1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

What wheel offset and width to fit 285 Cooper Discoverers with little to no rub?

Discussion in 'Suspension' started by KCN896130, Jan 28, 2023.

  1. Jan 28, 2023 at 1:39 PM
    #1
    KCN896130

    #1
    KCN896130 [OP] New Member

    Joined:
    Jan 28, 2023
    Member:
    #30937
    Messages:
    2
    Vehicle:
    23 4runner TRD Offroad
    Seen too many threads about this but just want a straight answer. Installing a Billstein 6112/5160 lift. 2.3” front, clip at #7/#5 rear 1.5. OME UCA’s. What wheel offset and width do i need to buy to fit 285 cooper discoverers with little to no rub? 17” wheel in mind.
     
    Last edited: Jan 28, 2023
    KCN896130, Jan 28, 2023
    #1
    kirtap likes this.
  2. Jul 13, 2023 at 10:27 AM
    #2
    kirtap

    #2
    kirtap New Member

    Joined:
    Jul 13, 2023
    Member:
    #33905
    Messages:
    1
    Gender:
    Male
    Vehicle:
    2017 Black 4Runner
    17" Bronze Method 703s Alpharex Luxx
    Were you ever able to get an answer for this? I'm attempting a very similar setup with Dobinson IMS 2.5" front 1.75" rear lift. I currently have -12 offset Method 703s.
     
    kirtap, Jul 13, 2023
    #2
  3. Jul 13, 2023 at 10:36 AM
    #3
    Captain Sensible

    #3
    Captain Sensible New Member

    Joined:
    Apr 26, 2023
    Member:
    #32587
    Messages:
    203
    Gender:
    Male
    I have the stock pro rims and 285's with no rub at full lock. (3" lift) Now, on my taco it was the same BUT when I went Method's it rubbed and I believe that was the -12 but not 100% on that.
     
    Captain Sensible, Jul 13, 2023
    #3
    kirtap likes this.
  4. Jul 13, 2023 at 10:58 AM
    #4
    KCN896130

    #4
    KCN896130 [OP] New Member

    Joined:
    Jan 28, 2023
    Member:
    #30937
    Messages:
    2
    Vehicle:
    23 4runner TRD Offroad
    Yes i found my setup. Im running SCS 17x8.5 -12 offset. OME uca’s with the caster set to push the wheel a tad bit fwd in the wheel well during my alignment. I had to trim the fwd side of the fender just a bit and push the fender liner out of the way with a hear gun but no body mount rub
     
    KCN896130, Jul 13, 2023
    #4
Register FREE to Reply!

Products Discussed in

Eibach Pro-Truck Lift System
$826.47+
To Top