What have you done to your 5th Gen 4Runner today?

This one is $5 cheaper: https://www.etsy.com/listing/914635...s&ref=landingpage_similar_listing_top-1&frs=1

 

Yeah I saw that one I like using the OEM $5 more is worth it to me. It's your $ buy what YOU like/want

 

We had to eat our breakfast on the go today, my wife snapped this picture before our last minute Christmas shopping.

Hope everyone has a safe and happy holiday.

Merry christmas

 

Went in to fix a leaky tire, left with a $$$ spare 285 on the factory steelie. I'll pick up a TRD wheel when it's time to rotate them.

 

Well received my Cali Raised interior Molly with upper shelf.. Love it and I like how CR is the only ones that extend all the way down.. Great product! Now I just need to buy more stuff to attach to it!! LOL. It NEVER stops!! LOL

 

I'm told it's pretty much the biggest that will (285/70 R17).



Front seat covers showed up; I'll give Marathon a slight nod over Coverking (rears) for fit. I should have got the "large" front pocket though, the small is really shallow.

 

Not something I did but something I just noticed / overlooked.
4Runner is port injection only. I overlooked the specs talking about direct ignition.

 

Yep, those lights are badass
Haven't seen em, thanks for this

 

Nice!!
So you fixed a running tire flat, then swapped to a 285 on the steely?
I had a local little shop slap a FB marketplace load e 285 (Kumho) on my steely.
I've had a heck of a hard time confirming the width and exact weight of my '16 Trail steely.

Mickey Thompson Baja ATX load E 55.6lbs
Mickey Thompson Sidebiter II 29lbs
Road Venture AT51 load E 55.6lbs
‘16 Trail Toyota 17” steely spare:
Width 7” or 7.5”?
Weight ???lbs

 

Got my LED's for Interior/Puddle/License Plate lights. Gonna do that tomorrow. Not sure if I'll do license plate ,no big woo just 4 screws so see how the mood goes.

 

(last weekend)rebuilt/reattached bedslider, now it is tied into the front and rear (rear) seat mounting points. installed packout bases from work van and added a 3/4" strip of horse mat to the center to slide in a 6' ladder as needed. also replaced the existing 3/4" plywood under back half of bedslider with another piece of 3/4" horse mat...way, way better! bedslider unloaded or loaded is dead silent in all traffic conditions.

(this weekend) I finally installed my rocksliders. these were designed and built for the maine woods use by me and a friend of mine from recycled industrial 50kw generator 5/16" steel shipping 'U' brackets. they are super heavy and tied into the 13 (26 total) factory frame bolts on each side of the 4runner with a one piece 1/4" steel mounting flange . they are 100% open faced so no square/round tube to rot out in the future. besides being free steel stock, I overbuilt to be able to pull my 4runnner sideways if needed and 180 degrees which I had to do once while 4wheeling in a jeep on a hill in 6 inches of mud with a come-along.

 

Sev3n Sparta. The 2nd E is backwards in the name. Maybe Russian

 

The product is 1st rate, connectors hermetically sealed, harness is Grade A standard as far as I'm concerned being a Professional A/C tech for too many yrs as I'm old!!

 

Damn I love that. Couple of questions. About how much usable clearance does the top shelf have above it? How difficult was the install? Did you find a useful YouTube video you can link? TIA

 

bought a 3/4" galvanized d ring on the hitch skid for show

 

Brandy old fashioned???

 

That'd be cool
No it was a girly man cosmopolitan w/ tito's

 

These are fantastic, if you don't wanna just replace the bulbs.

https://www.4runnerlifestyle.com/co...ts/4runner-lifestyle-led-license-plate-lights

 

I got those too. And on black Friday they were like 10$. And they even brighten up enough for better vision on the reverse camera

 

https://www.ebay.com/itm/364058247855

I was going order these for winter wheels. The offset and width is the same as trdor wheels. The vendor told me the shipping weight is 30lbs each.

 

Ordered some meso map and dome dual lights.

 

Here's my fitting Toyo OC 285s to my 4runner and trimming without removing the bumper video. Sharing if it helps anyone...
(Sorry if I talk too much. I had no preplan/ script. Just talking what came to my head)

https://youtu.be/2UdmP59Mm4o

 

Finished my BMC on the passenger side, pressure washed the under side, lubed drive line, added back my 1.5" wheel spacers with blue lock tight, repainted rims with black plasti dip, and sort of fixed a slipping upper ball joint boot (zip tied).

 

Just installed them 2 days ago, you're gonna love em

 

For the price I better!

 

Ordered this on Amazon, $40 fits like a glove.
Only wish that it had something to pull the front flap tight up against the front part (back of leg) section so it would wrap almost under the seat basically. But with two kid seats in there it holds it down pretty good. It’s the ‘Universal Fit’ one if anyone is looking at ordering as they have 3 sizes.

ANOSOSPECIAL Dog Car Seat Cover for Back Seat Cover for Kids,Non Stick Fur Rear Seat Protector for Pet,Nonslip Waterproof Durable Universal Fit Interior Backseat Covers for Auto Van SUV https://a.co/d/eBbnZDm

 

Installed my Christmas gift to myself, a new Toyota OEM TRD Pro black valence to replace the silver one it came with. Not to difficult of a job really, did the diff/e-locker breather relocate at the same time after dropping the spare tire down. Stood back and looked at it and said “Ho ho ho, Merry Christmas!”

 

Thanks for this dude @hossler1788
Merry Christmas
Interesting!

of course they don't ship to Canada, why would they right

 

Did the LED install except the License plate lights. Couldn't get the one out & said efff it, didn't want to break anything & not too worried about them Will try them out tomorrow night after day @ step sons.
The D/S vanity bulb popped out of my hemostat & is in the head liner, hopefully I won't hear it rattle around if so Have to pull that down some time. These LED's are polar sensitive. I got lucky on a couple then 1 didn't work, thought it was bad. then when I did 1 of the door it didn't work so I flipped 180 viola!