1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

KDSS existing or new owners BEWARE!

Discussion in '5th Gen 4Runners (2010-2024)' started by ColinClive, Jan 8, 2020.

  1. Apr 27, 2023 at 12:34 PM
    #271
    kmeeg

    kmeeg New Member

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    5,211
    Gender:
    Male
    Damn we are think a like..!!! :amen:
    In 2018 I found non KDSS with headed seats at Mountain States Toyota. It did had sunroof. I loved my no moonroof SR5 alot for extra headroom and little more protection from f'n hail :annoyed: Last yeah I was in hail storm in late October at Guanella Pass Geneva creek trail on top of the mountain..!! Lucky no visual damage. Didn't bothered to inspect with insurance.
     
    kolter45[QUOTED] and Thatbassguy like this.
  2. Apr 27, 2023 at 5:58 PM
    #272
    Spare Parts

    Spare Parts New Member

    Joined:
    May 13, 2020
    Member:
    #14274
    Messages:
    2,789
    Gender:
    Male
    Southern Maine
    Vehicle:
    22 LR ORP
    Sherpa Crestone. 4X Innovations Sliders
    I couldn’t find one with KDSS in 22, nor one with out the hole in the roof. The more I have hung around here, I’m happier not having KDSS, or more knowing that that expensive repair isn’t in my future.
     
    Thatbassguy and kolter45[QUOTED] like this.
  3. Apr 27, 2023 at 7:33 PM
    #273
    FN2187

    FN2187 Stormtrooper

    Joined:
    Jul 6, 2022
    Member:
    #27707
    Messages:
    1,553
    Earth
    Vehicle:
    2019 TRD ORP w/ KDSS
    Victory 4x4 Blitz front bumper Smittybilt 10k Synthetic Gobi Stealth no-rise RCI sliders Rago panels and shelf, dash mount RCI Alu skids Dobinsons 2.5/1.5 285/70 Cooper Discoverer Rugged Trek SSO Hitch Mounted Swingout Anytime Front/Rear Camera
    I chose KDSS after driving one with and one without on a really windy day and felt KDSS really helped with the wandering. I know it limits aftermarket suspensions but I only put on a mild lift anyway and it was nice for the 3 years without a lift before that. Luckily this forum warned me about keeping the actuator clean so hopefully I won't have expensive future repairs.

    As for the sunroof, I wanted that too after reading how great it is open with the back window down. I don't regret it. Would be nice to have extra headroom but I'm not a giant and I'd probably just do something stupid like put another molle panel up there :anonymous:

    As for protection, I have a gobi with sunroof insert so wasn't that concerned about it during our last hail storm
     
    Thatbassguy, kolter45 and OverRunner like this.
  4. Apr 27, 2023 at 9:32 PM
    #274
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,487
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Been meaning to peek under the KDSS hood, first time ever yikes. Not much rust surprisingly, but def gravel and dirt. I recently installed full Dr. KDSS switch kit, you really do feel the difference right away. I like to take corners fast now to feel the T4R lean

    IMG_20230427_210941_01.jpg
    IMG_20230427_210941_02.jpg
    IMG_20230427_212523690.jpg
     
    kolter45 likes this.
  5. Apr 27, 2023 at 9:32 PM
    #275
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,487
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
  6. Apr 28, 2023 at 5:16 AM
    #276
    STrooper

    STrooper Let’s Go Places!

    Joined:
    Aug 21, 2021
    Member:
    #22926
    Messages:
    615
    Gender:
    Male
    First Name:
    Jack
    Vehicle:
    14,17,2019 4runner TRD ORP / 2023 SR5P
    Do you have a diy for the KDSS switch kit control?
     
    kolter45 likes this.
  7. Apr 28, 2023 at 10:28 AM
    #277
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,487
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    STrooper likes this.
  8. Apr 28, 2023 at 11:49 AM
    #278
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,487
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    Guys so I e-taped the exposed electrical conductors before soft brush and rinse, now just send it on the clear rust inhibitor spray no taping off? (not using POR15 or Woolwax at least not yet?

    IMG_20230427_224901052.jpg
    IMG_20230427_224752807_HDR.jpg
     
    Thatbassguy likes this.
  9. Apr 28, 2023 at 12:14 PM
    #279
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    5,487
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s
    Since I dont know how close the electrical connections are or how sealed they are, personally I would brush on woolwax over the hydraulic line fittings and that manifold block. Mostly because other products have solvents and I wouldnt want to find out what they do to plastics or wiring connectors.
     
  10. Apr 28, 2023 at 12:19 PM
    #280
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    5,487
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s
    Btw, yours looks great! Good time to be doing this. Even when you coat it, I think the secret is going to be occassional inspections to make sure you dont build up a bunch of mud/dirt under those covers.
     
  11. Apr 28, 2023 at 4:29 PM
    #281
    Tooly

    Tooly New Member

    Joined:
    Mar 1, 2021
    Member:
    #20051
    Messages:
    352
    Okanagan, BC Canada
    Vehicle:
    2024 4Runner OR Solar Octane
    I just had mine opened up today while installing my sliders. A lot of grit and gravel in there but corrosion was not too bad. I cleaned it as best I could and sprayed the whole assembly with Boeshield.
     
    Thatbassguy likes this.
  12. Apr 29, 2023 at 3:23 AM
    #282
    Matt83

    Matt83 New Member

    Joined:
    Jul 11, 2019
    Member:
    #10511
    Messages:
    780
    Northeast
    The majority of folks who drive 4Runners will more then likely not know if they have KDSS or ever encounter a failure of the system. I plan on installing the Dr. KDSS control this year, I drive a lot of miles on washboarded dirt roads and see the benefit of disabling the system.
     
    STrooper likes this.
  13. Apr 29, 2023 at 4:51 AM
    #283
    STrooper

    STrooper Let’s Go Places!

    Joined:
    Aug 21, 2021
    Member:
    #22926
    Messages:
    615
    Gender:
    Male
    First Name:
    Jack
    Vehicle:
    14,17,2019 4runner TRD ORP / 2023 SR5P
    Well, the majority of people don’t know that the KDSS needs to be maintained thus they encounter problems. Right now all you hear is that it needs to be “flushed” aka cleaned, and that’s all you need to do. Nonetheless the hydraulic fluid needs to be replaced every so often to prevent system failure. Folks that do not check it frequently or worst, think it's indestructible. Hence the leaks etc.
     
    Last edited: Apr 29, 2023
  14. Apr 29, 2023 at 8:15 AM
    #284
    djwantke

    djwantke New Member

    Joined:
    Jan 31, 2021
    Member:
    #19487
    Messages:
    3,487
    Gender:
    Male
    Maple Ridge, British Columbia
    Vehicle:
    2016 4Runner Trail Premium
    Bought brand new 2016 After May 2021: -Approx 3" lift/level: Bilstein 5100's, OME 2884 590lb 3" front lift springs, SPC UCA's, ICON 158506 2" lift rear coils, diff drop -Mickey Thompson Baja ATZ LT285/70R17 Load E -Mickey Thompson Sidebiter ll 17x9, 0 offset, 5 backspace -Pro Comp black spline lugs ^installed by 4WheelParts^ -New brakes and rotors by brake shop -4-piece ARB skid kit -Smittybilt 2" nerf steps -MBRP black exhaust tip, chopped OEM -Drivers side OEM FJ oh shit handle -All blacked out emblems -Blacked out roof rails -4x WeatherTech window rain guards -OEM custom rear mud flap deletes -KICK BACK MUD FLAPS 12" WIDE - BLACK TOP AND BLACK WEIGHT -FRAM EXTRA GUARD CA10835 engine air filter -1797 LED tricolor fog bulbs Yellow 3000K White 6000K Blue 15000K 28W 4000LM -Armour paint lower rear bumper -Front bumper high stage high clearance cut -Fenders cut straight across, pink reservoir sprayed black -4Runner Lifestyle sequential fog fangs -4Runner Lifestyle smoked taillight decals -Pedal Commander -Rear passenger cargo mounted 120v truck tire pump -4x Spidertrax 1.25" black aluminum wheel spacers -Yota Twins Paracord Hatch Strap sand camo -Teton Workshop hard anodized matte black aluminum shift knob -Ditch flood lights 4 LED 20w 1400lm w/ OEM hood mounts on OEM style dash switch -Backup flood lights under bumper 6 LED 18w 1500lm on OEM style dash switch -Body Mount Chop; cut, weld, paint -Fender mount chop, re-weld, paint -Fender Liner cut behind wheel (I cut liner in front of wheel clean off at top of viper cut) -Wheel well firewall hammering, painting ^done by Arc One Industries^ -valance cap trim -Agency6 Black Shackle Block 2" US Certified 6061 T6 CNC machined aluminum -DRT fab universal hitch skid -ACDelco inner tie rods, outer tie rods, bellows -Full Dr. KDSS switch kit -March 31 Behind grille 13-1/4" 32 LED light bar + wide-angle, eagle-eye lens 6000lm on OEM style dash switch -RAA Powder coated steel roof rack cargo basket, 1" side rails, 64" x 39" x 6", 250lb limit -roof gas can, water can, shovel -PEAKTOW PTT0063 Hitch Mount Cargo Carrier 51-1/2 x 17-1/2 x 4 inches 500 lbs. Capacity (trips only) -July/2023: purchased first needed SPC balljoint replacement kit - newly released, upgraded non-zerk sealed joints 25002 -July 15/2023: The Original Universal EZ Flares, 1". All four corners -Dec. 2023: removed bumper cover and crash bar, drilled frame, installed Apex Overland KDSS Recovery Points -Jan. 2024: SPC balljoint replacement kit - upgraded non-zerk sealed joint design 25002 -Feb. 3/ 2024: 4x KC Wire Hiders, for roof rack lighting Feb. 13/2024: New ditch lights, on new Rago Fabrication Extension brackets. 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Replacing 3inch EVERGEAR clear lens ditch light pods w/ yellow lamix-x In progress: 4th, 5th, and 6th set of off road lights Electrical components and wiring purchased, not started -roof rack scene lighting - EVERGEAR ea. 1,350 lumens, 30w, 3-¾" round floods. Custom, side mounted w/ galvanized flat bar And -roof rack upper ditch lights - 3inch Quad Row Amber Pods from LED-Club. 32W 3200Lm 16-LED Spot Beam. Bar clamp mounted to front corners And -roof rack reverse amber pods / secondary hazard lights. 20W 2000Lm 2-LED Spot Beam. Bar clamp mounted to rear side And -roof rack F1 smoked chase light w/ lighting effects. Custom bolted to rear side -POR15 rust proofing line-up, 3-step process PAUSED until 70⁰ weather Bought, in the garage queue: -BlueFire 6-Circuit Fuse Block with LED Indicator & Protection Cover -Blue Sea Systems 100A Circuit Breaker w/ reset lever -Rust prevention •New can POR15, 2x Black Fluid Film, long spray nozzle attachments, 2x PB Surface Shield, 1x Chainwax •partially used POR15 Degreaser, Metal Prep Wanted - PerryParts or Wheelers bump stops, self fabricated limb risers (seasonal, removable), 1" body lift, powder coated center winch bumper w/ large bar (got no tss), rear steel bumper w/ tire carrier for an LT285 Kumho on steely, sliders, bolt on cat shields
    THANKS @McSpazatron
    Woolwax these baby's too eh?
    This rear KDSS?
    IMG_20230429_081348119~2.jpg
     
  15. Apr 29, 2023 at 7:57 PM
    #285
    ElectroBoy

    ElectroBoy Ad astra

    Joined:
    Jul 29, 2020
    Member:
    #15823
    Messages:
    2,002
    Gender:
    Male
    Bay Area, CA
    Vehicle:
    2018 ORP
    That’s a new bit of information. Please point to where this is specified in the Toyota maintenance documentation.
     
  16. Apr 29, 2023 at 8:12 PM
    #286
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,644
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    I haven't heard of this either. It seems like it would be a bitch to bleed the air from the system.
     
  17. Apr 29, 2023 at 9:11 PM
    #287
    STrooper

    STrooper Let’s Go Places!

    Joined:
    Aug 21, 2021
    Member:
    #22926
    Messages:
    615
    Gender:
    Male
    First Name:
    Jack
    Vehicle:
    14,17,2019 4runner TRD ORP / 2023 SR5P
    There is probably no info in the manual for maintenance for the KDSS(they probably leave that for the dealer$hip to advise you:evil:) My mechanic recommends to bleed the hydraulic fluid at least every 35k miles. Here is a video from someone changing the system perhaps b/c it wasn’t maintained and got a warning code.
    https://youtu.be/xhRUxX4ySf4
     
  18. Apr 30, 2023 at 5:05 AM
    #288
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,644
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    So, Toyota doesn't recommend changing the fluid, but your mechanic does?

    I'd think if it were required, it would be in the maintenance schedule. I also think you'd have a better chance of causing problems by opening up the system rather than just leaving it alone.
     
    RumHamRunner73 and OverRunner like this.
  19. Apr 30, 2023 at 6:22 AM
    #289
    STrooper

    STrooper Let’s Go Places!

    Joined:
    Aug 21, 2021
    Member:
    #22926
    Messages:
    615
    Gender:
    Male
    First Name:
    Jack
    Vehicle:
    14,17,2019 4runner TRD ORP / 2023 SR5P
    I had the same question and the easy answer he gave me was that anything that operates with fluids should be maintained and thus the KDSS system has a drainage for it. He also quote that the hydraulic pressure changes specifically if you are OR and the majority of the leaking issues could have been prevented by a simple hydraulic fluid change and regulate the pressure etc. Think about it, have you heard of a dealership or perhaps a car manufacturer/manual advising not to change your transmission fluid? Crazy right? Well, there is car owners that still change the TF because is the obvious thing to do and don’t want to replace the transmission when that day comes.
     
    Last edited: May 1, 2023
  20. Apr 30, 2023 at 7:22 AM
    #290
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,644
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    It makes sense that things should require maintenance, but I would still have concerns about going off the opinion of some mechanic over what the Toyota engineers decided was or wasn't necessary.

    Is he offering to perform this maintenance, and then cover any repairs that end up being required? Just in case you would end up with problems due to air getting in the system, or maybe a valve, or the accumulator getting damaged during the process.

    How does he know what fluid to use? I'd assume it's probably regular brake fluid, but I don't believe it's specified in the manual.

    If there's something in the FSM about this, I'd be interested in seeing what it says.

    Have you done this fluid change yet? If so, how many miles since the procedure, and have you had any issues? I'd assume not, because otherwise you wouldn't be recommending it.
     
    harperspop likes this.
  21. Apr 30, 2023 at 8:31 AM
    #291
    STrooper

    STrooper Let’s Go Places!

    Joined:
    Aug 21, 2021
    Member:
    #22926
    Messages:
    615
    Gender:
    Male
    First Name:
    Jack
    Vehicle:
    14,17,2019 4runner TRD ORP / 2023 SR5P
    I don’t have a KDSS. Couple years ago I saw him doing a flush on a GX and I asked him the question. What he said made sense to me, I believe any moving parts fluids etc needs maintenance. He is a master mechanic that have worked with Honda and Toyota for 30yrs combined and now working from his home for a long time as well.
     
    Thatbassguy[QUOTED] likes this.
  22. Apr 30, 2023 at 8:45 AM
    #292
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,644
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch
    I agree with your logic there. I'm probably just paranoid about messing with it.

    I think Toyota could have done better with KDSS. It's such a great concept, but maybe not executed as well as it could have been.

    I'm looking forward to seeing if they improve the next version. The new E-KDSS on the current Landcruiser looks like an improvement. Hopefully the next 4Runner gets an improved version as well.
     
  23. Apr 30, 2023 at 3:13 PM
    #293
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    5,487
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s
    This is a concern for long term owners. And the fact these can corrode easily, means that anybody buying used should inspect this system to avoid heartbreak.
     
  24. May 13, 2023 at 9:08 PM
    #294
    TheRhythmic

    TheRhythmic New Member

    Joined:
    May 13, 2023
    Member:
    #32877
    Messages:
    2
    Gender:
    Male
    Hey all.

    New here. Have a deposit on a '13 Trail Edition - just noticed that there's a small, yellow indicator in one of the dash pictures that says "KDSS". Waiting to hear back from dealer if this is on consistently - either way, I'd like to know the above as well:

    If (and when) some component within the KDSS system fails, is it possible to just replace it with a standard sway bar system?

    Thanks,

    J
     
  25. May 13, 2023 at 10:02 PM
    #295
    Thatbassguy

    Thatbassguy New member? Really??

    Joined:
    Mar 27, 2019
    Member:
    #9314
    Messages:
    13,644
    Gender:
    Male
    First Name:
    James
    S/E Wisconsin
    Vehicle:
    2019 TRDORP, KDSS, MGM
    RSG sliders, Yakima offgrid basket, Pro-Comp wheels, SOS Streamline bumper and skids, Warn VR EVO10S winch + Ultimate Sidewinder, Bilstein 6112 + 5100 + rear lift coils, Rigid Dually SS ditch lights w/Caliraised brackets and OEM style dash switch

    The KDSS light on the dash will flash at startup. If it is on at any other time, there's a problem. Good call looking into it!

    The mounting points for the standard sway bars are different, and not installed on KDSS 4Runners. You'd have to weld them onto the frame .
     
  26. May 13, 2023 at 10:33 PM
    #296
    TheRhythmic

    TheRhythmic New Member

    Joined:
    May 13, 2023
    Member:
    #32877
    Messages:
    2
    Gender:
    Male
    Thanks for this. Dealer had originally sent me a vid with the car running in park. Sadly, I went back and could see the KDSS light on.

    They’ll definitely need to take it to a Toyo dealer and even then, I’ll have trouble trusting them. Shame. This would be my first 4runner and I LOVE the 2010-2013 Trail models.

    I was planning to pay for my own pre purchase inspection before buying - the dealer did their own as well. Saw the print out and all. Suspension system cleared.

    Wild that they’d miss that…

    j
     
    Thatbassguy[QUOTED] likes this.
  27. May 14, 2023 at 7:58 AM
    #297
    kmeeg

    kmeeg New Member

    Joined:
    Apr 18, 2018
    Member:
    #5853
    Messages:
    5,211
    Gender:
    Male
    With my experience Toyota dealerships are never to be trusted. On 2 different dealerships I was charged for oil change but had old oil, another time skid plate bolt threads were cross threaded, another time one of the bold almost cross threaded just half way in, another time oil filter plate not installed, the biggest accident repair not done properly and service manager deny when I show driveability issues me having to complain to Toyota corporation and having to settle directly with the dealership General Manager.

    Really hope that you have Toyota specialist pre-purchase tech. I doubt general tech would know about special things like KDSS, XREAS or may be even to check front diff actuator vs bearing (part-time vs full-time). And many other to check closely vs checking for oil leaks & coolant checked on other vehicles.
     
  28. May 14, 2023 at 10:06 AM
    #298
    McSpazatron

    McSpazatron New Member

    Joined:
    Feb 16, 2021
    Member:
    #19810
    Messages:
    5,487
    Gender:
    Male
    Vehicle:
    2021 4runner OR
    Dobinson IMS Warn Bumper CaliRaised Sliders 285/70 K02s
    Good catch! I’m sure somebody at the used car dealer knew that light wasn’t just there for looks.

    I think it’s wild that they missed the malfunction light when they bought the vehicle for their inventory. Now that they screwed up, they have to sell it somehow… to someone. I suppose after you, they’ll try to sell it to some unaware buyer. If that doesn't work, then they’ll probably need to get rid of it at auction.

    The early 5th gen trails are my favorite too! Good luck with your hunt!
     
    Thatbassguy likes this.

Products Discussed in

To Top