1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

What have you done to your 5th Gen 4Runner today?

Discussion in '5th Gen 4Runners (2010-2024)' started by Bob, Jul 24, 2016.

  1. Jan 8, 2024 at 12:20 PM
    EatSleepTacos

    EatSleepTacos New Member

    Joined:
    Jul 28, 2023
    Member:
    #34443
    Messages:
    45
    Gender:
    Male
    First Name:
    Randy
    West Valley, AZ
    Vehicle:
    2017 SR5
    It has two strips of 3m tape on the back as well as an adhesion promotor to wipe the door with, so it's on there pretty good. I think it would hold up to that, but worst case you could restick it back on. Or maybe put spikes on top of it, like a bird deterrent.

    upload_2024-1-8_13-20-19.png
     
  2. Jan 8, 2024 at 12:58 PM
    Stoney Ranger

    Stoney Ranger Lockers? Pffft

    Joined:
    Mar 19, 2021
    Member:
    #20419
    Messages:
    1,071
    Gender:
    Male
    First Name:
    Dave
    Driftless Area
    Vehicle:
    '18 SR5 Nauti Blue
    4x Rockers/Skids-Dobi-275's-F/R Bpr-Winch-Stickers-ALF
    I didn't use the tape. Only happened once. Passenger thought they broke my door. I told 'em to put it back. I've had them for 3 years now.
     
    ljerr2[QUOTED] likes this.
  3. Jan 8, 2024 at 3:44 PM
    Photon_Chaser

    Photon_Chaser 48576 and counting…

    Joined:
    Sep 4, 2023
    Member:
    #35473
    Messages:
    584
    Gender:
    Male
    First Name:
    Roger
    Sierra Nevada Mountains
    Vehicle:
    21 TRD Pro - "Photon"
    Only used what leftover filament I had but certainly gives thought to color matching the compressor…maybe TRD red?
     
    Yazzman likes this.
  4. Jan 8, 2024 at 5:13 PM
    PrettyGoodSam

    PrettyGoodSam New Member

    Joined:
    Aug 23, 2018
    Member:
    #6853
    Messages:
    802
    Gender:
    Male
    Philadelphia
    Vehicle:
    2012 4Runner Trail
    hit 100k on my 2012 finally haha

    PXL_20240107_163422969.jpg
     
    BX22BR, Toolguy73, Yazzman and 12 others like this.
  5. Jan 8, 2024 at 5:53 PM
    playdixie

    playdixie Missi'ppi Fella

    Joined:
    Apr 19, 2022
    Member:
    #26734
    Messages:
    565
    Gender:
    Male
    First Name:
    Jason
    Missi'ppi
    Vehicle:
    2021 Toyota 4Runner TRD Off Road Premium
    Found this little chunk on Amazon. It's HEAVY.

    Very heavy.

    It's all metal.

    Personally, I like the way it looks. Was very easy to install. You twist put the nut on (not super tight), screw the ball on as tight as you can get so it's oriented correctly correctly, and undo the nut just enough to sit on bottom of the shifter to keep it from rattling and moving. The problem with this item (outside of being heavy) is that if you screw it all way down, it won't orient correctly. But it doesn't rattle with the nut just under it.

    If you are interested:

    https://www.amazon.com/dp/B0CJFJDVJ6?ref=ppx_yo2ov_dt_b_product_details&th=1

    20240107_025403.jpg 20240107_064622.jpg 20240107_201835.jpg 20240107_201857.jpg
     
  6. Jan 8, 2024 at 5:54 PM
    TacoGeeloor

    TacoGeeloor New Member

    Joined:
    Mar 16, 2023
    Member:
    #31809
    Messages:
    113
    Gender:
    Male
    First Name:
    Chad
    Vehicle:
    2023 Lunar Rock TRD Off Road Premium
    I need to do this on my Tacoma which is white. I think it would look great on the lunar rock 4Runner too. How long did this take?
     
  7. Jan 8, 2024 at 7:05 PM
    semprenissart

    semprenissart Mèfi

    Joined:
    Dec 22, 2021
    Member:
    #24758
    Messages:
    905
    Arizona
    Vehicle:
    2022 4Runner TRD Pro (MGM)
    Westcott Sliders. Gobi no rise
    Brought the 4R to the dealership for the free 20k miles service.

    Told them I’m doing the 5 tire rotation as I have a full spare. They did it but when I got home I noticed my spare tire was hanging, almost hitting the ground. Can’t believe they’re not even capable of putting a spare properly! As I grab the tools to fix it, I noticed my wheel lock was missing. Eventually found it on the floor inside the cabin.

    also they suggested changing the cabin air filter. Insane how much they charge for such a simple thing. And I’m surprised they wanted to change it as I replaced it 2 weeks ago so it is really clean!


    IMG_8377.jpg IMG_8362.jpg
     
    Rupp1, raimieb and djwantke like this.
  8. Jan 8, 2024 at 7:14 PM
    broken-giver

    broken-giver BFD

    Joined:
    Apr 14, 2023
    Member:
    #32346
    Messages:
    1,034
    Gender:
    Male
    free isn’t really free. I am not taking their free service, just do it myself or take it to my mechanic I have used for over 10 years.
     
  9. Jan 8, 2024 at 7:22 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,656
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Wow! That's one of the worst I've heard.
    Bunch of hacks.
    Sorry to hear. Happy everything's alright and you weren't really fooled.

    Like I've said a few times here, the dealership is not your friend, ever. That's why it's been coined the stealership.

     
    semprenissart[QUOTED] likes this.
  10. Jan 8, 2024 at 7:23 PM
    Wingman108

    Wingman108 New Member

    Joined:
    Jan 8, 2024
    Member:
    #37791
    Messages:
    1
    Gender:
    Male
    First Name:
    Greg
    Vehicle:
    2023 TRD Off-Road
    Bilstein lift, RCI skids, 33 inch Coopers, RSG sliders
    Interested in your feedback given you clearly take your rig off road. I'm currently lifted roughly 2.5 inches, running the same wheels, with 285/70s and they fit nicely, no rubbing, even flexed off road, but I've been eyeing a set of 285/75s for my next set of tires. I also like the tall skinny look.

    How are the 285/75s fitting with the stock wheels? Do you have a bmc?
     
    djwantke likes this.
  11. Jan 8, 2024 at 7:25 PM
    Rob41

    Rob41 Veteran

    Joined:
    Jun 23, 2023
    Member:
    #33566
    Messages:
    944
    Gender:
    Male
    First Name:
    Rob
    Northern Michigan
    Vehicle:
    2023 Supercharged 4Runner TRD
    Magnuson Supercharger, CSF Performance Radiator, Eibach Pro-Truck Series 2R suspension, SCS Ray10 Bronze Wheels, Pedal Monster, TRD Pro Grill, TRD Pro Roof Rack
    I'd never go to them again for anything. They clearly can't be trusted.
     
  12. Jan 8, 2024 at 7:44 PM
    CHIEF_BLK_NIPS

    CHIEF_BLK_NIPS New Member

    Joined:
    Oct 23, 2022
    Member:
    #29231
    Messages:
    82
    Gender:
    Male
    First Name:
    Steve
    New Jersey
    Vehicle:
    2023 Ice Cap white off road premium 4runner
    Afe momentum cold air intake, fuel shock 17x9 matte bronze wheels with 265-70-17 Cooper discovery AT, xpel ceramic tint double layered on the whole truck plus the windshield is done in 70%. ARK mudflap delete kit, Meso dual color dome lights, solidified rear compartment cover. Molle sunvisor panels, J&L oil catch can TRD pro black valance and grille. Black mirror caps, Camping mod for rear glass, Switch Pros SP9100, Cali Raised ditch light mounts with LASfit LED cubes. Under hood LED light MOD, Compustar drone remote start
    I absolutely love it. Driving at night it is so much easier to see. It’s like the hood disappears. And thank you I also swapped my scooped hood for the flat hood
     
  13. Jan 8, 2024 at 7:44 PM
    Mass4runner

    Mass4runner New Member

    Joined:
    Oct 9, 2018
    Member:
    #7416
    Messages:
    541
    Gender:
    Male
    Vehicle:
    2023 TRD ORP
    I have them and this did happen and it pulled right out. I re-installed with better tape adhesive as the adhesive they come with is close to worthless.
     
    Brett Tech likes this.
  14. Jan 8, 2024 at 7:46 PM
    CHIEF_BLK_NIPS

    CHIEF_BLK_NIPS New Member

    Joined:
    Oct 23, 2022
    Member:
    #29231
    Messages:
    82
    Gender:
    Male
    First Name:
    Steve
    New Jersey
    Vehicle:
    2023 Ice Cap white off road premium 4runner
    Afe momentum cold air intake, fuel shock 17x9 matte bronze wheels with 265-70-17 Cooper discovery AT, xpel ceramic tint double layered on the whole truck plus the windshield is done in 70%. ARK mudflap delete kit, Meso dual color dome lights, solidified rear compartment cover. Molle sunvisor panels, J&L oil catch can TRD pro black valance and grille. Black mirror caps, Camping mod for rear glass, Switch Pros SP9100, Cali Raised ditch light mounts with LASfit LED cubes. Under hood LED light MOD, Compustar drone remote start
    Ahh I did the Avery black satin vinyl in about 25 mins. The Xpel paint protection film takes a little longer. That was about 2 hours then let it sit over night so you can roll the edges. Looks much cleaner
     
  15. Jan 9, 2024 at 6:09 AM
    MusashiSushi

    MusashiSushi New Member

    Joined:
    Jan 5, 2023
    Member:
    #30456
    Messages:
    132
    Gender:
    Male
    First Name:
    Jeff
    Colorado Springs, CO
    Vehicle:
    2023 4Runner SR5 Premium Black/Black
    Elka 2.5 DC 3" lift, SPC UCA's, Toytech rear springs, ARB Diff Breather, RSG Rock Sliders & front Skid. C4 front bumper with High Clearance sides and Warn Winch.
    Nice! I'm not a fan of the hood scoop either, luckily the SR5 doesn't come with it.
     
  16. Jan 9, 2024 at 6:14 AM
    UATahoe

    UATahoe New Member

    Joined:
    Jul 30, 2023
    Member:
    #34477
    Messages:
    179
    Gender:
    Male
    First Name:
    Joseph
    Huntsville, AL
    Vehicle:
    2024 TRD Pro
    Yours was a JBL system or non-JBL?
     
  17. Jan 9, 2024 at 6:23 AM
    bronzestar1

    bronzestar1 New Member

    Joined:
    Jan 5, 2024
    Member:
    #37732
    Messages:
    369
    Gender:
    Male
    Vehicle:
    2023 Limited magnetic gray with redwood interior
    275/55-20s, Airaid CAI, Summit muffler, oil catch can
    I told my daughter, who recently got a '23 TRD ORP, to ignore the "free" scheduled maintenance service intervals and take it in every 5K miles to get the oil changed and tires rotated, even if she has to pay for it. The ones at 10K and 20K should be "free", but the ones in-between she'll have to pay for. It's cheap insurance, one of the very few pro-active maintenance things she can do. I plan on doing the same with my '23 Limited.
     
    Reddawg1100 and 2021venture like this.
  18. Jan 9, 2024 at 6:27 AM
    bronzestar1

    bronzestar1 New Member

    Joined:
    Jan 5, 2024
    Member:
    #37732
    Messages:
    369
    Gender:
    Male
    Vehicle:
    2023 Limited magnetic gray with redwood interior
    275/55-20s, Airaid CAI, Summit muffler, oil catch can
    I have the 15-speaker JBL system in my '23 Limited, and it's not nearly as good as the 14-speaker Bang & Olufsen system that was in my '22 Explorer ST. I'm basing that statement on the volume level and sound quality. With the B&O, I'd rarely have it up higher than 14. With the JBL, I've had to set it as high as 30 to match the level of the B&O that I was used to.
     
  19. Jan 9, 2024 at 7:05 AM
    Borracho Loco

    Borracho Loco My 4Runner identifies as a Prius!

    Joined:
    Sep 23, 2023
    Member:
    #35824
    Messages:
    2,758
    Gender:
    Male
    Dallas/Ft Worth
    Vehicle:
    2023 40th Anniversary Special Edition
    Oooh look, another mod.....
    It's non-JBL, and now it's Pro-Awesome. I love how it sounds.

    Another benefit to installing the AMP to my Trail Grid Pro speakers: The built in mic is A LOT better now. Before when I would call someone using the bluetooth in my truck, the sound/mic quality was shit. People could barely hear me talking to them, or would complain about "wind noise".

    I called someone after the amp was installed (again, using the bluetooth) and the person on the other end said he could hear me loud and clear. No background noise or any other issues. "You sound like you're on the handset and not wireless!"
     
  20. Jan 9, 2024 at 7:18 AM
    MEski4x4

    MEski4x4 New Member

    Joined:
    Jan 5, 2024
    Member:
    #37719
    Messages:
    174
    Gender:
    Male
    Vehicle:
    2024 TRD Pro
    That's disappointing to hear. The B&O in my Raptor is shit, even compared to the alpine system in my Rubicon.
     
  21. Jan 9, 2024 at 7:55 AM
    bronzestar1

    bronzestar1 New Member

    Joined:
    Jan 5, 2024
    Member:
    #37732
    Messages:
    369
    Gender:
    Male
    Vehicle:
    2023 Limited magnetic gray with redwood interior
    275/55-20s, Airaid CAI, Summit muffler, oil catch can
    I had a Gladiator Rubicon, which I think had a factory Alpine system in it. The B&O in the Explorer was still loads better.
     
  22. Jan 9, 2024 at 9:11 AM
    jake long15

    jake long15 Cali Raised LED

    Joined:
    Apr 9, 2016
    Member:
    #1844
    Messages:
    876
    Gender:
    Male
    First Name:
    Jake
    Thanks for choosing us, we are glad your cats are protected!
     
    RusPro17[QUOTED] likes this.
  23. Jan 9, 2024 at 11:48 AM
    Han4Run

    Han4Run New Member

    Joined:
    Nov 30, 2019
    Member:
    #12161
    Messages:
    135
    NY
    Vehicle:
    2019 4Runner Pro
    Installed bolt on panhard correction kit from Dr. Kdss.

    IMG_2034.jpg IMG_2039.jpg
     
  24. Jan 9, 2024 at 1:36 PM
    Mass4runner

    Mass4runner New Member

    Joined:
    Oct 9, 2018
    Member:
    #7416
    Messages:
    541
    Gender:
    Male
    Vehicle:
    2023 TRD ORP
    Just did this super clean console mount for my glass breaker. Doesn’t block anything and no accidentally kicking it onto the ground when it was mounted on the door pocket.IMG_1908.jpg
     
  25. Jan 9, 2024 at 3:04 PM
    Number16

    Number16 New Member

    Joined:
    Feb 24, 2023
    Member:
    #31434
    Messages:
    125
    Gender:
    Male
    Vehicle:
    2021 4runner
    I'd be interested in hearing what you think of them on the Limited. When the time comes I am looking to put a slightly more aggressive tire on my Limited. Any pics directly from the side?
     
  26. Jan 9, 2024 at 4:52 PM
    BMunster234R

    BMunster234R New Member

    Joined:
    Dec 25, 2023
    Member:
    #37484
    Messages:
    113
    Gender:
    Male
    Nothing too crazy...took those boring OEM TRD OffRoad wheels off and put some TRD Pro "GunMetal" wheels on...gonna tint the front 38% to match the rear...and some window guards. Jus' simple stuff...320FAADD-BA06-42E3-9DB6-8D5A390D7BCC.jpg
     
  27. Jan 9, 2024 at 5:48 PM
    Harringbr99

    Harringbr99 New Member

    Joined:
    Jun 9, 2022
    Member:
    #27404
    Messages:
    201
    Gender:
    Male
    First Name:
    Brian
    Kentucky
    Vehicle:
    2021 Barcelona Red Limited
    BudBuilt Skids/Sliders/Hidden Winch, Cornfed 2/1 XREAS lift, Custom Fab Rear Bumper
    Thank you for your service, you help all of us afford brand new 7.5 inch wide rims on E-bay for $550 a 4-pack.

    @Number16 if you are interested in taking your new 4Runner off pavement, might want to check out some OEM TRD OffRoad wheel take-offs from E-BAY. It would open up your tire options so much. Maybe you'll end up with @BMunster234R wheels.
     
    BMunster234R[QUOTED] likes this.
  28. Jan 9, 2024 at 5:52 PM
    BMunster234R

    BMunster234R New Member

    Joined:
    Dec 25, 2023
    Member:
    #37484
    Messages:
    113
    Gender:
    Male
    Heck yeah….sold my set of OEMs for $400 with 60 miles on them…so these TRD Pros only cost me about $700…worked out for both of us!
     
    Han4Run and Harringbr99[QUOTED] like this.
  29. Jan 9, 2024 at 6:02 PM
    ComfortRacing

    ComfortRacing New Member

    Joined:
    Dec 18, 2023
    Member:
    #37348
    Messages:
    25
    Gender:
    Male
    First Name:
    Chad
    Vehicle:
    ‘23 TRD ORP Mag Gray
    None yet only owned for 1 day, but they are coming!
    Don’t judge but….

    I have owned the ‘23 TRD ORP for about 3 weeks now. Wife isn’t happy about the money i spent so quickly so far on it but in the last 3 weeks, I blacked out all the emblems including steering wheel, complete LED upgrade, 2.5” lift, complete weathertech liners, cheesy stuff includes TRD Offroad license plate frames, AJT keyfob and a TEQ grill emblem. I have been waiting almost 5 years to buy a 4R so knew how i wanted it to look and im getting there.
     
  30. Jan 9, 2024 at 6:37 PM
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,656
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Nicely done, that's great to hear! Little custom touches are fun. Your wife sounds like my wife ;)

    What kinda lift ?

    And..
    :worthless:
     
    Last edited: Jan 9, 2024
    Han4Run likes this.

Products Discussed in

To Top