doing this :notsure:

    w w w. bam whole sale parts.com/oem-parts/toyota-ptr56-89210-f2-toyota-trd-pro-17-quot-6-spoke-flat-black-wheel-oem-ptr5689210f2?origin=pla&gad_source=1&gclid=CjwKCAiAtt2tBhBDEiwALZuhANj7cd-Pb3sNgDZbLszolIP0yom0HBJiBRHKVPU8fwcRPJpGMXQoGhoCd_cQAvD_BwE

    w w w. bam whole sale parts.com/oem-parts/toyota-pt280-89210-f2-trd-pro-wheel-center-cap-toyota-pt280-89210-f2-pt28089210f2
     
    semprenissart likes this.
  21. Jan 29, 2024 at 11:33 AM
    Gamecock4Runner

    Gamecock4Runner New Member

    Joined:
    Jan 24, 2024
    Member:
    #38105
    Messages:
    28
    Gender:
    Male
    First Name:
    Matt
    Vehicle:
    "Well...are you gonna do something? Or just stand there and bleed."
    3 inch RC lift kit, 17X9 RC 0 offset wheels, Faulkin Wilderpeak 285/70/17s, Tyger rack system, rear splash guard delete, TRD pro grill and more to come...
    Had a big chip in the pass side dash trim, found that Tuffskinz sells an easy to install vinyl with rubber grip texture on Etsy. Fit like a glove and was easy to install. Looks just like the rubber grips on my pistols.
     
  22. Jan 29, 2024 at 1:15 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    4,020
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Used the 4R Craftsman mobile compressor to save my stupid Ford work van dead in the water.
    Good to go for an emergency service call in North Vancouver.

    IMG_20240129_124656685~2.jpg
    IMG_20240129_130047282_HDR.jpg
    IMG_20240129_130000891_HDR.jpg
     
  23. Jan 29, 2024 at 1:50 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    4,020
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    HuskerRunner likes this.
  24. Jan 29, 2024 at 2:16 PM
    Steely123

    Steely123 What's the new trend? I'll do it!

    Joined:
    Jun 4, 2022
    Member:
    #27323
    Messages:
    3,728
    Gender:
    Male
    TX
    Vehicle:
    2018 4runner SR5 premium
    Installed front cam. First useful mod in a while. Lol.

    IMG_1961.jpg
     
  25. Jan 29, 2024 at 3:07 PM
    kojak

    kojak New Member

    Joined:
    Sep 19, 2023
    Member:
    #35749
    Messages:
    281
    Gender:
    Male
    Vehicle:
    21 SR5P 4x4
    No but it's fairly simple. Used 2x 16ft 12v 5mm amber strips. Cleaned the arms with IPA, cut the strips to size and stuck them in place, adding tape wraps at each end to discourage peel-up.

    Ran a single pair 20awg through the main awning extrusion and solder spliced everything together to a single female jack, with extra abrasion protection where the wires might rub. Powers off the cigarette lighter or the 12v jack on the bluetti.

    It draws about 90 watts and is crazy bright; I ordered a dimmer/remote to try. Parts linked below.

    https://www.amazon.com/gp/aw/d/B08H21T5LR
    https://www.amazon.com/gp/aw/d/B0B1X5WF1H
    https://www.amazon.com/gp/aw/d/B0C5DVSZSD
    https://www.amazon.com/gp/aw/d/B08D6FC2T6
     
    Yazzman and Thacrow[QUOTED] like this.
  26. Jan 29, 2024 at 4:01 PM
    COL4Runner

    COL4Runner New Member

    Joined:
    Jan 29, 2024
    Member:
    #38185
    Messages:
    46
    Gender:
    Male
    Installed LFD crossbar kit, blackout emblem overlays, pro grill and pro grill lower valance, 2/1 lift Bilstein 5100/cornfred, baja design squadron pro ditch lights, pro wheels and Toyo ATIII 275's, and Go Rhino rb20 slim line boards. ok ok not today but all in the last week! Have the Solidify rear storage, Husky liner full set, and Cartrim home front skid coming this week then I'm DONE!
     
    HuskyMike and djwantke like this.
  27. Jan 29, 2024 at 4:19 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    4,020
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Impressive, busy man this week! Congrats on all that. If you have a wife, don't tell her that total cost
     
    Thacrow likes this.
  28. Jan 29, 2024 at 4:21 PM
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    5,825
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s
    Not sure about older model, but my 21 has an “eco gauge” setting with that has more bars that light up the harder you press on the gas.
    The fact it’s labeled ECO gives the impression you’re being more ECO if you have more bars lit up lol. I have a feeling Toyota did that so you could choose to believe that if you wanted haha
     
    Treggit and djwantke like this.
  29. Jan 29, 2024 at 4:27 PM
    COL4Runner

    COL4Runner New Member

    Joined:
    Jan 29, 2024
    Member:
    #38185
    Messages:
    46
    Gender:
    Male
    The wife was the issue, on the drive home she was telling me to get to ordering when we got home as these tires SUCK.
     
    djwantke[QUOTED] likes this.
  30. Jan 29, 2024 at 4:33 PM
    BS67

    BS67 8404 USMC Doc

    Joined:
    Jan 26, 2024
    Member:
    #38143
    Messages:
    7,427
    Gender:
    Male
    CC Ne
    Vehicle:
    2023 SR5 Premium
    Drove the SR5 to work this morning........filled up with gas at noon.........drove 'er home! Loved every mile!
     
    ToyotFan and raimieb like this.

Products Discussed in

To Top