What have you done to your 5th Gen 4Runner today?

Since I'm waiting for Magnuson to fix my VR tuner, I managed to install the Morimoto XB head lights. Unfortunately they sent me the wrong harness so I have no actual low or high beams......for now. Got a rush on the correct harnesses.

Anyway, this looks cool

https://www.youtube.com/watch?v=uENsvEIZ42c

 

Sick house (and Runner)

 

Thanks! Almost 100 years old and we just had to replace the AC with this Oklahoma summer!

 

Is that right eh!? I love brick

 

2in front leveling installed. 275s. That's it for suspension until next yr when switching to a full lift setup.

Side note, what's are you guys running tire psi at with no added gear, I think I'm at 37, I need to chalk test and see how it comes out

 

34-35 maybe. Too high and you can experience some unusually rough driving, perhaps uneven tire wear

 

I finally ended the feud with my rearview mirror falling off every summer when it gets 100°+ outside. Ended up making a metal bracket outta some 1/8" x 1" flat bar aluminum, bent it into shape, bolted it to the metal bracket that holds the map light assembly in place, then put some 3M foam adhesive in between the aluminum mount and the windshield so it doesn't rattle.

Victory.

I despise that stupid little bastard metal button mount.

 

You might wear the center of your tires in the rear with 37 psi and no load. But run it and let us know I'm pretty curious.

I used to run 36 psi on an eclipse, center of the tire wore faster front and back.

 

Thanks. The Amazon page has the dimensions, I have some aluminum stock that I can bend the same way.

Much appreciated,
Mike

 

When there is a redneck will, there is a redneck way.

Or as the old saying: Necessity is the mother of invention.

Take your pick, but I like it.

 

Filled up for the first time. $46.00. Only $13.00 more a fill up from a 1/4 tank VS my old car. I think it might bankrupt me. 255 miles of the normal break in procedure following the manual. I love the truck so far and have no complaints with it.

 

Where do you live? I wish i could spend $46 per fill up. Anything close to $60-70 and I’m happy. When I first got mine in 22, gas was insanely expensive and all my fill ups were above $100. Gas use to be A LOT cheaper in Phoenix 10 years ago, but AZ is turning into CA unfortunately

 

Missouri. Was $3.32 a gallon at Sam's Club. I was also at 1/4 of a tank,13.9 gallons. Would have been more if I was lower, but not going to stress out the fuel pump.

 

Hahah, amen brother! Gotta do what you gotta do. When you're poor you gotta get creative sometimes

 

Completely unrelated to T4R, but I was watching YT vids on my lunch break (going down a rabbit hole lol), and stumbled on this. One helluva way to make a potato peeler.

(Going back on the "necessity is the mother of invention" idea.)

https://www.youtube.com/watch?v=4l9hyO83IrU

 

My local BBQ place has a drill bit that does the same thing, but slices it a bit thinner. Similar to this, but not exactly the same. Either way, that's pretty neat if you have a lot of spare time.

 

Fluf post,lol. I put this 3M scoop wrap on today. Also added the supercharged emblems. I know, I have a mix of "Pro" and "Off Road" stuff....and I'm good with that

 

My fill up from last night just north of Atlanta, Ga.

 

Pushing an empty tank I see.

 

I have a Rubbermaid Action Packer storage box in the back of my 22 ORP. There is also a cargo mat that the box sits on. Every time I turn a corner or go through a curve, the thing slides around. Very annoying. I first tried bungee cords but that did not work. Now, problem solved.

I ordered rubberized magnets from Amazon. I drilled holes in the bottom of the box at each corner and bolted the magnets to the box. I thought I would have to somehow attach steel washers to the cargo mat but between the magnets being rubber and the weight of the box when loaded is enough to keep it stationary when making a turn or going through a curve. I love it when a problem can be solved for $13.99.

 

If you’re putting 14 gallons of gas you’re nowhere near stressing the fuel pump.

 

I'll stick to the 1/4 tank rule of thumb. Yeah I can go lower, but I'll play it safe.

 

You do you but you should read this as well. Interesting stuff

What have you done to your 5th Gen 4Runner today?

 

fuel light is my totem.

 

Installed some grill light on my TRD Pro

 

Dude... That is awesome. Almost everything you'd just have laying around in a shop too. He even went all out on the handle too, that was cool.

Half the fun of owning a truck is making cool custom parts & solutions out of what most people consider scrap. Or I see some kind of mod for sale and think "I can make a better one for like 1/4 the cost".

 

Those magnets are awesome, I actually picked up one to make a walkie talkie mount for my truck. Haven't finished it yet but those magnets can be used for a ton of things. Nice ingenuity there man!

 

Where did you get this?

 

where did you end up buying the new head unit from? All the ones I find are more expensive than all the aftermarket options.

 

I think it's this: https://solidifi3dllc.myshopify.com/collections/all

I don't have one myself, but I saved the link when I saw it a while back.