1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

First fake TRD Pro I have seen in the wild

Discussion in '5th Gen 4Runners (2010-2024)' started by Trail Addict, Jun 4, 2022.

  1. May 2, 2023 at 8:20 PM
    #181
    4R777

    4R777 New Member

    Joined:
    Dec 18, 2018
    Member:
    #8099
    Messages:
    1,039
    Also a good reason. And I also don't care to advertise that I've got a pro model or anything special. The C pillars look so clean without badging.
     
  2. May 2, 2023 at 8:25 PM
    #182
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,625
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    I need to look at some pictures of de-badged ones. I think they're just on with 2-sided tape. I suppose I can always put them back on if I want.
     
    Mickeyblue and Steely123 like this.
  3. May 2, 2023 at 8:38 PM
    #183
    4R777

    4R777 New Member

    Joined:
    Dec 18, 2018
    Member:
    #8099
    Messages:
    1,039
    Thatbassguy[QUOTED] likes this.
  4. May 3, 2023 at 3:35 AM
    #184
    Steely123

    Steely123 What's the new trend? I'll do it!

    Joined:
    Jun 4, 2022
    Member:
    #27323
    Messages:
    3,354
    Gender:
    Male
    TX
    Vehicle:
    2018 4runner SR5 premium
    Took mine of with a heat gun and dental floss. Microfiber towel wipes of residue pretty good.

    IMG_1596.jpg
     
  5. May 3, 2023 at 4:26 AM
    #185
    dgrenier15

    dgrenier15 New Member

    Joined:
    Feb 27, 2023
    Member:
    #31489
    Messages:
    287
    Gender:
    Male
    First Name:
    Dayne
    Oklahoma
    Vehicle:
    2022 AG TRD ORP
    First time seeing this rare unicorn! A Toyota Bronco!!!

    IMG_7500.jpg
     
  6. May 3, 2023 at 4:28 AM
    #186
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,625
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    Ahh, the rare "Bronco" edition. :rofl:

    That's the opposite of de-badged right there.
     
    kolter45 and nimby like this.
  7. May 3, 2023 at 4:36 AM
    #187
    Beachguy

    Beachguy Normal turned up too loud

    Joined:
    Feb 18, 2021
    Member:
    #19847
    Messages:
    4,239
    Gender:
    Male
    First Name:
    Robert
    Texas
    Vehicle:
    2024 TRP ORP
    Cross breeding. They do things a little different in Oklahoma.
     
    nimby, Steely123 and Thatbassguy like this.
  8. May 3, 2023 at 6:14 AM
    #188
    Mickeyblue

    Mickeyblue New Member

    Joined:
    Sep 20, 2022
    Member:
    #28749
    Messages:
    84
    Gender:
    Female
    Vehicle:
    2022 TRD ORP
    I took mine off with dental floss (not Glide) and a hair dryer. Then alcohol . on a cotton pad took off the leftover sticky. I put the badges in a ziploc and stored them in case I feel the need to put them back on. My truck is silver, but when I took them off the paint was perfect, as if they were never there. I’ve had my truck for almost a year and a half.

    I de-badged it and then put a decal on the front hood scoop to help with the glare, and bought the one with TRD Off Road on it. I like the red lettering on the black decal. If I’d left the badges on, I feel like it would have been too much.

    if you do remove them, take a picture so that if you change your mind, you know exactly where yours were.
     
    Thatbassguy[QUOTED] likes this.
  9. May 3, 2023 at 6:21 AM
    #189
    Texrun50

    Texrun50 New Member

    Joined:
    Mar 21, 2023
    Member:
    #31862
    Messages:
    52
    Gender:
    Male
    Vehicle:
    2023 TRD ORP - Silver, Factory Off-Road Upgrade Package (black TRD wheels,sliders, etc.)
    None
    Wait…is that Toyota? I can’t tell.

    Also, airbrushed horses on the side? You know this is the guy that walks into a party with some Wild Turkey 101 and the cops are called 17 minutes later.
     
  10. May 3, 2023 at 6:27 AM
    #190
    glwood54

    glwood54 Stop making me buy stuff!

    Joined:
    Aug 19, 2019
    Member:
    #10964
    Messages:
    6,575
    Gender:
    Male
    First Name:
    Gary
    Albuquerque, NM
    Vehicle:
    2019 OR, KDSS, RSG sliders, Eibach shocks, 265/70 Falken Wildpeaks
    Looks like my 2003 Prerunner. I put Bilstein 4600s on mine and am happy with the ride.
     
  11. May 3, 2023 at 6:29 AM
    #191
    dgrenier15

    dgrenier15 New Member

    Joined:
    Feb 27, 2023
    Member:
    #31489
    Messages:
    287
    Gender:
    Male
    First Name:
    Dayne
    Oklahoma
    Vehicle:
    2022 AG TRD ORP
    Yeah they say the lead time is about 9 months for this package.
     
  12. May 3, 2023 at 6:48 AM
    #192
    MAWDAWG

    MAWDAWG New Member

    Joined:
    Mar 18, 2023
    Member:
    #31828
    Messages:
    99
    Gender:
    Male
    First Name:
    mark
    Vehicle:
    2023 4Runner TRD ORP
    i have Pro wheels and i wrapped the bumpers black because it looks better, just trying to make it look better not trying to turn it into a Pro...
    i agree with Accelerator 100% - the build up is fine - the badging makes it stupid
     
  13. May 3, 2023 at 6:58 AM
    #193
    glwood54

    glwood54 Stop making me buy stuff!

    Joined:
    Aug 19, 2019
    Member:
    #10964
    Messages:
    6,575
    Gender:
    Male
    First Name:
    Gary
    Albuquerque, NM
    Vehicle:
    2019 OR, KDSS, RSG sliders, Eibach shocks, 265/70 Falken Wildpeaks
    If you didn't care whether people had whatever badges, why should you care if they didn't use their 4R the same way you do?
     
    Cowboy59 and Thatbassguy like this.
  14. May 3, 2023 at 7:20 AM
    #194
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,625
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    It's like when people whine about others who keep their traction boards on the roof all the time. Mine live up there all summer, usually. Why should I take them off just to put them back on in a few weeks? :rolleyes:
     
  15. May 3, 2023 at 7:35 AM
    #195
    ElectroBoy

    ElectroBoy Ad astra

    Joined:
    Jul 29, 2020
    Member:
    #15823
    Messages:
    1,998
    Gender:
    Male
    Bay Area, CA
    Vehicle:
    2018 ORP
    Do it! Go commando!
     
    nimby and Thatbassguy[QUOTED] like this.
  16. May 3, 2023 at 9:57 AM
    #196
    nimby

    nimby in the drink

    Joined:
    Mar 27, 2017
    Member:
    #3777
    Messages:
    4,640
    First Name:
    Jake
    California
    Vehicle:
    2018 SR5P
    I think it depends on how you like to offroad.

    If you're rock crawling or on slow moving trails, KDSS is an advantage. It also has its advantages on the road.

    I think the Pro offers an advantage on faster, desert style offroading (not that you need a Pro for this because you could outperform a Pro in an SR5 or non-KDSS OR with some quality adjustable coilovers).

    Personally, I like the fast stuff :mudding:
     
    Thatbassguy likes this.
  17. May 3, 2023 at 10:20 AM
    #197
    Cowboy59

    Cowboy59 Enjoy the Adventure

    Joined:
    May 17, 2020
    Member:
    #14355
    Messages:
    936
    Gender:
    Male
    N. Florida
    Vehicle:
    2020 Off-Road Premium w/ Predator package & KDSS
    I enjoy seeing what others do to make their 4R the way they like it. I also appreciate seeing how folks have come up with solutions that suit their needs or wants.

    I don't give any energy to criticizing others choices. It's their choice and just a waste of negative energy on my part. I don't need to feel better about my choices by disagreeing with someone else's choices.

    There have been criticisms of some of my mods. It did not change my opinion of my mods or why I did them, because my mods suited my tastes and needs.

    So be happy with your 4R and make it the way you like.

    The efforts all of you have shared have helped me tremendously in my 4R improvements.

    Maybe one day we can organize a nationwide 4Runners.com gathering. It would be great to meet you all.
     
    Last edited: Sep 20, 2023
  18. May 3, 2023 at 4:35 PM
    #198
    Rocko9999

    Rocko9999 New Member

    Joined:
    Apr 21, 2023
    Member:
    #32488
    Messages:
    1,134
    Vehicle:
    2011 Limited
    Why is it people who do this are usually strange AF.
     
  19. May 3, 2023 at 5:12 PM
    #199
    kolter45

    kolter45 Inferno Pro & 4.0 Tacoma

    Joined:
    May 7, 2022
    Member:
    #26975
    Messages:
    684
    Gender:
    Male
    Denver
    Vehicle:
    Inferno Pro & BRM Sport
    Nice truck! Are those RCI sliders?
     
  20. May 4, 2023 at 10:22 AM
    #200
    MAWDAWG

    MAWDAWG New Member

    Joined:
    Mar 18, 2023
    Member:
    #31828
    Messages:
    99
    Gender:
    Male
    First Name:
    mark
    Vehicle:
    2023 4Runner TRD ORP
    i feel like anyone looking for a serious off road vehicle will want to build it themselves - doesn't make sense to pay extra for stuff that you will end up replacing
     
  21. May 4, 2023 at 11:42 AM
    #201
    josephp732

    josephp732 New Member

    Joined:
    Jan 14, 2020
    Member:
    #12714
    Messages:
    503
    Gender:
    Male
    Vehicle:
    2019 Silver Limited, 2021 White TRD OR Premium
    The original predecessor factory graphics to the 40th anniversary 4Runner:

    [​IMG]
     
    Rocko9999, nimby, Texrun50 and 2 others like this.
  22. May 5, 2023 at 1:18 PM
    #202
    Cleazy

    Cleazy New Member

    Joined:
    Dec 14, 2020
    Member:
    #18510
    Messages:
    80
    Gender:
    Male
    San Diego CA
    Vehicle:
    2021 TRD ORP MGM
    KO2 285/70/17 FN FX Pro Wheels Dobinsons Suspension 2.5/1.5 OME UCAs Sherpa Roof Rack Alpharex Luxx Tails
    kolter45[QUOTED] likes this.
  23. Sep 19, 2023 at 9:02 AM
    #203
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,450
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    I'm just gunna put this here

    FB_IMG_1695139228587.jpg
     
    Rocko9999 likes this.
  24. Sep 19, 2023 at 11:21 AM
    #204
    MoreOutdoors

    MoreOutdoors New Member

    Joined:
    May 31, 2023
    Member:
    #33163
    Messages:
    23
    Vehicle:
    2020 Off Road Premium
    Are the different trim packages associated with the VIN? So would the original trim level show up in a title search if some shady person was trying to sell an SR5 as a Pro? Never really thought about that and am now just curious.
     
  25. Sep 19, 2023 at 11:25 AM
    #205
    kmeeg

    kmeeg New Member

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    5,183
    Gender:
    Male
    But TRD Pros doesn't get the badge from factory. Will he still be watching?
     
  26. Sep 19, 2023 at 11:43 AM
    #206
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,450
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    What do you mean the PRO's dont get badges from factory, I thought they have TRD PRO written all over them, when do they get those
     
  27. Sep 19, 2023 at 11:47 AM
    #207
    kmeeg

    kmeeg New Member

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    5,183
    Gender:
    Male
    Some pics at the US port.
    upload_2023-9-19_12-46-12.jpg

    upload_2023-9-19_12-46-26.jpg
    upload_2023-9-19_12-46-35.jpg
     
    Thatbassguy likes this.
  28. Sep 19, 2023 at 11:50 AM
    #208
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,625
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    They come to the US as debadged ORP's. The stickers, decals, wheels and shocks are slapped on after they arrive. That's also why it's a good idea to get an alignment on a new PRO.
     
  29. Sep 19, 2023 at 11:54 AM
    #209
    semprenissart

    semprenissart Mèfi

    Joined:
    Dec 22, 2021
    Member:
    #24758
    Messages:
    867
    Arizona
    Vehicle:
    2022 4Runner TRD Pro (MGM)
    Westcott Sliders. Gobi no rise
    The only real way to tell if it’s a pro from factory for the current years (at least in the US) is the dual climate, and auto headlights. Everything else on an ORP can be added and turned into a pro I believe ?
     
    Last edited: Sep 19, 2023
    kmeeg[QUOTED] and Thatbassguy like this.
  30. Sep 19, 2023 at 12:14 PM
    #210
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,450
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    I see! Din know it was that much crap that gets slapped on. JC is always watching, especially at the ports!
     
    Thatbassguy likes this.

Products Discussed in

To Top