What have you done to your 5th Gen 4Runner today?

Are you running any processor? I had all arc audio in my tundra pro which I sold. I was using the Rockford Fosgate dsr1 for the JBL headunit.

 

Zero fitment issues as the shop that did the install has the ability to 3D print or laser cut brackets etc as needed.

The amp is an 8 channel DSP.
Channels 1 + 2 are the tweeters. 75W to each.
Channels 3+ 4 are bridged to 150W and powers the drivers mid bass
Channels 5+6 are bridged to 150W and powers the passenger mid bass

Channels 7+8 are bridged to supply 550W to a downfiring Kicker Comp RT 10" Sub

Here's a little video during the install:

https://www.instagram.com/tv/C1C7wEEvlkP/?igsh=MTFua3FzbDc1b3BoNA==

 

Where is the sub located? So you are not using the factory location sub area? Did you do sound deadening in the doors?

 

Currently using the Kicker Comp RT 10" downfiring box placed on the floor in the hatch. You can use it like a shelf so I'm not losing any cargo area. Doors are fully treated with sound deadening. I posted a link to the installers Insta with some great shots of the speaker mounts and amp rack.

 

What’s their instagram? To look at pics? I am very familiar with a lot of installs which I have had. Just not sure if I’m going to do the 4runner. My tundra sounded awesome considering it’s the only install I have ever used the factory headunit. All of my installs over the years were using aftermarket headunit,

 

Got my interior Fuse box cover that excepts OEM after adding Pwr takeoff fuse line and the White ( Still on the fence IF I should've gone Cardinal Red?) Cubbies for both areas, put garage door opener in small where I had it laying. Real PITA some times to get to it.( yeah I know, I haven't tried programming ,the rolling security on the TRD overhead option. Never had luck W/Wife's Acura's & never tried on her BMW either). Have 3D, 3M Fangs on the way too. LED's Last night were wicked BRIGHT!! I had LED's in last 4Runner. They weren't as bright though.

 

i messed up and ordered the 2020+ one instead of the 10-19 one so i gotta send it back anyway whomp whomp!

 

just bought KC windshield wire hider, eta 8 days

 

Installed my 100HP mod…. Héritage decal Christmas present from my daughter

 

How do you like your suspension set up?

 

Used just about same set up on my Tacoma just diff length coils (314’s vs 302’s). Planted, great ride. Can’t complain!

 

You in Fullerton?

 

Toyota toilet transport
[ensuite toilet leaking]
heavy sucker

 

Picked her up today

 

Did you just assume its gender?!
Congrats, looks great!

 

-Swapped from K&N 33-2438
(not cleaned and oiled, replaced instead)
To a classic FRAM Extra Guard CA10835
-Swapped cabin air filter to a EPAUTO Cleaner Airflow CP285

 

new Undeground color, nice!!!

 

Yep! I had a Lunar Rock '23 coming in a few weeks after this was announced and decided to switch to Underground

 

Got an alignment done today since I’ll be on the road this weekend. Wasn’t off by much but it handles like a dream now. Hopefully my color matched heritage grille from Thrashed Off-Road will come in next week

 

Seat jackers--kinda nice if you're tall, but don't address the short (back to front) seat bottom.


Rad Rubber splash guards--thick but kinda wish the coverage was better. Best thing is whatever size clips it came with are much tighter than stock, zero rattles. My driver's side rear was not damaged, but I ripped it out as the squeaking clips were driving me nuts.

 

Installed some Greenlane running boards to replace the OEM's

 

God damn, look at that sweet ass color!!

 

Messed with my center caps again. After plasti dipping the silver trim rings I decided it looked better without them so I removed them (filled the little holes they left behind). Then I painted the Toyota symbols with rustoleum plastic paint.

 

Upgraded my first aid kit. Big one for back country and smaller one for highway trips.

Much better organized and easy to find what I need than old kit.

 

Ordered some Greenlane slider/steps. 15% off + free shipping.

 

Looks good...I like their stuff a lot.
I'll be ordering their roof rack and ladder soon.

 

They make a good quality product, plus they package their products really well to avoid damage during transport.
I have their ladder in the garage, maybe I’ll install this week and throw up some pics

 

Victory4x4 upper/lower molle panels, upper shelf, and metal floor installed. It was a good Christmas also threw in those back seat protectors a few weeks back.



In addition to all the mounting options, this all helps make the back pretty dog proof for my 90lb lab. Next up is assembling/bolting down a stack of their 1 x 10” and 2 x 5” drawers on the driver side.

Btw Victory’s customer service is excellent. Received the wrong side tie down hook bracket for the passenger side and they immediately got back to me about shipping a replacement. In the meantime, to get these bolted up for our trip on the 1st, I impatiently couldn’t resist got the job done for now.



My RuffRugs order for the full cargo + hatch panel liner also wasn’t going to arrive in time for our trip. Luckily found a bunch of extra puzzle mats in my attic (from covid time sketchy garage BJJ training lol). This plus some thick blankets should temporarily do the trick containing the dog hiking mess for the week.



After getting the cabinets bolted in, I plan to have the RuffRugs liner cut/stitched by a local upholstery shop to fit around the cabinets.

 

Remote start day

 

That Victory 4x4 metal cargo floor is DROP DEAD SEXY! But OY!, pricey.