1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Post your tools!

Discussion in 'Off-Topic Discussion' started by wnelax04sr5, Jul 28, 2014.

  1. Jul 28, 2014 at 5:09 PM
    #1
    wnelax04sr5

    wnelax04sr5 [OP] New Member

    Joined:
    Apr 6, 2014
    Member:
    #12
    Messages:
    2,577
    Gender:
    Male
    First Name:
    Ethan
    CT
    Vehicle:
    2004 SR5 4X4 Galactic Gray
    I've always been curious to see what people have in the garage, or no garage, to work on their 4runners/other vehicles.

    This is the place to post up what you've got, want to have, or used to have.

    Ill start.

    Craftsman everything, except the drill.

    Full rollaway
    IMG_20140728_195339_821.jpg

    33 gallon vertical air compressor
    IMG_20140728_195411_191.jpg

    air tools/impact sockets/spring compressors
    IMG_20140728_195422_076.jpg

    3/8 sockets and 1/4 sockets with ratchets
    IMG_20140728_195428_799.jpg

    assorted pliers/cutters and dewalt 20v max drill
    IMG_20140728_195435_147.jpg

    1/2 ratchet and sockets and more 3/8 sockets
    IMG_20140728_195441_077.jpg

    wrenches and hammer
    IMG_20140728_195506_166.jpg

    screwdrivers, allen wrenches, drivers, and obII scanner
    IMG_20140728_195511_749.jpg

    for comparison, my fathers rollaway
    IMG_20140728_195526_531.jpg

    the wrench collection

    IMG_20140728_195533_729.jpg
     
    Last edited: Jul 30, 2014
  2. Jul 29, 2014 at 10:46 AM
    #2
    Bob

    Bob Member Staff Member

    Joined:
    Apr 3, 2014
    Member:
    #1
    Messages:
    2,251
    First Name:
    Bob
    SoCal
    nice set!

    speaking of craftsman, sears online tends have some good sales every now and then on craftsman tools and boxes
     
  3. Jul 29, 2014 at 6:00 PM
    #3
    wnelax04sr5

    wnelax04sr5 [OP] New Member

    Joined:
    Apr 6, 2014
    Member:
    #12
    Messages:
    2,577
    Gender:
    Male
    First Name:
    Ethan
    CT
    Vehicle:
    2004 SR5 4X4 Galactic Gray
    thats usually how i pick my stuff up, I'm a sucker for sales
     
  4. Jul 29, 2014 at 11:19 PM
    #4
    slowpoke99

    slowpoke99 New Member

    Joined:
    Jun 10, 2014
    Member:
    #167
    Messages:
    37
    Gender:
    Male
    First Name:
    Mark
    Vehicle:
    99 4Runner SR5
    sas, locked, longfields, dual cased
    Ok I'll play. This is my box of hand tools that I keep in my shop at home. Kind of a mixed breed of everything from snap on, Mac, craftsman and matco.
    image.jpg
    60gal compressor
    image.jpg
    Mac box on the left, old snapon on the right with misc tools. Cabinets and wall have spare parts and supplies.
    image.jpg
    Work bench and shelves stocked with extra fluids.
    image.jpg
    Other shelf with diff parts
    image.jpg
    Portable welding table with notcher and vise mounted.
    image.jpg
    Not shown is my bender and hydraulic press. Also have another box that lives in my shop at work with my miller 251 mig w/30a spool gun for welding aluminum. Next on the menu is tig welder and plasma cutter.
     
    5six, djb1, RonT4R and 1 other person like this.
  5. Jul 20, 2023 at 8:16 AM
    #5
    Lou

    Lou New Member

    Joined:
    Oct 4, 2021
    Member:
    #23651
    Messages:
    192
    Vehicle:
    2021 TRD Off Road Premium
    This thread makes me want to reorganize my garage.
     
  6. Jul 20, 2023 at 8:20 AM
    #6
    Jynarik

    Jynarik I like boobies

    Joined:
    Jul 10, 2019
    Member:
    #10510
    Messages:
    2,318
    Gender:
    Male
    Austin Texas
    Vehicle:
    2019 trd pro voodoo
  7. Jul 20, 2023 at 8:30 AM
    #7
    RumHamRunner73

    RumHamRunner73 Dead on with a zero

    Joined:
    Nov 24, 2022
    Member:
    #29771
    Messages:
    2,759
    Gender:
    Male
    First Name:
    Philip
    Oakboro, N.C
    Vehicle:
    2022 4 Runner Limited. Blizzard Pearl
    IMG_20220303_155247.jpg

    IMG_20230720_113252.jpg
    IMG_20230720_113215.jpg
    IMG_20230720_113121.jpg


    Retired Technician
     
    Last edited: Jul 20, 2023
    Toolguy73, Thacrow, CygnusX-4 and 3 others like this.
  8. Jul 20, 2023 at 9:24 AM
    #8
    dgtulsaguy

    dgtulsaguy Rocklanding Jedi Master equivalent

    Joined:
    Mar 4, 2022
    Member:
    #25942
    Messages:
    95
    Vehicle:
    22 MGM ORP long travel
    I use the Boxo tool roll plus a small Dewalt box full of stuff that fits perfect behind the passenger seat for trail repairs
    20230628_075954.jpg
     
    Thacrow likes this.
  9. Jul 27, 2023 at 8:36 PM
    #9
    Thacrow

    Thacrow New Member

    Joined:
    May 30, 2021
    Member:
    #21719
    Messages:
    1,452
    Gender:
    Male
    NorCal
    Vehicle:
    2021 ORP
    Speed holes
    I frequently get asked if I have OCD for how organized I keep my garage.

    20230630_194550.jpg
     
  10. Jul 28, 2023 at 1:40 PM
    #10
    LadeDruck

    LadeDruck New Member

    Joined:
    Feb 28, 2023
    Member:
    #31501
    Messages:
    278
    Vehicle:
    2022 Pearl Effect White Ltd.
    damn you didn’t announce your swag

     
  11. Jul 28, 2023 at 1:48 PM
    #11
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,444
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    garage. pretty new to automotive. self teaching how to wrench.

    IMG_20230617_134913427_HDR.jpg
    IMG_20230526_203133171.jpg
    IMG_20230526_203050381_HDR.jpg
    IMG_20230526_203437306_HDR.jpg
     
  12. Jul 28, 2023 at 2:23 PM
    #12
    Dillusion

    Dillusion Resident A**h***

    Joined:
    Dec 10, 2018
    Member:
    #7998
    Messages:
    3,071
    Gender:
    Male
    First Name:
    Kyle
    Island in the Middle of the Ocean
    Vehicle:
    2018 TRD OR
    My shit is a mess. Half my tools on/in the chest some on the rolling cart.

    Some on the table.
     
    Ricphoto and Thatbassguy like this.
  13. Jul 28, 2023 at 7:11 PM
    #13
    MI-FL off roader

    MI-FL off roader T4R Hobby/Addict

    Joined:
    Aug 21, 2015
    Member:
    #878
    Messages:
    1,426
    Gender:
    Male
    First Name:
    Brett
    Merritt Island, FL
    Vehicle:
    03' SR5 Sport - 12' Limited
    Too many mods and too much money
    Some I can't find at all....
     
    Thatbassguy likes this.
  14. Jul 28, 2023 at 7:14 PM
    #14
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,607
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    Uhhh...

    Uhhh... Definitely looks like a man's garage. But, organized, lol??
     
    CygnusX-4 likes this.
  15. Jul 28, 2023 at 7:25 PM
    #15
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,607
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    Old pic, but a nice representation of my Milwaukee tool collection a few years ago.

    20180505_154657_HDR.jpg
     
    LadeDruck, CygnusX-4, Thacrow and 2 others like this.
  16. Jul 28, 2023 at 7:28 PM
    #16
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,444
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    yowza!
     
    Thatbassguy likes this.
  17. Jul 28, 2023 at 7:31 PM
    #17
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,607
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    More recent pic, but there are things missing.

    PXL_20221110_222934533~2.jpg
     
    5six, Bodie the Dog, Thacrow and 3 others like this.
  18. Jul 28, 2023 at 7:49 PM
    #18
    Gharddog03

    Gharddog03 New Member

    Joined:
    Dec 11, 2022
    Member:
    #30041
    Messages:
    166
    Gender:
    Male
    Fresno CA
    Vehicle:
    2021 TRD PRO Lunar
    :headbang:
     
    Thatbassguy[QUOTED] likes this.
  19. Jul 28, 2023 at 8:34 PM
    #19
    Thacrow

    Thacrow New Member

    Joined:
    May 30, 2021
    Member:
    #21719
    Messages:
    1,452
    Gender:
    Male
    NorCal
    Vehicle:
    2021 ORP
    Speed holes
    I like what you got going on there. Thats a lot of red!
     
    Last edited: Jul 28, 2023
    Thatbassguy[QUOTED] likes this.
  20. Jul 28, 2023 at 9:01 PM
    #20
    CygnusX-4

    CygnusX-4 Member

    Joined:
    Feb 26, 2023
    Member:
    #31476
    Messages:
    175
    Vehicle:
    21 TRD OR
    Lol, I just want to see what's in the safe...:D
     
  21. Jul 29, 2023 at 3:08 AM
    #21
    broken-giver

    broken-giver BFD

    Joined:
    Apr 14, 2023
    Member:
    #32346
    Messages:
    999
    Gender:
    Male
    This is too good. I am ashamed to show mine now. It’s quite small collection :p
     
  22. Jul 29, 2023 at 3:35 AM
    #22
    2018 Limited

    2018 Limited New Member

    Joined:
    May 15, 2022
    Member:
    #27075
    Messages:
    519
    Gender:
    Male
    First Name:
    BDR
    Vehicle:
    2018 Limited
    For a second I thought someone broke into my garage and snapped a photo. Ha ha. But I know where everything is. Mostly.
     
    Thacrow[QUOTED] likes this.
  23. Jul 29, 2023 at 3:16 PM
    #23
    Captain Spalding

    Captain Spalding . . .

    Joined:
    Feb 4, 2022
    Member:
    #25492
    Messages:
    2,010
    I had a boss once who was totally OCD and had a big rollaway full of tools without a mark on them. It’s not that he never used them. We all know guys like that. No, he used them but just kept them perfect. Inside the drawers everything was perfectly arranged in neat rows in descending order. On top of the rollaway there were three plastic boxes. A tap and die set, a hole saw set, and a small box with dial calipers in it. These were all stacked in a pyramid and perfectly centered atop the rollaway. His fastidiousness extended to all operations within the shop. Spray paint cans had to be returned to the shelf with the proper colored caps, and in order of the color spectrum. The table saw had to be vacuumed clean inside and out at the end of every day. It went on and on.

    This compulsiveness used to drive one of my coworkers nuts. He took to opening a drawer in the boss’s rollaway and then slamming it closed so that all the tools inside would slide to the back of the drawer in a chaotic jumble. We never saw him do it, but the drawer had always been magically restored to perfection the next time we looked.

    I had my own passive aggressive contribution. It took place over weeks. I would move the smallest box on the pyramid off-center an inch. The next time I walked by it was perfectly centered again. A few days later I’d move it off center by ⅞ of an inch. And on it went, with me moving the box an incrementally smaller distance every few days, and the micrometer box always being mysteriously re-centered without anyone seeing. It wasn’t until it got down to a quarter inch that he failed to correct it.

    He never confronted us about our light hearted pranks. I think he knew he had a problem and was embarrassed.
     
    Last edited: Jul 29, 2023
    djwantke likes this.
  24. Jul 29, 2023 at 3:20 PM
    #24
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,444
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Sounds like a weirdo Virgo like me baha
     
  25. Jul 29, 2023 at 3:58 PM
    #25
    RumHamRunner73

    RumHamRunner73 Dead on with a zero

    Joined:
    Nov 24, 2022
    Member:
    #29771
    Messages:
    2,759
    Gender:
    Male
    First Name:
    Philip
    Oakboro, N.C
    Vehicle:
    2022 4 Runner Limited. Blizzard Pearl
    Can never actually have too many tools can we?
     
    djwantke likes this.
  26. Jul 29, 2023 at 4:01 PM
    #26
    Thacrow

    Thacrow New Member

    Joined:
    May 30, 2021
    Member:
    #21719
    Messages:
    1,452
    Gender:
    Male
    NorCal
    Vehicle:
    2021 ORP
    Speed holes
    Sounds like you were describing my garage for sure.
     
  27. Jul 29, 2023 at 4:04 PM
    #27
    2018 Limited

    2018 Limited New Member

    Joined:
    May 15, 2022
    Member:
    #27075
    Messages:
    519
    Gender:
    Male
    First Name:
    BDR
    Vehicle:
    2018 Limited
    Funny. Reminds me of my father in law. I used a squirt of WD 40 off the shelf where my father in law had 20 different cans between oil, paints wd40 carb cleaners etc. I knowing the way he is I made certain to put it back label out wiped clean exactly where he had it. At dinner that night he asks “ what did you need wd40 for?” That was his way of letting me know he knows everything.
     
    Thatbassguy and SlvrSlug like this.
  28. Jul 29, 2023 at 4:40 PM
    #28
    backpacker

    backpacker New Member

    Joined:
    Apr 22, 2023
    Member:
    #32515
    Messages:
    2,187
    Gender:
    Male
    Vehicle:
    2023 TRD ORP
    RSG sliders, Falken Wildpeak 265/70R/17 E
    I confess to having bought a duplicate tool because I had to move too much stuff get at the one I already had. Then there's workshop tools vs. garage tools vs. tools in the car, and who can forget the tools that my wife is allowed to use? Now she has all her own.
     
    qcTRDct and Thatbassguy like this.
  29. Jul 29, 2023 at 4:55 PM
    #29
    RumHamRunner73

    RumHamRunner73 Dead on with a zero

    Joined:
    Nov 24, 2022
    Member:
    #29771
    Messages:
    2,759
    Gender:
    Male
    First Name:
    Philip
    Oakboro, N.C
    Vehicle:
    2022 4 Runner Limited. Blizzard Pearl
    Good old saying, One is none and two is one. Gotta have multiples,

    Cost me a bunch of money over the years building tool kits for motorcycles, 4 wheelers, race cars and motor homes.

    Well at least they cant take em away.
     
    Thatbassguy likes this.
  30. Jul 29, 2023 at 5:31 PM
    #30
    2018 Limited

    2018 Limited New Member

    Joined:
    May 15, 2022
    Member:
    #27075
    Messages:
    519
    Gender:
    Male
    First Name:
    BDR
    Vehicle:
    2018 Limited
    My father has 6 of everything.
     

Products Discussed in

To Top