What have you done to your 5th Gen 4Runner today?

got it thx!

 

love it!!

 

People who complain about the cost of such items need to see posts like this. Alot of time and experience goes into R&D. Keep up the great work!

 

So after some quick guidance from Crickey Mike it turns out my installer did not set the seat height based on the correct measurements. He left off about an inch worth of measurement, therefore meaning I'm sitting at 3.5" which is my kits max ride height.

I'm glad ya'll brought this to my attention - I probably wouldn't have known otherwise! Have to decide between dropping an inch and realigning (for the third time), or leaving it at this height and installing a diff drop kit and possibly adding rear brake line extensions...

 

My birthday was last week so I got some little goodies for the 4R -

Blacked out the little chrome strips in my grille:


Added plastic protection to the seat backs of the trunk:

 

New wheels and tires on today.

 

Thank you very much! I use Creo software.

 

So ya to answer your question more directly, I'm at exactly 38" with 33's (33" diameter), so with your stock 31" (31.6" diameter) ride height of 34-1/2 I should be sitting at 2.1" lift (38 minus 34-1/2+1.4).
OME 2884 approx 3" lift springs are 590lbs and I have barely any added weight. Rear end is at 39-1/2". So why am I at 2"

 

Nothing done to it, but thinking to myself while I wait at the school pickup line; what a good balance 4runner has with V6 engine and 23gal tank, even with 285/70R17 tires I could still go 300 miles in city. Probably refuel tomorrow..

 

How many MPGs does the fuzzy steering wheel cover save?

In all seriousness though I can still manage 350+ with 295s with my 4Runner. I used to average ~385 with stock tires. My buddy just picked up a 2023 ORP and says he's only getting 12MPGs. Guess he's got a heavy foot.

 

That cheap Amazon steering wheel cover is from my 2018 4runner. It also survive from my constant imaginary bass guitar playing on the edge of it listening to music

 

for me to get my front up to 38” i would have to do a 3.5-4” lift. I dont get it. Maybe those OME springs are really increasing the height.

 

Going camping next week in Big Sur...got a Rotopax for dog water.

 

@BobbyB fixed my math for me hahaha I believe I'm at 2.8"! Ground to fender would be 0.7" increase from 31's to 33's, not the full 1.4" tire difference. Question is, does everyone have suspension settling and what's normal

 

Looks great! Are the wheels powder coated?

 

Ordered a Toytech Boss 2.0 with kit and UCA plus some new socks and shoes (wheels and tires)...




The tires are Nitto Ridge Grapplers 285/70/17
Glad I joined here... I think you guys will keep me going in the right direction.

 

Installed a MillerCat cover and an LED bulb kit for the interior lights from Diode Dynamics.

 

install a smoke 3rd brake light tonight and this past weekend did the full canvasback from the front sets to and including the back hatch, doors and sides. we have big dogs , they can trash the back

 

Please keep us up on the full Canvasback. Mine is being shipped as of yesterday and I have a husky that is very busy and hard on stuff as well so I am interested to hear how it holds up. Any picture as well to share?

 

What kind of dogs? I am trying to figure out the best option for a Great Dane. Right now he's only 6 months old at 70 lbs, but projected to be 140 lbs. He is still unsure about putting his head out the window so we have some time haha

 

We 2 fat labs 90*&95*then 2 large Germansheppards 119* & 126*. The canvas back is great on the floor,I'm not sure about the sticky straps that holds on it to the sides,back doors and hatch,but time will tell.i will post pictures when I get home,don't have them on my phone

 

Tinted out my windows today and added a brow. The sun can be brutal in my part of the Earth.

 

Got rid of the 20" Limited wheels. I will be posting them for sale later today in the marketplace forum in case anyone is interested in them. Tires have 18K on them and they will have the TPMS sensors too. Set of 5

 

basic minor stuff to new SR5P recently: Added Lasmat and Husky cargo liners and blacked out emblems all around. Next: Paint roof rails black, front tint and side deflectors, hyperdip wheels to anthracite gray, and speaker/audio upgrades. TBD on hood deflector - can't decide if I want one.

Sidenote - anyone know of any aftermarket arm rest for driver side door? That door is narrow as hell - need just a tad more meat on the door (or my arm, lol).

 

Today I installed my puddle lights. I have learned a few things while installing them, 1) did not have to remove the mirrors to access the screws, 2) I only have to remove the back cover to access the screws, 3) did not know that I had heated mirrors. Does anyone know where the harness is so I can use that feature? Puddle lights are bright and lights up the ground when I unlock the doors. Glad I got them.

 

Which ones did you get? I like those features as well.

 

TRD Skidplate and blackout emblems

 

Fram should be avoided, period.

 

Im not sure where the harness is, or what harness you mean, but if you have heated mirrors, you should also have this button, no?

 

what do you guys like to use?