Dashcam - which fuse?

2022 Limited adding dashcam, anyone have a recommendation for a fuse location for add-a-fuse. (Switched)

 

Which camera are you running and how do you plan to run it?

 

is the dashcam powered by a USB-A cable? If you have the autodim rear view mirror you should be able to use one of these guys.

https://www.amazon.com/gp/product/B08FQ7C9B8?smid=A1ZURKM38KV5LC

 

Using a viofo A119 out for my old car. Have the existing cable to add to fuse box. My limited does not have access port on rear view mirror and I currently have everything I need to install.

 

P/OUTLET is ACC switched.

 

Good call, p outlet it is. Thanks to all of you.

 

Oppps, add a fuse limited to 10amps. P outlet is 15. So, will find another slot.

 

Tap it into the rear view mirror. There are easy easy easy kits on Amazon with the connector and fuse built in. I did my radar detector that way. Very clean install

 

I will take a look. Tks.

 

yeah no problem and if you still go to the fuse panel go with the 7.5 ACC fuse in the bottom right of your picture. That way when you turn on the car it turns on and when you shut it off it also shuts off

 

Ordered the dongar rear view mirror wiring. Hope to get it next week. Thanks.

 

Awesome. Congrats. You will love how clean your install looks.

 

✔️

 

I watched a few videos on the Dongar adapter installation. This one was the most helpful.

 

Thanks Cap’t, seems simple enough.

 

Well, not totally simple. It was a little struggle with the plastic pieces, BUT all is well that ends well. Very happy with the result. Thanks for the help!