1. Welcome to 4Runners.com!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all 4Runner discussion topics
    • Transfer over your build thread from a different forum to this one
    • Communicate privately with other 4Runner owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Ultragauge not powering up when plugged in '99 Runner

Discussion in '3rd Gen 4Runners (1996-2002)' started by Shauncho, May 16, 2014.

  1. May 16, 2014 at 10:03 AM
    #1
    Shauncho

    #1
    Shauncho [OP] New Member

    Joined:
    Apr 6, 2014
    Member:
    #11
    Messages:
    120
    Gender:
    Male
    For some reason my Ultragauge isn't powering up. I tested it on another vehicle and it works. I checked all the fuses in the Runner and none of them are blown. the OBD2 plug itself looks to be in good condition. I emailed support and they recommended checking pin 16 with a multimeter as that should be supplying power. Haven't had a chance to do that yet but probably will tonight.
    • If that's getting power, what other things could I check?
    • Anyone else have this problem?
     
    Shauncho, May 16, 2014
    #1
  2. May 16, 2014 at 8:03 PM
    #2
    Shauncho

    #2
    Shauncho [OP] New Member

    Joined:
    Apr 6, 2014
    Member:
    #11
    Messages:
    120
    Gender:
    Male
    Never mind... I'm a dumbass and didn't check every fuse well enough. Ended up being the OBD fuse under the hood.
     
    Shauncho, May 16, 2014
    #2
Register FREE to Reply!
To Top