1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

What have you done to your 5th Gen 4Runner today?

Discussion in '5th Gen 4Runners (2010-2024)' started by Bob, Jul 24, 2016.

  1. Jan 13, 2024 at 12:31 PM
    playdixie

    playdixie Missi'ppi Fella

    Joined:
    Apr 19, 2022
    Member:
    #26734
    Messages:
    530
    Gender:
    Male
    First Name:
    Jason
    Missi'ppi
    Vehicle:
    2021 Toyota 4Runner TRD Off Road Premium
    I had to go back and find these pics from.Feb 17-19, 2021. It felt like Canada (no offense meant) outside for nearly a week. But it was single digits for a couple of days. At the time I was driving a lifted Tacoma.

    And I'm afraid this is what's gonna happen.

    Again.

    But funny side note: a week later we were in the 60s-70s.

    20210217_180339.jpg 20210217_180641.jpg 20210218_163947.jpg 20210218_163959.jpg 20210218_164109.jpg 20210218_164216.jpg
     
  2. Jan 13, 2024 at 12:50 PM
    Borracho Loco

    Borracho Loco My 4Runner identifies as a Prius!

    Joined:
    Sep 23, 2023
    Member:
    #35824
    Messages:
    2,483
    Gender:
    Male
    Dallas/Ft Worth
    Vehicle:
    2023 40th Anniversary Special Edition
    Oooh look, another mod.....

    From this day forth, you will be known as "Mr. Plow". Or Homer? Your choice!



    [​IMG]
     
    playdixie likes this.
  3. Jan 13, 2024 at 1:02 PM
    RumHamRunner73

    RumHamRunner73 Dead on with a zero

    Joined:
    Nov 24, 2022
    Member:
    #29771
    Messages:
    2,763
    Gender:
    Male
    First Name:
    Philip
    Oakboro, N.C
    Vehicle:
    2022 4 Runner Limited. Blizzard Pearl
    2nd on Mr Plow.
     
  4. Jan 13, 2024 at 1:59 PM
    Stoney Ranger

    Stoney Ranger New Member

    Joined:
    Mar 19, 2021
    Member:
    #20419
    Messages:
    1,019
    Gender:
    Male
    Driftless Area
    Vehicle:
    '18 SR5 Nauti Blue
    4x Rockers/Skids-Dobi-275's-Fr/R Bpr-Winch-Stickers-ALF
    :facepalm:You fuggers had to go there, didn't you? I haven't been behind the wheel of a plow in 12 years.
     
    McSpazatron and playdixie like this.
  5. Jan 13, 2024 at 2:03 PM
    bronzestar1

    bronzestar1 New Member

    Joined:
    Jan 5, 2024
    Member:
    #37732
    Messages:
    359
    Gender:
    Male
    Vehicle:
    2023 Limited magnetic gray with redwood interior
    275/55-20s, Airaid CAI, Summit muffler, oil catch can
    For places that aren't used to getting anywhere near that kind of snow, it will bring life to a standstill. Here in SE VA and coastal NC, govt / businesses / people lose their minds when there's a dusting and the roads and yards are completely covered, let alone accumulate several inches...
     
    playdixie[QUOTED] likes this.
  6. Jan 13, 2024 at 2:10 PM
    bronzestar1

    bronzestar1 New Member

    Joined:
    Jan 5, 2024
    Member:
    #37732
    Messages:
    359
    Gender:
    Male
    Vehicle:
    2023 Limited magnetic gray with redwood interior
    275/55-20s, Airaid CAI, Summit muffler, oil catch can
    Installed a Pedal Commander, took it out for a short test drive, have it currently set at Sport +2. Increase in throttle response is definitely noticeable, so we'll see how it does when merging onto the freeway, and passing someone (hardly a 4R's strong suit). Also installed the Cali Raised interior LED light bulb kit (map x 2, vanity x 2, dome, rear cargo x 2, license plate x 2, doors x 4, puddle x 2, glove box), heck of a lot brighter, with crisper white light. Only ones left to do are the puddle lights, but I'm saving those for tomorrow. I'm not going to install the glove box bulb, I've read it's VERY difficult to do.
     
    jake long15 and djwantke like this.
  7. Jan 13, 2024 at 3:43 PM
    das goot

    das goot New Member

    Joined:
    Nov 18, 2023
    Member:
    #36792
    Messages:
    13
    Gender:
    Male
    Portland, Maine
    Vehicle:
    2015 SR5 4runner
    dual AGM batteries, 6' bedslider w/ packout bases, custom rock slider, crestone sport rack
    installed my sherpa crestone sport rack today. I have been wanting this style roof rack twice as long as I have owned my 4runner. hands down a very well thought out roof rack. I was thinking the sport version might be a cheaper version of it's big brother but there isn't anything cheap or cheezy about the sport version build or material wise...being a super low full length roof rack now I can finally truck my 1970's 17' grumman aluminum canoe or a couple of bundles of 1/2"-3/4" EMT around and not worry!

    IMG_20240113_165250097.jpg

    IMG_20240113_165325352.jpg
     
    Last edited: Jan 13, 2024
  8. Jan 13, 2024 at 4:54 PM
    replica9000

    replica9000 New Member

    Joined:
    Sep 7, 2019
    Member:
    #11179
    Messages:
    565
    First Name:
    Jason
    New Vertiform City
    Vehicle:
    2019 TRD OR Premium
    Dobinsons 2.5" lift. Cooper AT3 XLT 295/70R17.
    Never heard it called that before.

    Here in southern New England, we used to get dumped on every other week. We haven't had that much snow in the last several years though. We get a storm, then the temp spikes and it's all melted within the next day or two. It was actually 60 and sunny today. Strange even for New England weather.
     
    das goot likes this.
  9. Jan 13, 2024 at 5:04 PM
    Reimj

    Reimj New Member

    Joined:
    Nov 26, 2023
    Member:
    #36921
    Messages:
    15
    Vehicle:
    2023 ORP
    Weekend snow is fine. Its the weekday stuff when having to deal with the other knuckleheads on the roads drives me (no pun intended) crazy. :)
     
  10. Jan 13, 2024 at 5:46 PM
    bobby35

    bobby35 New Member

    Joined:
    Mar 18, 2023
    Member:
    #31834
    Messages:
    46
    Gender:
    Male
    Today i swapped the front diff needle bearing for the ECGS busĥing, will see tomorrow if it get rid of my vibration in 50-60 kmh and floorboard vibration too , the axle shaft was insanely loose
    20240113_144318.jpg 20240113_173132.jpg 20240113_143512.jpg 20240113_134505.jpg

    20240113_145806.jpg
     
  11. Jan 13, 2024 at 9:42 PM
    aesthetics

    aesthetics New Member

    Joined:
    Jul 24, 2019
    Member:
    #10676
    Messages:
    51
    IMG_4063.jpg

    Tank skid plates are nice but relocate really cleans up the area! Snowbound custom one actually fits with majority of high clearance bumpers unlike the rago.
     
  12. Jan 14, 2024 at 8:33 AM
    Photon_Chaser

    Photon_Chaser 46612 and counting…

    Joined:
    Sep 4, 2023
    Member:
    #35473
    Messages:
    442
    Gender:
    Male
    First Name:
    Roger
    Sierra Nevada Mountains
    Vehicle:
    21 TRD Pro - "Photon"
    http://tinyurl.com/5th-Gen-Build-Page
    I chose this tank for the very same reason, but also to eliminate the OEM tank’s fill tube so that I can relocate my compressor into that front pocket.

    Besides, I doubt those washer pump ‘skid plates’ will hold up when the front end comes down on it.
     
    raimieb and djwantke like this.
  13. Jan 14, 2024 at 10:47 AM
    bronzestar1

    bronzestar1 New Member

    Joined:
    Jan 5, 2024
    Member:
    #37732
    Messages:
    359
    Gender:
    Male
    Vehicle:
    2023 Limited magnetic gray with redwood interior
    275/55-20s, Airaid CAI, Summit muffler, oil catch can
    Installed the LED bulbs for the puddle lights (many thanks to the videos on Youtube for the how-to), and rerouted the wires for the Pedal Commander. They were a bit too close to what I think are the hard lines for the heater (those two lines got HOT). Going to leave the PC settings at Sport +2 for now.
     
  14. Jan 14, 2024 at 10:52 AM
    Rob41

    Rob41 Veteran

    Joined:
    Jun 23, 2023
    Member:
    #33566
    Messages:
    946
    Gender:
    Male
    First Name:
    Rob
    Northern Michigan
    Vehicle:
    2023 Supercharged 4Runner TRD
    Magnuson Supercharger, CSF Performance Radiator, Eibach Pro-Truck Series 2R suspension, SCS Ray10 Bronze Wheels, Pedal Monster, TRD Pro Grill, TRD Pro Roof Rack
    That's a great fix. ECGS is def the go to place.......let us know how it turns out.
     
    bobby35[QUOTED] likes this.
  15. Jan 14, 2024 at 12:17 PM
    The Knitted Brow

    The Knitted Brow New Member

    Joined:
    Nov 29, 2021
    Member:
    #24427
    Messages:
    335
    Gender:
    Male
    Vehicle:
    2020 White 4Runner
    Pardon the delayed reply. Currently on the NMBDR. While loading up for the trip I took the pictures without the opportunity to reply to your questions.

    From the passenger door, looking in.

    IMG_9946.HEIC.jpg

    From the passenger lower door, looking in.

    IMG_9947.HEIC.jpg

    From the top of the mount, looking into the footwell.

    IMG_9948.HEIC.jpg

    My Life [sic] is the only one who very rarely sits in the passenger seat and she commented on losing leg room but finds the top knob on the mount a place for her purse so that it's not on the floor a plus. Again, while the only person she rarely sits there. The longest trip was ~1k miles without the mount and only the base in place. Other few trips are ~10 mile radius from home doing errands during which I leave the mount in place. Final answer, both the pedestal and base dig into the passenger's left leg room and depending where that person perfers their feet in the footwell.

    The mount shaft and base are solid, no movement what so ever. The mount that holds your device is spring load, if empty it rattle even on asphalt sometimes. However, when loaded with an table/laptop it does not rattle, even offroad.

    Lastly, while my experience, I would not buy directly from RAM. Their customer service sucks! Example, when I purchased the kit, I purchase the wrong device holder and RAM would not exchange the wrong holder for the correct holder because, their claim, kits cannot be mixed or sustituded. Yet, the same mixes or substitutes, from RAM, can be purchased elsewhere. That said, the product is well made, durable, and I would purchase again, just not from RAM. Hope that helps. And pardon the delay.
     
    can0nfan2379[QUOTED] likes this.
  16. Jan 14, 2024 at 12:38 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,450
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Anybody else's cargo area double as a heated toddler outhouse / jiffy john? Served dad well

    IMG_20240114_123226905_HDR.jpg
     
  17. Jan 14, 2024 at 1:43 PM
    Slapping Kittens

    Slapping Kittens New Member

    Joined:
    Oct 30, 2023
    Member:
    #36442
    Messages:
    49
    Vehicle:
    2023 SR5P Barcelona Red
    where did you get that "TOYOTA" grill badge on your white 4runner?
     
    djwantke[QUOTED] likes this.
  18. Jan 14, 2024 at 1:56 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,450
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    @Slapping Kittens
    1. You're account name is the best.
    2. Hate to break your heart, I think your like the 5th person to ask this question. Very unfortunately, I bought it off Etsy Canada but it's been sold out for quite some time.

    https://www.etsy.com/ca/shop/QuickBubbleSort

    Screenshot_20240114-135323.png
     
  19. Jan 14, 2024 at 2:36 PM
    ipnpulz

    ipnpulz New Member

    Joined:
    Oct 14, 2018
    Member:
    #7455
    Messages:
    801
    Gender:
    Male
    Vehicle:
    2023 TRDOR premium T4R
    I have called it buger sugar
     
  20. Jan 15, 2024 at 2:09 AM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,450
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    one SPC bjoint was done tnite, second in the morn - took it a little too slow.
    first time for me.

    IMG_20240115_010227464.jpg
    IMG_20240115_011209549.jpg
    IMG_20240115_020017115_HDR.jpg
     
    playdixie, Dabigono and Brett Tech like this.
  21. Jan 15, 2024 at 2:32 AM
    raimieb

    raimieb Hobby Mechanic - Love Our 4Runner!

    Joined:
    May 16, 2022
    Member:
    #27095
    Messages:
    806
    Gender:
    Male
    First Name:
    raimie
    Vehicle:
    2021 ORP 4x4
    Lots…
    Better slow and steady on a repair. Great job! Glad it went well.
     
    djwantke[QUOTED] likes this.
  22. Jan 15, 2024 at 5:34 AM
    Borracho Loco

    Borracho Loco My 4Runner identifies as a Prius!

    Joined:
    Sep 23, 2023
    Member:
    #35824
    Messages:
    2,483
    Gender:
    Male
    Dallas/Ft Worth
    Vehicle:
    2023 40th Anniversary Special Edition
    Oooh look, another mod.....

    Ahh, those will be great stories for later in life. When your son/daughter has a group of their friends over you can say "Hey, remember when you use to shit in the back of my truck?"

    The best part about being a parent: Getting to embarrass your kids in front of their friends.
     
  23. Jan 15, 2024 at 7:52 AM
    HuskyMike

    HuskyMike New Member

    Joined:
    Jan 23, 2023
    Member:
    #30835
    Messages:
    585
    San Diego
    Vehicle:
    2023 4Runner TRD Off Road Premium- Nautical Blue
    Brings back memories. When they were young, on every trip with the kids, we'd take the "potty chair". Worked great in the back of the Sienna. Saved us plenty of times (sitting in traffic- "I have to go to the bathroom!").
     
    djwantke[QUOTED] likes this.
  24. Jan 15, 2024 at 8:56 AM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,450
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
  25. Jan 15, 2024 at 10:36 AM
    Rocko9999

    Rocko9999 New Member

    Joined:
    Apr 21, 2023
    Member:
    #32488
    Messages:
    1,134
    Vehicle:
    2011 Limited
  26. Jan 15, 2024 at 10:41 AM
    Yotaholic

    Yotaholic New Member

    Joined:
    Mar 8, 2023
    Member:
    #31655
    Messages:
    3,325
    Olympia, WA
    Greenwater, WA
     
  27. Jan 15, 2024 at 10:43 AM
    Rocko9999

    Rocko9999 New Member

    Joined:
    Apr 21, 2023
    Member:
    #32488
    Messages:
    1,134
    Vehicle:
    2011 Limited
    Nice, Northern Idaho looks so similar.
     
    Yotaholic[QUOTED] likes this.
  28. Jan 15, 2024 at 10:45 AM
    Yotaholic

    Yotaholic New Member

    Joined:
    Mar 8, 2023
    Member:
    #31655
    Messages:
    3,325
    Olympia, WA
    I like this Idaho more :D

    20231209_140834.jpg
     
  29. Jan 15, 2024 at 11:22 AM
    jake long15

    jake long15 New Member

    Joined:
    Apr 9, 2016
    Member:
    #1844
    Messages:
    848
    Gender:
    Male
    First Name:
    Jake
    Thanks for choosing us for you interior LED light bulb kit! Here is the link if anyone wants to check it out: https://caliraisedled.com/products/2010-2021-toyota-4runner-16pc-led-bulb-replacement-kit
     
  30. Jan 15, 2024 at 4:04 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,450
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Spc #2

    IMG_20240115_155236663_HDR.jpg
    IMG_20240115_161043801.jpg
     

    Attached Files:

    Last edited: Jan 15, 2024

Products Discussed in

To Top