KC | *Brand New* LED Reverse Lights

​

Here is the official, first release of our brand new LED reverse light kit! It is a two light kit and cranks out 1800 lumens, making it a perfect reverse, flood, work, or camp light setup.



We are also running our first ever T4R group buy on these right now through mid-September!

Product Link

LINK TO GROUP BUY


FEATURES

• 2 x 10W 3" LZR Cube LED Flush Mount Lights
• Durable Diecast Aluminum Housing
• UV Resistant Powder Coated Flush Mount Plate
• Shatter Resistant Polycarbonate Lens
• Forward Facing Reflector Optics
• 40° Flood Beam Pattern
• Extended wiring harness included
• 23 year warranty

LIGHT PERFORMANCE (PER LIGHT)

• Raw Lumens: 900 lm (1800 total)
• LUX @ 10 meters: 12 lx
• Candela: 1,200 cd
• Beam Distance (Meters): 69m

SPECIFICATIONS (PER LIGHT)

• Wattage: 10W (20W total)
• LED Source: CREE LED
• LED Color: 5000K
• Amp Draw: 0.9A
• Voltage: 10V-30V
• IP Rating: IP67

Product Dimensions: W - 3.00 x H - 3.4" x D - 3.00"


Here's our install guide --> http://www.kchilites.com/downloads/...t_bezel_template_for_lzr_led_backup_light.pdf

 

This is a dumb question because I know zero about electrical. Could these be ran just right off the reverse light wires? Or is this one of those things that need power straight from the battery?

 

Not a dumb question my man.

So you'd want them to be powered via the vehicle battery and use the relay that comes with the kit. However, if you can find the wire that powers on the reverse lights in your taillights, you could tap into that and use that instead of the switch that comes with it. That would mean any time the truck is in reverse, these lights go on.

 

Cool sounds good. I figured as much but my lazy came out a little bit so I had to ask haha.