Hello... and my little build

Hello All! New member-ish here, I didnt feel I had anything worth posting just yet as Ive been stockpiling parts through this winter. Here is my build, its a work in progress as I'm learning with 4Runners your never really done.


It all started with this...

Her: Make it so this thing never gets stuck up here.
Me: Its a 4runner, it wont get stuck.
Her: It looks like all the other ones, make it look cool and never get stuck.
Me: Ok fine.


2023 TRDOR

• King Front and Rear with adjusters set to 2.5 in the front and 1.5 in the rear.
• KDSS Rear Spacer
• I went with a heaver front and rear springs. Im planning on adding a winch and bumper at a later time, nothing is planned for the rear (as of now).
• SPC UCA's
• SCS Wheels with -10 Offset.
• Nitto Ridge Grapplers 285/70/R17

Here is before:

In the shop getting an alignment...

Fresh out of the shop.

Fronts

Rear


I still need to take some better pictures.

I didnt have to cut the any of the inner fenders to clear my wheels, which kind of makes me nervous. Everthing Ive read says Id need to cut something, which worries me.

Here is my alignment report, does it look right?

Thanks,

 

Looks nice. Now get out and hit some dirt to stretch out the suspension and make some noise that will let you know a trim and a tuck here and there might be needed.

 

More caster.

 

Looks amazing! You need more castor though. Shouldn’t be tough to get over 3*.

 

Looks stunning!

 

Thank you! Its still a work in progress, lol.

 

Been a little busy, but I was able to give her a coat of wax and install PPF on the lower half. Im still on the fence of the PPF lasting.

 

I deleted my roof rack and apparently apple has a new crop feature.....hmmm.