Old school locking hubs question?

Hello Everybody,
I am in the process of resurrecting a 92. It's got the 3.0 engine. I does not have the old style locking hubs, is it possible to rebuild it with old school locking hubs? How hard can it be?What do i need to do. I would appreciate any knowledge from all my fellow enthusiast.

 

Easy. If you can find a functional set of Aisin locking hubs, you will just need a set of pyramid washers and nuts. I did this many moons ago on my 94. I'll see if I can find a schematic for you

 

https://cruiserteq.com/front-axle-a...ont-axle-applications-pack-of-6-hub6997kaset/

This should be the hardware set you'll need. I think the studs replace normal bolts that holt the auto hubs on, and the manual hubs just slip on, then cone washers, lock washers, and nuts. Also get new gaskets before installing them. There's a paper gasket that goes in n the back side of the hub.

 

You will love them, wish there were some for the 5th gen.

 

I miss the locking hubs and the shift lever on my SR5 Premium. Wish it had them!

 

These would clean up.
https://www.ebay.com/itm/1986-1995-...967b60df119804dd503c5e7b6ab40&redirect=mobile